Back to Water glossary

Water glossary

Advanced Filtration Techniques in Water Treatment

Explore modern filtration methods, from traditional bag filters to high-speed centrifuges and filter presses, for efficient solids-liquid separation in process and boiler feed water applications.

Understanding Filtration

Filtration is a fundamental process in water treatment and chemical technology, designed to separate suspended solid matter from a liquid by passing the latter through a porous substance known as a filter. The liquid that successfully passes through the filter is termed the filtrate, while the retained solids form a cake or residue. Filter media can vary widely, including specialized fabrics, synthetic felts, membranes, sand, or other engineered porous materials, each selected based on the specific application and characteristics of the fluid and solids.

Fundamentals of Filtration

Filtration includes sieving, interception and retention within depth media or the filter cake, so removal is not determined by pore size alone. Industrial feeds range from coarse solids to fine colloids; select media by validated retention, clarity and pressure-drop performance, not only a nominal pore label.

Challenges in Filtration

Effective filtration can be hindered by several factors:

  • Fine, Slimy Precipitates: These can quickly blind filter media, drastically reducing flow rates.
  • Crystal Formation: In hot solutions, crystals can form within the interstices of the filter cloth, leading to clogging.
  • Impervious Layer Formation: Certain precipitates can consolidate on the filter surface, creating an impermeable layer that halts filtration.
  • Turbidity: Aggressive attempts to hasten filtration, such as scraping or stirring the precipitate, often disrupt the filter cake and cause the filtrate to become turbid.

Bag Filters: A Traditional Approach

Bag filters are a common solids-liquid separation option. Modern units use compatible woven/felted media, a support basket and an appropriately pressure- and temperature-rated housing; loose fabric or outer netting alone is not a pressure vessel.

  • Example Dimensions: One common size 02 bag format is approximately 180 mm in diameter and 810 mm long (7 in × 32 in). Dimensions and seal compatibility must match the selected housing; these are not universal bag dimensions.
  • Operation: Secure the bag collar and seal in its designed support basket/housing to prevent bypass. Feed enters the bag and solids are retained while filtrate passes through. Isolate, depressurize and drain safely before opening the housing or replacing media.
  • Temperature Control: Select media, seals and housings compatible with the actual temperature. Approved insulation, tracing or jacketed equipment can limit cooling/crystallization or viscosity change; a steam-heated room is not a universal requirement.

Pressure Filtration Systems

Pressure filtration enhances the separation process by forcing the liquid through the filter medium using an applied pressure differential. This pressure can be generated in several ways:

  • Suction Filtration: Air is exhausted from a receiver below the filter, creating a vacuum that draws the liquid downwards. Precipitate collects on top, forming a filter layer. While effective, this can lead to blinding if particles form an impervious layer.
  • Upward Suction Filtration: The filter is suspended in the liquid, and filtrate is drawn upwards. This method can reduce clogging as a significant portion of the precipitate settles to the bottom of the vessel before contacting the filter.
  • Hydrostatic Pressure: A high column of liquid or a force pump generates the necessary pressure. This is particularly common in large-scale industrial applications.

Filter Presses: Plate-and-Frame Design

The filter press is a robust and widely used device for pressure filtration in industrial settings. It consists of a strong frame supporting a series of filter cells.

