Quay lại Mô-đun UF
IMT logo

Hồ sơ thương hiệu quốc tế

IMT Ultrafiltration

IMT is represented here as an ultrafiltration membrane module supplier for water and wastewater treatment.

Giới thiệu thương hiệu và danh mục sản phẩm

IMT is represented here as an ultrafiltration membrane module supplier for water and wastewater treatment.Its records are relevant where hollow-fiber module format, membrane material, operating flux, cleaning method, skid layout, and replacement compatibility are the key selection questions.

IMT Ultrafiltration's position in ultrafiltration modules is defined by product families such as hollow-fiber, capillary, submerged, pressurized, and MBR-related UF membrane modules.

The portfolio is best understood inside pretreatment, reuse, drinking water clarification, MBR solids separation, turbidity control, and pathogen barrier service, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include IMT 125 UF-MB-TAP, IMT 225 UF-MB-TAP and IMT 250 UF-MB-TAP.Selection should focus on membrane material, pore size or MWCO, flux, cleaning method, module format, and skid layout.

13

Mẫu và dòng sản phẩm

1

Dòng sản phẩm

Danh mục mẫu

Tra cứu mẫu nhanh

13 mẫu và dòng sản phẩm

Tìm thông số và so sánh với sản phẩm của thương hiệu khác trong cùng danh mục.

Sản phẩm và tài liệu
Lọc theo khoảng giá trị

Lọc theo đơn vị hiển thị. Thông số thiếu, khoảng giá trị và điều kiện thử không được dùng làm giá trị đơn để lọc.

Hiển thị 13 trên 13 mẫu

So sánh 2–4 mẫu tương thích giữa các thương hiệu. Danh sách được lưu trên thiết bị này.

Tư vấn các mẫu đã chọn

IMT 125 UF-MB-TAP

General Products

Distance permeate connector-feed connector: 121 mm (5 inch) +/- 2.0 · Distance permeate connector-element center: 46 mm (101 inch) +/- 2.0 · Permeate connection male OD: 1/2"

IMT 125 UF-MB-TAP là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 225 UF-MB-TAP

General Products

Distance permeate connector-feed connector: 142 mm (6 inch) ± 2.0 · Distance permeate connector-feed connector (without screw ends): 118 mm (5 inch) ± 2.0 · Distance permeate connector-element center: 55 mm (121 inch) ± 2.0

IMT 225 UF-MB-TAP là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 250 UF-MB-TAP

General Products

Distance Permeate Connector-Feed Connector (without screw ends): 118 mm +/- 2.0 (5 inch) · Distance Permeate Connector-Feed Connector: 147 mm +/- 2.0 (6 inch) · Distance Permeate Connector-Element Center: 55 mm +/- 2.0 (121 inch)

IMT 250 UF-MB-TAP là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 350 UF-MB-TAP

General Products

Distance permeate connector-feed connector: 224 mm (9 inch) +/- 1.0 · Distance permeate connector-element center: 73 mm (161 inch) +/- 2.0 · Permeate connection male OD: 1"

IMT 350 UF-MB-TAP là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 475 UF-MB-TAP

General Products

Distance permeate connector-element center: 90 mm (4 inch) +/- 2.0 · Permeate connection male OD: 1" · Permeate flow at 100 l/m² h: 425 l/h (2 gpm)

IMT 475 UF-MB-TAP là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 4100 UF-MB-TAP

General Products

Distance Permeate Connector-Element Center: 90 mm +/- 2.0 (4 inch) · Permeate Connection Male OD: 1" · Permeate Flow at 100 l/m²h: 580 l/h (3 gpm)

IMT 4100 UF-MB-TAP là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 4150 UF-MB-TAP

General Products

Distance Permeate Connector-Feed Connector: 265 mm (10 inch) ± 2.0 · Distance Permeate Connector-Element Center: 90 mm (4 inch) ± 2.0 · Permeate Connection Male OD: 1"

IMT 4150 UF-MB-TAP là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 6100 UF-MB-TAP

General Products

Distance Permeate Connector-Feed Connector: 290 mm (± 2.0) / 10 inch · Distance Permeate Connector-Feed Connector (without screw ends): 256 mm (± 2.0) / 9 inch · Distance Permeate Connector-Element Center: 111 mm (± 2.0) / 0 inch

IMT 6100 UF-MB-TAP là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 8060 UF-MB-RX

General Products

Permeate connection ID: 42,6 mm +/- 0,5 (2 inch) · Permeate flow at 100 l/m² h: 4 m³ (18 gpm) · Area: 40 m² (431 ft²)

IMT 8060 UF-MB-RX là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 10060 MF-SB-0.2

General Products

Độ lọc / kích thước lỗ: 0.2 µm · Distance feed-permeate connector: 191 +/- 1,0 mm (8 inch) · Permeate connection OD: 2" victaulic

IMT 10060 MF-SB-0.2 là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 10060 UF-MB-G

General Products

Distance feed-permeate connector: 191 +/- 1.0 mm (8 inch) · Permeate connection OD: 2" victaulic · Permeate flow at 100 l/m² h: 6 m³ (26 gpm)

IMT 10060 UF-MB-G là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 10060 UF-MB

General Products

Distance feed-permeate connector: 191 +/- 1,0 mm (8 inch) · Permeate connection OD: 2" victaulic · Permeate flow at 100 l/m² h: 5 m³ (22 gpm)

IMT 10060 UF-MB là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

IMT 10060 UF-SB-2.2

General Products

Distance feed-permeate connector: 191 +/- 1.0 mm (8 inch) · Permeate connection OD: 2" victaulic · Permeate flow at 100 l/m² h: 2.8 m³ (12 gpm)

IMT 10060 UF-SB-2.2 là mô-đun siêu lọc dùng cho tiền xử lý, làm trong và lọc tạo hàng rào trong hệ thống xử lý nước.

Dòng sản phẩm và hướng dẫn lựa chọn

Dòng sản phẩm và hướng dẫn lựa chọn

Cách chọn Mô-đun UF của IMT

Phần này giải thích các dòng sản phẩm chính của IMT và những thông số cần so sánh trước khi chọn mẫu cụ thể.

Bước 1: Chọn dòng sản phẩm theo ứng dụng

Các dòng chính trên trang gồm General Products. Chọn dòng phù hợp với mục tiêu xử lý, dạng thiết bị và điều kiện vận hành, sau đó dùng danh mục mẫu bên dưới để so sánh thông số.

Bước 2: Xác nhận mẫu bằng thông số chính

Sau khi chọn dòng sản phẩm, so sánh module format, flux target, backwash strategy, chemical tolerance. Với dự án thay thế, kiểm tra điều kiện lắp đặt hoặc nạp vật liệu, kiểu kết nối và độ tương thích với hệ thống hiện hữu. Với dự án mới, xem xét phương thức vận hành, bảo trì và nguồn phụ tùng hoặc vật tư tiêu hao.

Tổng quan dòng sản phẩm

Trang này có 1 dòng sản phẩm.

General Products

13 models trong dòng này. Representative models: IMT 125 UF-MB-TAP, IMT 225 UF-MB-TAP, IMT 250 UF-MB-TAP.

Giới thiệu sản phẩm và tài liệu

Sản phẩm và tài liệu kỹ thuật thương hiệu

13 mẫu và dòng sản phẩm

Xem ứng dụng, bảng dữ liệu và hướng dẫn dòng sản phẩm.

General Products

13 hồ sơ sản phẩm

Xem các hồ sơ General Products còn lại (7)
IMT Ultrafiltration Mô-đun UF | Mẫu sản phẩm và bảng dữ liệu | AquaChain