
Tóm tắt tài liệu kỹ thuật
Testomat 2000 DUO
Engineering summary from PDF text extraction for Testomat 2000 DUO. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: Testomat 2000® DUO
- Description: Online analysis instrument for water hardness, carbonate hardness, p-value, or minus m-value.
Intended use
The Testomat 2000® DUO is designed for the automatic determination and monitoring of residual total hardness (water hardness), residual carbonate hardness, as well as the minus m-value and p-value in water. Measurement parameters and ranges are determined by indicator selection and user programming.
Performance specifications
- Menu-driven operation and programming via plain text display.
- Measures residual hardness, total hardness, carbonate hardness, minus m-value, p-value via indicator selection.
- Freely selectable hardness unit: °dH, °f, ppm CaCO₃, or mmol/l.
- High measuring accuracy provided by a precise piston-dosing pump.
- Analysis initiation methods:
- Automatic interval operation (interval pause settable from 0-99 minutes).
- External control.
- Quantity dependent via impulse water meter.
- Two independent limit values with hysteresis (1, 2, or 3 bad analyses) and settable switch functions.
- Monitoring of two measuring points (change-over via external solenoid valves).
- Internal error documentation.
- Programmable service address.
- Programmable maintenance interval for maintenance requests.
- 500 ml indicator storage bottle for extended operating periods.
- Optional: Interface card (0/4-20 mA or 0/2-10 V), Interface RS 232 (for protocol printer).
Indicators for Testomat 2000® DUO instruments
See the official PDF for exact tabulated values.
Operating limits
- Water Pressure: 0.3 bar to 8 bar.
- Measuring Water Temperature: 10 °C to 40 °C.
- Influence of Heavy Metal Ions: Iron > 0.5 mg/l, Copper > 0.1 mg/l, Aluminium > 0.1 mg/l may influence color reaction.
- Carbonic Acid (CO₂): Concentrations > 20 mg/l may lead to incorrect evaluations.
- Reagent pH Range: 4 – 10.5 (use Heyl Testomat 2000® indicators).
Mechanical / hydraulic
- Water Inlet Connection: Standard plug connector for plastic hoses 6/4 x 1 (external diameter 6 mm/internal diameter 4 mm, wall thickness 1 mm). Maximum inlet hose length: 5 m.
- Water Outlet Connection: Opaque outlet hose (internal diameter 14 mm).
- Dimensions: Not specified in the extract.
- Weight: Not specified in the extract.
Electrical
- Mains Voltage Input: 24 V / 115 V / 230 V.
- Relay Outputs: Max. 240 VAC, 4 A.
- Optional Interfaces: 0/4-20 mA (current), 0/2-10 V (voltage), RS 232.
Disclaimer
This summary is based on an extraction from an OEM datasheet. The extraction may have missed figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.