  • Cell Construction: Plate-and-frame cells use filter plates separated by frames; recessed-chamber and membrane presses use other chamber arrangements. Suitable plates may be polymeric or metallic, depending on chemical, temperature and pressure requirements.
  • Filter Media: Two pieces of filter cloth, slightly larger than the plates, are sewn together around a central opening. One piece is passed through a hole in the plate, and both are spread smoothly on either side.
  • Assembly: Plates and frames are aligned and closed by the specified mechanical or hydraulic clamping system. Cloths, ports and feed/filtrate paths must match the plate design; improper alignment or obstructed feeds can damage plates.
  • Operation (Central Feed): A powerful force pump drives the liquid into the central channel, filling the cells. Hydrostatic pressure forces the liquid through the filter cloths into grooves on the plates, from which it escapes through openings at the lower edge. The retained sediment forms a solid cake within each cell.
  • Operation (Corner Feed): In an alternative design, holes in the corners of plates and distance frames form a continuous channel. Small holes in the distance frames admit liquid into each cell. The filter cloth covers the distance frame, with corresponding holes for the corner channels.
  • Pressure Range: Use the equipment and plate-specific filtration pressure, closure force and temperature rating; the lowest-rated component governs. Do not infer safe operating pressure from a generic broad range.
  • Capacity: Plate count and chamber volume vary widely. A nominal plate size of 1.2 m (4 ft) is one example, not a universal chamber diameter; select batch capacity from actual chamber count, cake thickness and solids loading.
  • Temperature Control: For specific applications, presses can be jacketed or coiled to allow circulation of steam or refrigerating solutions for hot or cold filtration.
  • Corrosion Resistance: Select chemically compatible polymer plates, suitable alloys or approved linings for the liquid and service conditions. Lead coatings must not be assumed an appropriate standard material for water-contact equipment.

Centrifugal Separation: High-Speed Solids-Liquid Separation

Centrifuges can complement or replace other dewatering equipment for selected feeds; no single type universally replaces filter presses. The descriptions below concern filtering basket centrifuges. Solid-bowl decanters instead separate by sedimentation and can operate continuously.

  • Mechanism: A cylindrical basket, made of wire gauze or perforated sheet metal, rotates at very high speeds on a vertical shaft. Centrifugal force drives the contents to the outer wall.
  • Separation: Solid matter is retained by the gauze or screen, while the liquid passes through and is collected in a fixed outer shell.
  • Sizes: Machines vary significantly in size, from 300 to 1500 mm (12 to 60 inches) in diameter and 200 to 900 mm (8 to 36 inches) in basket depth.
  • Types:
    • Over-driven type: The driving pulley is at the upper end of the shaft, above the basket. Often features flexible bearings to allow the basket to adjust to unequal loading, minimizing vibration.
    • Under-driven type: The basket is at the upper end of the shaft, with the pulley below.
  • Advantages: Can provide rapid separation and useful dewatering, but final moisture depends on particle properties, centrifugal force, residence time and machine design. Neither the fastest separation nor almost-dry solids is guaranteed for every feed.

Large-Scale Sand Filtration

Sand filters are employed for large-scale water treatment applications, often for pre-treatment or clarification.

  • Construction: Modern sand filters use specified graded media, appropriate support layers where required and an engineered underdrain/distribution system. Gravity beds and pressure vessels differ; cloth covers or wooden gratings are not universal construction requirements.
  • Operation: Water flows through the layers, with solids being trapped in the sand bed.
  • Pressure Operation: Pressure sand filters require a rated vessel, correctly designed underdrains and controlled filtration/backwash. Higher pressure does not automatically provide finer filtration; monitor head loss and filtrate quality within design limits.

AquaChain Engineering Tip

Condition the slurry based on laboratory or pilot filtration tests. Suitable flocculants or filter aids can improve filtration and cake dryness, but excessive or incompatible dosing may impair permeability or product quality. Optimize dose, cake thickness and cycle using measured performance, and follow the equipment operating limits.


Frequently Asked Questions

Q1: What is the primary purpose of filtration in water treatment? A1: The primary purpose is to remove suspended solid particles from a liquid, producing a clarified liquid (filtrate) and a concentrated solid residue (filter cake), essential for process water quality, boiler feed water protection, and effluent treatment.

Q2: How do filter presses differ from centrifugal separators in their application? A2: Filter presses commonly dewater slurry in batches into compact cake. Centrifuges may be batch or continuous depending on design: filtering baskets are useful for suitable crystalline solids, while solid-bowl decanters continuously separate many slurries. Compare measured clarity, solids recovery, moisture, energy and feed suitability rather than assuming one universally faster/drier option.

Q3: What factors influence the choice of filter media for a specific application? A3: Key factors include the particle size and characteristics of the solids, the chemical compatibility of the liquid, operating temperature and pressure, desired filtrate clarity, required filtration rate, and the cost and lifespan of the media.