
Tóm tắt tài liệu kỹ thuật
Testomat
Engineering summary from PDF text extraction for Testomat. Verify every value with the OEM datasheet.
Summary
Product identification
- Product: Testomat 808 SiO2
- Application: Sterilisation of hospitals, silica monitoring
Operating limits
- Silica (SiO₂) measuring range: 0.3 - 1.2 ppm
- Ambient temperature: 10 – 40 °C (50 - 104°F)
- Water temperature: 10 to 40 °C (50 to 104°F)
Feed water
- Operating pressure:
- 0.3 – 1 bar (0.3 x 10⁵ to 1 x 10⁵ Pa)
- 1 - 4 bar (1 x 10⁵ to 4 x 10⁵ Pa)
- (Note: A pressure reducer is recommended from 4 to 8 bar)
- Water inlet hose: 6 mm external diameter / 4 mm internal diameter
- Water outlet hose: 6 mm external diameter / 4 mm internal diameter
Electrical
- Power supply: 24V / 115V / 230V, 50 – 60 Hz (depending on configuration)
- Instrument protection: T0,1 A (230-240V); T0,2 A (115V); T0,8 A (24V)
- Mains protection for consumers: max. 4 A (N, L)
- Power consumption: max. 16 VA (without external load)
- Protection class: I
- Current interface: Output of defined values (5, 8, 11, 14, 17, 20 mA); max. load 500 Ohms
- Contact load relay: 230V / 4A AC ohm resistive load
Mechanical / hydraulic
- Dimensions (W x H x D): 364 x 314 x 138 mm
- Dimensions with side pocket: 442 x 314 x 138 mm
- Weight: 4350 g
- Degree of protection: IP 54
Conformity
- EN 285:2006
- EN 61000-6-2
- EN 61000-6-4
- EN 61010-1
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.