العودة إلى Testomat: hardness controller
Testomat logo

ملخص ورقة البيانات

Testomat

Engineering summary from PDF text extraction for Testomat. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product name: Testomat 808 SiO₂
  • Application: Sterilization of hospitals, silica monitoring
  • Compliance: EN 285:2006

Operating limits

  • Ambient temperature: 10 – 40 °C (50 - 104°F)
  • Water temperature: 10 to 40 °C (50 to 104°F)

Feed water

  • Operating pressure:
    • 0.3 – 1 bar (0.3 x 10⁵ to 1 x 10⁵ Pa)
    • 1 - 4 bar (1 x 10⁵ to 4 x 10⁵ Pa)
    • A pressure reducer (special accessory) should be used from 4 to 8 bar range.
  • Water inlet: Opaque hose with 6 mm external diameter / 4 mm internal diameter
  • Water outlet: Hose with 6 mm external diameter / 4 mm internal diameter

Product water

  • Measuring range (Silica SiO₂): 0.3 - 1.2 ppm
  • Limits: 10 limits available in the range of 0.3 to 1.2 ppm

Electrical

  • Power supply: Depending on product configuration: 24V / 115V / 230V, 50 – 60 Hz
  • Instrument protection:
    • 230 – 240 V: T0.1 A
    • 115 V: T0.2 A
    • 24 V: T0.8 A
  • Mains protection for consumers: max. 4 A (N, L)
  • Power consumption: max. 16 VA (without external load)
  • Protection class: I
  • Degree of protection: IP 54
  • Conformity: EN 61000-6-2, EN 61000-6-4, EN 61010-1
  • Current interface: Output of defined values (5, 8, 11, 14, 17, 20 mA) for displaying status and error messages, max. load 500 Ohms
  • Contact load relay: 230V / 4A AC ohm resistive load

Mechanical / hydraulic

  • Dimensions:
    • 364 mm (W) x 314 mm (H) x 138 mm (T)
    • With side pocket: 442 mm (W) x 314 mm (H) x 138 mm (T)
  • Weight: 4350 g

Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.