
Tóm tắt tài liệu kỹ thuật
Ambient Ozone Simulator AOS 2
Engineering summary from PDF text extraction for Ambient Ozone Simulator AOS 2. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: AMBIENT OZONE SIMULATOR AOS 2
- Manufacturer: BMT MESSTECHNIK GMBH
- Purpose: For comparing two Ambient Ozone Monitors or comparing electro-chemical sensors with a reference monitor.
Operating limits
- Ozone Output: 40 - 1000 ppbv in air
- Ozone Concentration (max): > 1 ppmv
- Adjustment Range: Approx. 40 ppbv to > 1000 ppbv (via 10-turn potentiometer)
- UV Lamp Life Expectancy: > 5 years at continuous operation
- Operating Temperature: 10 to 40°C
Feed gas
- Source: Ambient air through particle filter
- Particle Filter: Replaceable insert, glass fiber felt
- Inlet Flow Rate: 3 l/min (inlet)
- Outlet Flow: Sum of outlet flow rates must be smaller than inlet flow rate.
Product water
- Gas Outlet Ports: For 4x6 mm or 5/32" x 1/4" FEP (PTFE) tubing.
- Ozone Destruct: For overflow of ozonated air.
- Ozone Blower Function: Possible by closing the overflow outlet.
Electrical
- Power Input: 12 VDC, 450mA
- Power Supply: Wall mount adapter 100-240 VAC (included, with exchangeable connectors for Europe, UK, USA, and Japan)
- UV Lamp Control: Starts automatically when power is connected and fine adjustment is at approx. 10% or higher. Manual start with "START" button is possible at lower settings.
Mechanical / hydraulic
- Dimensions (WxHxD): 220 x 108 x 42 mm
- Weight: 900 g
- Features: Built-in pump, UV lamp monitoring window, two independent ozone ports.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.