BMT Ozone Measurement

Absolute pressure range: 1.15 bar (optional 1.5 to 4.0 bar in steps of 0.5 bar) · Accuracy: After zeroing, the maximum error is the sum of 0.4% of measurement + 0.1% of scale · Ambient Temperature: 0 - 50°C (non-condensing)

The BMT 964 is a dual beam UV photometer designed for monitoring ozone concentration in various water treatment and industrial applications.

Ranges selectable: 2 to 600 g/Nm³ · Wide range input: 100 - 240 VAC, 15 VA · Via wall mount power supply: 24 VDC

The BMT 964 BT is a portable, benchtop ozone gas analyzer utilizing a dual-beam UV photometer for accurate measurements.

Concentration Ranges: Selectable: 50, 100, 200, 300, 400, 500, 600 g/Nm³. Optional: 10, 20 g/Nm³ · High accuracy: error less than 0.5% · Accuracy: Max. error after zeroing is the sum of 0.4% of measurement + 0.1% of scale

The BMT 964 C is a wall-mount ozone analyzer housed in an IP 65 aluminum cabinet for hostile environments, featuring a dual-beam UV photometer with automatic operation.

Wide range input: 100 - 240 VAC · High accuracy: error < 0.5% · Outputs: 4-20 mA and 0-10 V isolated

This is a UV-photometric ozone analyzer system for moist off-gas that includes a gas dryer and pump. It features off-gas drying at the sample point.

Concentration ranges: 10 to 150 g/m³ (ppmw) · Wide range input: 100 - 240 VAC, 15 VA · High accuracy: error less than 0.5%

The BMT 964 AQ is a dual-beam UV photometer designed for accurate ozone-in-water monitoring.

Isolated signal outputs: 4-20mA and 0-10V · Max. Inlet Pressure: 10 bar · Ambient Temperature: 0 - 50°C (non-condensing)

The BMT 964 AQ-LC is a dual-beam UV photometer designed for measuring low concentrations of ozone in clear and clean water systems.

Connection cable length: 2 m or 5 m (max. cable length is 100 m) · Front panel dimensions: 144 x 72 mm

This is a remote display unit designed for BMT 964 S/RD and BMT 964 AQ/RD ozone analyzers, allowing separation of the sensor and display up to 100 meters.

Available ranges: 1 to 250 ppmv · Resolution: 0.001 ppmv · Sample gas flow: 1 l/min, automatically controlled via an electronic flow meter

The BMT 932 is an ambient ozone monitor using a dual-beam UV photometer for low concentration measurements. It features a 3-year warranty.

Input power supply range: 100 - 240 VAC, 50/60 Hz · Power supply: 24 VDC, 300 mA supplied by a wall-mount adapter · Dimensions: Approximately 17 x 11 x 3.3 cm

The BMT AOS 1 is an ambient ozone simulator designed for comparative testing of two ozone monitors.

Adjustment Range: Approx. 40 ppbv to > 1000 ppbv (via 10-turn potentiometer) · Power Supply: Wall mount adapter 100-240 VAC (included, with exchangeable connectors for Europe, UK, USA, and Japan) · Ozone Output: 40 - 1000 ppbv in air

The BMT Ozone Measurement Ambient Ozone Simulator AOS 2 is designed for comparing ambient ozone monitors or electrochemical sensors against a reference monitor.

Control range 1: 30 (3 to 100% ozone output) · Adjustment range: 3 to 100% ozone output at 0 to 100% potentiometer setting · Maximum pressure: 2.5 barg

The BMT 801 BT is a benchtop ozone generator designed for laboratory applications, producing ozone from oxygen. It features an integrated flow meter and throttle valve.

Control range: 1:7 · Adjustment Range: 15 to 100% ozone output (at 0 to 100% control input) · Operating Pressure: Not to exceed 1 bar gauge (1.5 to 2.0 bar absolute)

This BMT 802 N is an air-cooled, high-concentration ozone generator designed for laboratory and pilot plant applications. It features a compact aluminum enclosure.

Adjustment Range: 15 to 100% ozone output at 0 to 100% control input · External Analyzer Connection: Two in-line ports for optional BMT 964 ozone analyzer · Oxygen Flow Rate: 0.1 to 4 Nl/min

The BMT 803 BT is a benchtop, air-cooled ozone generator designed for laboratory applications using an oxygen feed gas.