Quay lại Testomat: hardness controller
Testomat logo

Tóm tắt tài liệu kỹ thuật

Testomat 2000 self clean

Engineering summary from PDF text extraction for Testomat 2000 self clean. Verify every value with the OEM datasheet.

Summary

Product identification

Testomat 2000® self clean is a special version of Testomat 2000® with an additional dosing pump for cleaning or disinfecting agents.

Application

  • Use for difficult water, e.g. calcium, biofilms, various other deposits
  • Extending service life
  • Reducing contamination in the measuring chamber

Operating limits

  • Ambient temperature: 10–45 °C, 50 - 104°F
  • Water temperature: 10 to 40 °C; 50 to 104°F

Mains water supply

  • Operating pressure: 1 to 8 bar (15 to 116 psi) or 0.3 to 1 bar (5 to 15 psi), after removing of the valve body out of the regulator/filter housing
  • Water inlet: Opaque hose with 6 mm external diameter/4 mm internal diameter
  • Water outlet: Hose with 6 mm external diameter/4 mm internal diameter

Measuring range

  • Water hardness: 0.05-25 °dH
  • Carbonate hardness: 0.5-20 °dH
  • p-value: 1-15 mmol/l
  • minus m-value: 0.05-0.5 mmol/l (depending on the choice of the indicator)

Electrical

  • Power supply: 230–240 VAC, 115 VAC, 24 VAC all 50–60Hz
  • Power consumption: max. 30 VA
  • Protection class: I
  • Degree of protection: IP 65

Mechanical / hydraulic

  • Dimensions (B x H x T): 380 x 480 x 280 mm
  • Weight: approx. 9.5 kg
  • Menu languages: German, English (others upon request)
  • Option: booster pump (see accessories)

Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.