Testomat: hardness controller

Cable duct clamping range: 4.5 mm – 10 mm external diameter · Ambient temperature: 10 to 40°C · Material flammability rating: V1 or better

The Testomat EVO TH is an online analysis instrument for automatic determination and monitoring of residual total hardness in water.

The terminal block connections are: PE (Protective earth conductor), N (Neutral conductor), L (Phase). For consumers, switched neutral (n) and switched phase (l) are available (max. 4 A) · Water Pressure: 0.3 bar to 8 bar. Avoid strong pressure fluctuations · Water Temperature: 10 °C to 40 °C. For temperatures above 40 °C, a cooler is recommended

The Testomat 2000 is an online analysis unit for water treatment applications, designed to automatically determine residual total hardness, carbonate hardness.

Standard inlet connection: Plug connector for plastic hoses 6/4 x 1 (external diameter 6 mm / internal diameter 4 mm, wall thickness 1 mm) · Water outlet connection: Opaque outlet hose (internal diameter 14 mm) · Water Pressure: 0.3 to 8 bar (instrument is factory set for 1 to 8 bar; flow controller valve body must be removed for 0.3 to 1 bar range). Avoid strong pressure fluctuations

The Testomat 2000 DUO is an online analysis instrument capable of monitoring residual total hardness, carbonate hardness.

Water Pressure: 0.3 bar to 8 bar. Avoid strong pressure fluctuations · Measuring Water Temperature: 10 °C to 40 °C. For temperatures above 40 °C, a KCN type cooler should be installed · Terminals 28-29 (Analog/Serial Output): For 0/4-20 mA or RS232 interface

The Testomat 2000 CAL is an online analysis unit designed to measure and monitor water hardness and other water quality parameters in various water treatment applications.

Water Inlet Connection: Standard for plastic hoses 6/4 x 1 (6 mm OD / 4 mm ID, 1 mm wall thickness). Maximum hose length: 5 m · Water Outlet Connection: For outlet hose with 12 mm internal diameter · Operating Pressure: 0.3 to 8 bar (factory setting). Can be adjusted to 0.3 to 1 bar by modifying the flow controller

Testomat Eco is an online analysis instrument designed for automatic determination and monitoring of residual total hardness in water. It offers menu-driven operation.

Total Chlorine Measurement Range: 0 – 2.5 ppm (or mg/l) · Water Inlet Connection: Standard plug connector for plastic hoses 6/4 x 1 (external diameter 6 mm / internal diameter 4 mm) · Operating Pressure: 0.3 to 8 bar (factory setting), adjustable to 0.3 to 1 bar by removing flow controller valve body

The Testomat 2000 CLT is a self-cleaning process photometer designed for online monitoring of total chlorine in drinking water applications.

Total Chlorine Measuring Range: 0 – 2.5 ppm · Free Chlorine Measuring Range: 0 – 2.5 ppm · Operating Pressure Range: 0.3 to 8 bar (with flow controller valve body removed for 0.3 to 1 bar range)

The Testomat 2000 CLF is a process photometer designed for online analysis of free chlorine using the DPD method. It operates within a pressure range of 0.

pH range: 4 - 10.5 · Hose connection (standard): Opaque plastic hoses 6/4 x 1 (external diameter 6 mm/internal diameter 4 mm) · Hose connection: Internal diameter 14 mm

The Testomat 2000 THCl is a process photometer and titrator for monitoring total chlorine and water hardness. It operates within a pH range of 4 to 10.

Pressure range: 0.3 to 8 bar (factory setting). Can be adjusted for 0.3 to 1 bar by removing the flow controller valve body · pH range: 4 – 10.5 · Measurement range: 0 – 1.0 mg/l dissolved iron (II)+(III)

The Testomat 2000 Fe is a process photometer designed for the colorimetric analysis of dissolved iron (II)+(III) in applications like de-ironing plants or process and...

