العودة إلى Testomat
Testomat logo

ملخص ورقة البيانات

Testomat

Engineering summary from PDF text extraction for Testomat. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product: Testomat 808 SiO2
  • Application: Sterilisation of hospitals, silica monitoring

Operating limits

  • Silica (SiO₂) measuring range: 0.3 - 1.2 ppm
  • Ambient temperature: 10 – 40 °C (50 - 104°F)
  • Water temperature: 10 to 40 °C (50 to 104°F)

Feed water

  • Operating pressure:
    • 0.3 – 1 bar (0.3 x 10⁵ to 1 x 10⁵ Pa)
    • 1 - 4 bar (1 x 10⁵ to 4 x 10⁵ Pa)
    • (Note: A pressure reducer is recommended from 4 to 8 bar)
  • Water inlet hose: 6 mm external diameter / 4 mm internal diameter
  • Water outlet hose: 6 mm external diameter / 4 mm internal diameter

Electrical

  • Power supply: 24V / 115V / 230V, 50 – 60 Hz (depending on configuration)
  • Instrument protection: T0,1 A (230-240V); T0,2 A (115V); T0,8 A (24V)
  • Mains protection for consumers: max. 4 A (N, L)
  • Power consumption: max. 16 VA (without external load)
  • Protection class: I
  • Current interface: Output of defined values (5, 8, 11, 14, 17, 20 mA); max. load 500 Ohms
  • Contact load relay: 230V / 4A AC ohm resistive load

Mechanical / hydraulic

  • Dimensions (W x H x D): 364 x 314 x 138 mm
  • Dimensions with side pocket: 442 x 314 x 138 mm
  • Weight: 4350 g
  • Degree of protection: IP 54

Conformity

  • EN 285:2006
  • EN 61000-6-2
  • EN 61000-6-4
  • EN 61010-1

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.