Testomat

Ambient temperature: 10 to 40°C · Water Temperature: Water exceeding 40°C can cause burns and damage. A cooler must be installed if temperatures exceed 40°C · Measurement Water Temperature: Must be between 10 and 40°C

The Testomat EVO TH is an online analysis instrument for the automatic determination and monitoring of residual total hardness in water.

Water Pressure: 0.3 bar to 8 bar (factory setting is 1 to 8 bar). For 0.3 to 1 bar operation, a flow controller valve body must be removed · Water Temperature: 10 °C to 40 °C. A cooler is recommended for temperatures above 40 °C · Recommended maximum hose length: 5 m

The Testomat 2000 is an online analysis unit for determining and monitoring water hardness, carbonate hardness, p-value, or minus m-value. It offers menu-driven operation.

Reagent pH Range: 4 – 10.5 (use Heyl Testomat 2000® indicators) · Water Inlet Connection: Standard plug connector for plastic hoses 6/4 x 1 (external diameter 6 mm/internal diameter 4 mm, wall thickness 1 mm). Maximum inlet hose length: 5 m · Water Outlet Connection: Opaque outlet hose (internal diameter 14 mm)

The Testomat 2000 DUO is an online analysis instrument designed for automatic monitoring of water hardness, carbonate hardness, and p- or minus m-values.

Water outlet connection: Connect to an opaque outlet hose (internal diameter 14 mm). Lay the hose without backwater or syphoning effect to the drain · Freely selectable hardness units: °dH, °f, ppm CaCO₃, mmol/l

The Testomat 2000 CAL is an automated online water analysis unit for measuring parameters like total hardness and carbonate hardness.

pH range: Above 4 · Water inlet connection: Standard plug connector for plastic hoses 6/4 x 1 · Water outlet connection: Requires outlet hose with internal diameter 12 mm

The Testomat Eco is an online instrument for automatically determining and monitoring residual total hardness in water with a pH above 4.

Measuring range: 0 – 2.5 mg/l (ppm) total chlorine · Water inlet connection: Standard plug connector for plastic hoses 6/4 x 1 (external diameter 6 mm/internal diameter 4 mm, wall thickness 1 mm) · Water outlet connection: Connect to an outlet hose (internal diameter 12 mm). Lay the hose without backwater development and any syphoning effect to the drain, e.g., via an open funnel

The Testomat 2000 CLT is an online process photometer designed for monitoring total chlorine concentration in drinking water. It offers a measuring range of 0-2.

Mains voltage connection: 24 V / 115 V / 230 V AC · Water Inlet Connection: Standard plug connector for plastic hoses 6/4 x 1 · Water Outlet Connection: Connection for opaque outlet hose (internal diameter 14 mm)

The Testomat 2000 CLF is a process photometer for online monitoring of free chlorine concentration in applications like drinking water disinfection.

Total Chlorine Measuring Range: 0 - 2.5 mg/l (ppm) · pH Range: 4 - 10.5 · Hose Connections: Standard with plug connector for opaque plastic hoses 6/4 x 1. Optional adapter for quick-acting coupling available

The Testomat 2000 THCL is a combined process photometer for total chlorine and process titrator for water hardness.

Range I: 0 - 0.65 mg/l, with a resolution of 0.01 mg/l · Range II: 0.7 – 1.0 mg/l, with a resolution of 0.1 mg/l · pH Range: 4 – 10.5

The Testomat 2000 Fe is a process photometer for online monitoring of dissolved iron in water using colorimetric analysis. It operates with two measurement ranges (0-0.

Silica (SiO₂) measuring range: 0.3 - 1.2 ppm · Power supply: 24V / 115V / 230V, 50 – 60 Hz (depending on configuration) · Ambient temperature: 10 – 40 °C (50 - 104°F)

The Testomat 808 SiO2 is a silica monitoring instrument designed for hospital sterilisation applications. It operates within a silica measuring range of 0.3 to 1.

Power Supply: Depending on product configuration: 24V / 115V / 230V, 50 – 60 Hz · Water hardness: 0.02 – 3 °dH (0.4….54 ppm CaCO₃) · Instrument Protection: 230 – 240 V: T0,1 A; 115 V: T0,2 A; 24 V: T0,8 A

The Testomat 808 is a limit value monitoring device designed for water hardness analysis in applications such as reverse osmosis and pure water production.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat ECO is an automated titrator designed for cost-effective water hardness determination and quality monitoring in water treatment and drinking water...

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Water temperature: 10 to 40 °C (50 to 104°F) · Ambient temperature: 10–45 °C (50 - 104°F)

The Testomat ECO C is an automatic titrator for determining carbonate hardness and acid capacity in applications such as swimming pools and water treatment plants.

Power supply: 230 VAC, 24 VAC (all 50–60Hz) or multi voltage power supply unit 100-240 VAC / 100-353 VDC · Ambient temperature: 10–40 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat EVO TH is an automated water hardness analyzer for applications including water treatment plants, industrial boilers, and drinking water facilities.

Selection cues: measuring range · accuracy · output signal and process connection

The Testomat 2000 is an analyzer for water treatment applications.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Water hardness: 0.05–25 °dH · Carbonate hardness: 0.5–20 °dH

The Testomat 2000 CN is an online water hardness analyzer designed for the Chinese market, featuring a Mandarin menu and English language options.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 CAL is a water quality control instrument designed with an integrated calibration function to counteract interference from foreign ions.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Water hardness: 1.0–25.0 °dH · Carbonate hardness: 1.0–20.0 °dH (depending on indicator choice)

The Testomat 2000 V is an automated control system for measuring water and carbonate hardness.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Power consumption: max. 30 VA · Degree of protection: IP 65

The Testomat 2000 self clean is an analyzer designed for difficult water applications to reduce contamination and extend service life.