Measuring range (Silica SiO₂): 0.3 - 1.2 ppm · Power supply: Depending on product configuration: 24V / 115V / 230V, 50 – 60 Hz · Ambient temperature: 10 – 40 °C (50 - 104°F)

The Testomat 808 SiO2 is a silica monitor designed for sterilization of hospitals, compliant with EN 285:2006. This instrument operates with a silica measuring range of 0.

Power supply: Depending on product configuration: 24V / 115V / 230V, 50 – 60 Hz · Water hardness: 0.02 – 3 °dH (0.4….54 ppm CaCO₃) · Mains protection for consumers: max. 4 A (n, l)

The Testomat 808 is a limit value monitoring device designed for water hardness control in applications such as reverse osmosis and pure water production.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat ECO is an automatic water hardness analyzer for use in water treatment and drinking water plants. It offers a measuring range of 0.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (50–60 Hz) · Carbonate hardness: 0.5–10.0 °dH / 0.18–3.58 mmol/l · Acid capacity: 1.0–20.0 °dH / 0.30–7.16 mmol/l

The Testomat ECO C is an automatic titration instrument designed for determining carbonate hardness or acid capacity.

Measuring range: 0.05-25 °dH water hardness (depending on indicator choice) · Power supply: 230 VAC, 24 VAC (50–60Hz) or multi-voltage power supply unit 100-240 VAC / 100-353 VDC · Ambient temperature: 10–40 °C (50 - 104°F)

The Testomat EVO TH is an automatic water hardness controller utilizing titration to determine hardness in various water treatment applications.

Power supply: 230–240 VAC, 115 VAC, 24 VAC, all 50–60 Hz · Water hardness: 0.05-25 °dH · Carbonate hardness: 0.5-20 °dH

The Testomat 2000 is an automatic titrator used for determining water hardness, carbonate hardness, and p- or m-values in various water treatment applications.

Selection cues: measuring range · accuracy · output signal and process connection

The Testomat 2000 CN is an online water hardness analyzer designed for the Chinese market, featuring a Mandarin menu. It operates within a pressure range of 0.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Water hardness: 0.05–25 °dH · Carbonate hardness: 0.5–20 °dH

The Testomat 2000 CAL is a water quality controller designed for applications where instrument calibration is critical, such as in the pharmaceutical industry.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 V is a control system for monitoring water hardness and carbonate hardness in blending water applications, such as cooling circuits and process water.

Power supply: 230–240 VAC, 115 VAC, 24 VAC all 50–60Hz · Ambient temperature: 10–45 °C, 50 - 104°F · Water temperature: 10 to 40 °C; 50 to 104°F

The Testomat 2000 self-clean is a hardness controller designed for difficult water conditions, featuring an integrated dosing pump for cleaning agents.

Power supply: 230–240 VAC, 115 VAC, 24 VAC, all 50–60 Hz · Water hardness: 0.05-25 °dH · Carbonate hardness: 0.5-20 °dH

The Testomat 2000 Antox is a water quality controller designed for applications where oxidizing agents may cause measurement errors.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Operating pressure: 1 to 8 bar (15 to 116 psi) or 0.3 to 1 bar (5 to 15 psi) after removing the valve body from the regulator/filter housing · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000® DUO is a special design of the Testomat 2000®. It can measure two different parameters simultaneously, such as two measuring ranges for water hardness.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Water hardness: 0.05–25 °dH · Carbonate hardness: 0.5–20 °dH

The Testomat 2000 DUO CN is a water quality monitoring instrument for treatment, blending, and drinking-water plants, featuring an operating menu in English or Mandarin.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 CLF is a process-photometer designed for online monitoring of free chlorine in applications like drinking water, swimming pools.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (50–60 Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 CLT is a process-photometer designed for monitoring total or free chlorine in drinking water, swimming pools, and industrial applications.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Power consumption: max. 30 VA · Degree of protection: IP 65

The Testomat 2000 CLT self clean is a process photometer designed for disinfectant monitoring in drinking and process water, with applications in medical technology.

