
Tóm tắt tài liệu kỹ thuật
Testomat 2000 Antox
Engineering summary from PDF text extraction for Testomat 2000 Antox. Verify every value with the OEM datasheet.
Summary
Product identification
Testomat 2000® Antox is a special version of Testomat 2000® with an additional pump for dosing a reducing agent. It is designed to control water quality in areas where measurements can be affected by oxidizing agents like chlorine, chlorine dioxide, or ozone.
Application
- Control of water quality in areas where measurement errors can arise due to oxidizing agents.
Measuring range
- Water hardness: 0.05-25 °dH
- Carbonate hardness: 0.5-20 °dH
- p-value: 1-15 mmol/l
- Minus m-value: 0.05-0.5 mmol/l (depending on the choice of the indicator)
Technical Data
Electrical
- Power supply: 230–240 VAC, 115 VAC, 24 VAC, all 50–60 Hz
- Power consumption: max. 30 VA
- Protection class: I
Mechanical / hydraulic
- Degree of protection: IP 65
- Dimensions (W x H x D): 380 x 480 x 280 mm
- Weight: approx. 9.5 kg
- Menu languages: German, English, French, Italian, Polish (others upon request)
- Option: booster pump (see accessories)
Operating limits
- Ambient temperature: 10–45 °C (50 - 104°F)
- Water temperature: 10 to 40 °C (50 to 104°F)
Feed water
- Operating pressure:
- 1 to 8 bar (15 to 116 psi)
- 0.3 to 1 bar (5 to 15 psi), after removing the valve body from the regulator/filter housing
- Water inlet: Opaque hose with 6 mm external diameter / 4 mm internal diameter
- Water outlet: Hose with 6 mm external diameter / 4 mm internal diameter
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.