Back to Water glossary

Water glossary

Flue Gas Desulfurization (FGD) Equipment Overview

Explore the critical components of Flue Gas Desulfurization (FGD) systems, from boilers to dewatering, ensuring efficient pollutant removal and by-product management.

Flue Gas Desulfurization (FGD) Equipment: A Technical Guide

Flue Gas Desulfurization (FGD) systems are integral to modern industrial operations, particularly in power generation, to mitigate air pollution by removing sulfur oxides (SOx) from exhaust gases. This guide details the primary equipment components that constitute an effective FGD process.

Key Components of an FGD System

A typical FGD system comprises several interconnected units, each performing a vital function in the desulfurization process.

The Boiler

The boiler serves as the primary combustion chamber where fuels, such as coal or biomass, are burned to generate heat. The resulting combustion produces hot flue gas containing various pollutants, including sulfur dioxide (SO2) and particulate matter.

  • Ash Generation: Combustion of fossil fuels typically generates ash.
    • Fly Ash: A 70-80% fly-ash fraction may illustrate some boiler duties; the actual split depends on fuel and furnace design. Fly ash is fine particulate matter carried by the flue gas.
    • Bottom Ash: A smaller fraction remains as heavier bottom ash, which settles at the base of the furnace and can be removed via a hopper.
  • Operational Considerations: Match furnace temperature and ash characteristics to boiler design. Dry-bottom boilers retain ash in a non-molten state, whereas slag-tap or cyclone designs intentionally handle molten slag; raising temperature above ash fusion is not a general way to prevent slagging.

Electrostatic Precipitator (ESP)

The Electrostatic Precipitator (ESP) is a highly efficient device designed for the removal of fine particulate matter, especially fly ash, from the flue gas stream. It operates by electrically charging the particles and then collecting them on oppositely charged plates.

  • Fly Ash Removal: ESPs are widely employed for fly ash removal in FGD systems due to their high efficiency in capturing even very small particles.
  • Energy Efficiency: When integrated into wet scrubber systems and positioned before the SO2 absorber, ESPs primarily focus on particle collection. Evaluate pressure loss, electrical demand, gas loading, and absorber performance for the actual arrangement rather than assuming a universal energy advantage.

Spray Tower (SO2 Absorber)

The spray tower, often referred to as the SO2 absorber, is the core component responsible for capturing sulfur oxides from the flue gas. This is where the actual desulfurization reaction takes place.

  • Mechanism: Flue gas enters the tower and comes into contact with an atomized alkali sorbent spray (e.g., limestone slurry).
  • Chemical Reaction: The sulfur dioxide (SO2) in the flue gas reacts with the alkali sorbent.
    • Initially, sulfite is formed.
    • Further oxidation leads to the formation of sulfate, which can then precipitate as gypsum (calcium sulfate dihydrate).
  • Efficiency Driver: The design and operation of the spray tower, particularly the contact efficiency between the flue gas and the sorbent, are critical factors determining the overall efficiency of the flue gas desulfurization process.

Clarifier

Following the SO2 absorption stage, the clarifier plays a crucial role in separating the solid reaction by-products (e.g., gypsum, unreacted sorbent, and collected ash fines) from the liquid slurry.

  • Function: This unit uses gravity to settle solids, resulting in a clarified liquid overflow and a concentrated sludge underflow.
  • Sludge Collection: The clarifier efficiently collects the generated sludge, preparing it for subsequent dewatering.

Dewatering System

The dewatering system processes the sludge from the clarifier to reduce its moisture content. This step is essential for both disposal and potential commercial utilization of the by-product.

  • Sludge Treatment: Common dewatering technologies include vacuum filters, centrifuges, or filter presses.
  • By-product Management: The dewatered sludge can be:
    • Disposed of in landfills, reducing volume and transportation costs.
    • Used commercially as gypsum for materials such as wallboard only when oxidation, purity, moisture, chloride and trace-contaminant requirements are met; wastewater clarifier sludge is not automatically saleable gypsum.

AquaChain Engineering Tip

When operating FGD spray towers, regularly inspect and clean spray nozzles to prevent clogging and ensure uniform sorbent distribution. Clogged nozzles lead to poor gas-liquid contact, significantly reducing SO2 absorption efficiency and increasing sorbent consumption.

Frequently Asked Questions

Q1: What is the primary purpose of Flue Gas Desulfurization (FGD)?

A1: The primary purpose of FGD is to remove sulfur dioxide (SO2) and other sulfur compounds from exhaust gases produced by fossil fuel combustion, thereby reducing air pollution and acid rain.

Q2: How does an Electrostatic Precipitator (ESP) contribute to FGD systems?

A2: An ESP efficiently removes fine particulate matter, primarily fly ash, from the flue gas before it enters the SO2 absorber, preventing fouling and ensuring cleaner operation of downstream equipment.

Q3: What is the main by-product of wet FGD systems and how is it used?

A3: The main by-product of wet FGD systems is often gypsum (calcium sulfate dihydrate). It can be dewatered for construction use, including wallboard and plaster, when it meets the buyer and applicable environmental specifications; not every wet-scrubber sludge qualifies.

Explore more about water filtration technologies Reference: EPA steam-electric technical document: dry-bottom and slagging furnaces.