Chlorine Dioxide (ClO₂) measurement range: 0–4.7 mg/l (ppm) · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Ambient temperature: 10–45 °C (50 - 104°F)

This is a wet-chemical online process photometer designed for monitoring chlorine dioxide content in drinking and process water. It features a measurement range of 0–4.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Operating pressure: 1 to 8 bar (15 to 116 psi) or 0.3 to 1 bar (5 to 15 psi) after removing the valve body from the regulator/filter housing · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 THCL is a process photometer for measuring both chlorine and water hardness in a single unit. It operates with feed water pressures from 0.

Bromine (Br₂) range: 0–5.6 mg/l (ppm) · Power supply: 230–240 VAC, 115 VAC, 24 VAC all 50–60Hz · Ambient temperature: 10–45 °C (50 - 104°F)

The Testomat 2000 Br is a wet-chemical online instrument designed for monitoring bromine content and the dosing of disinfectants.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 CrVl is an online process photometer designed for monitoring chromate and hexavalent chromium in wastewater. It operates with mains water supply.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 Fe is a wet-chemical online monitor for the photometric analysis of iron content.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 Polymer is a wet-chemical online monitor designed for the continuous measurement of polyacrylate content in cooling and heating circuits.

Measuring range: 0.0-10.0 mg/l · Accuracy: < 10% at end of measuring range · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz)

The Testomat 2000 PO4 is a wet-chemical online monitor designed for phosphate content analysis in process water, production water, and wastewater.

Sulphite: 0.0 - 9.9 mg/l and 10 - 20 mg/l · Supply Voltage: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Power Consumption: max. 30 VA

The Testomat 2000 SO3 is a wet-chemical online instrument that monitors sulphite content using the colorimetric method for boiler feed water.

Power Supply: 230–240 VAC, 115 VAC, or 24 VAC (all 50–60 Hz) · Power Consumption: max. 30 VA · Degree of Protection: IP 65

The Titromat KH is an automatic controller designed for determining and monitoring carbonate hardness.

Power supply: 230–240 VAC, 115 VAC, or 24 VAC (all 50–60Hz) · 0.05 - 1.00 °dH (resolution: 0.025 °dH) · 0.09 - 1.80 °f (resolution: 0.045 °f)

The Titromat M1 is an automated controller for monitoring low carbonate hardness ranges in applications like boiler feed water corrosion monitoring and residual...

Weight: ca. 9.5 kg · Water temperature: 10 to 40 °C · Supply voltage: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz)

The Titromat M2 is an automated controller for monitoring carbonate hardness in low measuring ranges.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · 2.5–50.0 °dH (resolution: 2.5) · Power consumption: max. 30 VA

The Titromat TH is an automated controller for monitoring carbonate hardness in drinking water and raw water applications. It features a measuring range of 2.5–50.0 °dH.

Selection cues: measuring range · accuracy · output signal and process connection

This is a maintenance and service set for Testomat ECO hardness controllers and other Testomat devices. It includes various O-rings, gaskets, fuses, sight glasses.

Selection cues: measuring range · accuracy · output signal and process connection

These are maintenance instructions for the Testomat 2000® and Testomat ECO® hardness controllers. Regular maintenance is crucial for trouble-free operation.

Selection cues: measuring range · accuracy · output signal and process connection

This document provides maintenance and service instructions for the Testomat® 808 hardness controller.

Selection cues: measuring range · accuracy · output signal and process connection

This document provides maintenance and service instructions for the Testomat 808 SiO2 water quality analyzer. It details required staff qualifications, safety information.

Selection cues: measuring range · accuracy · output signal and process connection

These are service cases and spare parts for Testomat 2000 and Testomat 808 hardness controllers. Available kits include various O-rings, gaskets, fuses, pump heads.