Selection cues: measuring range · accuracy · output signal and process connection

The Testomat 2000 Antox is an analyzer for continuous measurement of free chlorine.

Selection cues: measuring range · accuracy · output signal and process connection

PDF datasheet mirror for Testomat 2000 DUO (Testomat).

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 DUO CN is an instrument for monitoring water quality in water treatment and drinking-water plants.

Measuring range (Free chlorine): 0.00 - 0.99 mg/l and 1.0 - 2.5 mg/l · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F)

The Testomat 2000 CLF is an online process photometer designed for monitoring free chlorine in drinking water, swimming pools, and other applications.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Testomat 2000 CLT is a wet-chemical online instrument designed for monitoring total and free chlorine in drinking water, swimming pool water, and other applications.

Measuring range (Total chlorine): 0.00 - 0.99 mg/l and 1.0 - 2.5 mg/l · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F)

The Testomat 2000 CLT self-clean is a process photometer designed for disinfectant monitoring in drinking and process water, featuring an integrated detergent dosing pump.

Measurement range: 0–4.7 mg/l (ppm) · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Ambient temperature: 10–45 °C (50 - 104°F)

The Testomat 2000 CLO2 is an online instrument for monitoring chlorine dioxide content in drinking and process water. It features a measurement range of 0 to 4.7 mg/l.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Power consumption: max. 30 VA · Degree of protection: IP 65

The Testomat 2000 THCL is a process photometer designed for the combined measurement of total chlorine and water hardness in applications such as medical technology and...

Measurement Range: 0–5.6 mg/l (ppm) bromine (Br₂) · Power Supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Ambient Temperature: 10–45 °C (50 - 104°F)

The Testomat 2000 Br is a wet-chemical online instrument for monitoring disinfectant dosing. It operates with a bromine measurement range of 0–5.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60 Hz) · Power consumption: max. 30 VA · Degree of protection: IP 65

The Testomat 2000 CrVl is an online wet-chemical monitor for chromate and hexavalent chromium using photometric analysis.

Measuring range: 0.00 - 0.65 mg/l and 0.7 - 1.0 mg/l iron-II and iron-III · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F)

The Testomat 2000 Fe is a wet-chemical online monitor designed for iron content analysis in industrial or drinking water systems.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (50–60 Hz) · Power consumption: max. 30 VA · Degree of protection: IP 65

The Testomat 2000 Polymer is a process photometer and wet-chemical online monitor designed for polyacrylate content in cooling and heating circuits.

Measuring range: 0.0-10.0 mg/l · Accuracy: < 10% at end of measuring range · Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz)

The Testomat 2000 PO4 is an online process photometer designed for monitoring phosphate content in applications such as process water, production water, and wastewater.

Ambient temperature: 10–45 °C · Operating pressure: 1 to 8 bar (15 to 116 psi) or 0.3 to 1 bar (5 to 15 psi), after removing of the valve body out of the regulator/filter housing · Water temperature: 10 to 40 °C

The Testomat 2000 SO3 is an online, wet-chemical instrument for monitoring sulfite content in boiler feed water.

Power supply: 230–240 VAC, 115 VAC, 24 VAC all 50–60Hz · Power consumption: max. 30 VA · Degree of protection: IP 65

The Titromat KH is an automatic analyzer designed for measuring and monitoring carbonate hardness in high hardness ranges.

Power supply: 230–240 VAC, 115 VAC, or 24 VAC, all 50–60 Hz · Power consumption: Max. 30 VA · Degree of protection: IP 65

The Titromat M1 is an instrument for automatically determining and monitoring carbonate hardness in low hardness ranges.

Ambient temperature: 10–45 °C · Water temperature: 10 to 40 °C · Supply voltage: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz)

The Titromat M2 is an instrument for automatic determination and monitoring of carbonate hardness in low hardness measuring ranges.

Power supply: 230–240 VAC, 115 VAC, 24 VAC (all 50–60Hz) · Ambient temperature: 10–45 °C (50 - 104°F) · Water temperature: 10 to 40 °C (50 to 104°F)

The Titromat TH automatically determines and monitors carbonate hardness for high ranges in applications like drinking water production and raw water monitoring.

Selection cues: measuring range · accuracy · output signal and process connection

This is a maintenance and service set for Testomat ECO devices. It includes various gaskets, O-rings, fuses, and a cleaning brush set for regular upkeep.

Inlet pressure 2 bar: 200 ml measuring water adjustment + 18.1 ml analysis volume = 218.1 ml per analysis

This document provides maintenance instructions for the Testomat 2000 and Testomat ECO water analysis instruments. It details cleaning procedures, troubleshooting steps.

Selection cues: measuring range · accuracy · output signal and process connection

This document provides detailed maintenance and service instructions for the Testomat® 808 water quality monitoring instrument.

Twist Protection: Ensure correct alignment of pump heads on the motor shaft using the twist protection features

This document provides maintenance and service instructions for the Testomat 808 SiO2 instrument. Regular maintenance.

Selection cues: measuring range · accuracy · output signal and process connection

These are spare parts kits and individual components designed for the maintenance of Testomat 2000 and Testomat 808 series online water analysis instruments.