Back to Water glossary

Water glossary

Chloramines in Water Treatment: Properties, Production, Applications, and Removal

Explore chloramines as water disinfectants: their properties, formation, primary applications in drinking water and cooling systems, removal methods, and regulatory aspects. Understand their benefits and drawbacks for effective water treatment.

Chloramines have emerged as a vital alternative to traditional chlorine disinfection in water treatment, offering distinct advantages, particularly in secondary disinfection and taste/odor control. This guide delves into the fundamental aspects of chloramines, from their chemical properties and production to their diverse applications and removal strategies.

Introduction to Chloramines

Chloramines are chemical compounds formed by the reaction between chlorine (Cl₂) and ammonia (NH₃). Historically, their application initially focused on improving the taste and odor of drinking water. Over time, their efficacy as disinfectants, especially for maintaining disinfectant residuals in distribution systems, became widely recognized.

Inorganic chloramines are primarily formed when dissolved chlorine and ammonia react in water. This reaction can produce three distinct inorganic chloramines:

  • Monochloramine (NH₂Cl)
  • Dichloramine (NHCl₂)
  • Trichloramine (NCl₃)

These species interconvert according to water chemistry. Monochloramine can persist longer than free chlorine under selected conditions, but there is no universal half-life range applying equally to all chloramines. Organic chloramines can contribute to measured combined chlorine while offering poor disinfection.

Production of Chloramines

Chloramines are typically produced by adding ammonia to water that already contains free chlorine (hypochlorous acid (HOCl) or hypochlorite ion (OCl⁻), depending on the pH).

An example formation pH is 8.4, but it is not a universal optimum; control pH, temperature, mixing and the chlorine/ammonia ratio. The fundamental monochloramine reaction is:

NH₃ (aq) + HOCl → NH₂Cl + H₂O

The pH examples below describe tendencies, not exclusive species boundaries; chlorine-to-ammonia ratio and reaction conditions also matter:

  • Monochloramine (NH₂Cl): Often predominant at pH 7 or higher with a controlled chlorine-to-ammonia-nitrogen ratio.
  • Dichloramine (NHCl₂): More favored at lower pH, illustrated here as pH 4-7, and with greater chlorination.
  • Trichloramine (NCl₃): Favored by sufficiently acidic conditions and higher chlorine exposure; pH 3 or below is an illustration, not the only formation route.

Chlorine-to-ammonia ratios require an explicit basis. For monochloramine control, examples near 3.5-5:1 mean chlorine as Cl₂ to ammonia-nitrogen by mass, not chlorine to NH₃ molecular mass. Increasing chlorine relative to ammonia can favor further chlorination; excess ammonia can instead promote nitrification.

Organic chloramines, which are difficult to distinguish using standard analytical methods, can also form if significant organic nitrogen is present in the water.

Properties of Chloramine Species

Chemical FormulaNameApproximate Molecular Weight (g/mol)Illustrative pH TendencyTreatment Role
NH₂ClMonochloramine51.48> 7, ratio-controlledCommon secondary disinfectant; target-specific efficacy
NHCl₂Dichloramine85.924 - 7, condition-dependentOften undesirable taste/odor; not a general preferred disinfectant
NCl₃Trichloramine120.371 - 3, condition-dependentVolatile irritant; avoid uncontrolled formation
RNHClOrganic ChloramineVariesUnknownPoor

Applications of Chloramines

Chloramines serve as disinfectants, oxidizers, and bleaching agents. Their primary application in water treatment is disinfection, particularly where a prolonged disinfectant residual is required.

Drinking Water Disinfection

Chloramines are used mainly for secondary disinfection. Adequate primary free-chlorine contact can be provided before ammonia addition; forming chloramines sooner does not by itself reduce the required CT (disinfectant concentration × contact time) for primary inactivation.

Monochloramine usually disinfects more slowly than free chlorine. It can affect microbial proteins and cellular functions; amino acids are constituents of proteins, not bacterial DNA. Verify target-specific exposure rather than assuming universal efficacy at pH 7 or above.

Key advantages in drinking water disinfection include:

  • Reduced Disinfection Byproducts (DBPs): Chloramination can reduce trihalomethanes (THMs) and selected chlorine-derived DBPs, but can form other byproducts, including nitrogenous compounds.
  • Extended Residual: Monochloramine can persist in distribution; verify actual residuals, water age and nitrification rather than assuming protection everywhere.
  • Organoleptic Qualities: Taste and odor can improve in some systems, but dichloramine/trichloramine formation and actual concentrations can cause complaints.

Cooling Tower Water Disinfection

Chloramines can be used to control biofouling in cooling water systems. However, their slower reactivity compared to other disinfectants means they may not be the most suitable primary option for rapid inactivation of pathogenic microorganisms in certain cooling tower applications. Their prolonged residual can still contribute to overall biofouling control.

Removal of Chloramines

Chloramines are designed to be persistent, but their presence can be undesirable in certain applications (e.g., specific industrial processes, hemodialysis, aquariums). They contribute to the total dissolved solids in water and can have damaging effects if not removed when necessary.

Do not rely on reverse osmosis (RO), softening, boiling or incidental aeration as validated chloramine-removal barriers. Carbon treatment or a compatible chemical reducing agent can be used with verified dose/contact time and outlet monitoring; not all chlorine-removal treatments are equally effective.

Granular activated carbon (GAC) filtration is widely used for chloramine reduction, including catalytic reaction rather than adsorption alone. Reducing 1-2 mg/L (ppm) to below 0.1 mg/L (ppm) is an illustrative treatment result, not a guarantee or a dialysis acceptance rule. Verify contact time, carbon type, flow and outlet concentration; other water constituents affect treatment capacity.

Total chlorine includes free and combined chlorine and is not a species-specific monochloramine result. Use suitable methods to distinguish residuals and check interferences; total minus free chlorine is an operational combined-chlorine estimate.

Benefits and Drawbacks

Benefits

  • Reduced Disinfection Byproducts: May lower THMs and haloacetic acids (HAAs) relative to free chlorine in selected waters, without eliminating all byproducts.
  • Longer Residual Life: Provides a more stable and lasting disinfectant residual in distribution systems due to slower degradation.
  • Taste and Odor: Monochloramine can improve acceptability in some supplies, but sensory effects remain dependent on species and concentration.
  • Corrosion Control: A disinfectant change can alter corrosion and metal release. Orthophosphate treatment requires site-specific optimization and monitoring, not an automatic benefit.
  • pH Conditions: pH 7 or higher can favor monochloramine formation; alkaline pH alone does not establish minimum corrosion or optimum disinfection.

Drawbacks

  • Slower Reaction Rate: Chloramines react slower than chlorine, requiring longer contact times for disinfection. Some research suggests they may be less effective against certain pathogenic microorganisms, such as those causing pneumonia or flu.
  • Formation of Organic Chloramines: Organic nitrogen can form poorly disinfecting organic chloramines; no universal bulk-organics concentration threshold establishes their formation.
  • Nitrification: Ammonia can feed nitrifying organisms, producing nitrite and then nitrate; both require monitoring against the applicable concentration basis and limits.
  • Corrosion of Lead and Copper: Disinfectant, ammonia and pH changes can affect metals. Select corrosion control from actual water and pipe data, rather than assuming orthophosphate is always required.
  • Specific Health Risks: While generally safe for consumption, chloramines pose risks to kidney dialysis patients, fish, and amphibians due to direct absorption into the bloodstream or through gills, respectively.

Health and Environmental Considerations

Health Effects

Water containing chloramines that meets applicable drinking-water standards can be used for drinking, bathing and domestic purposes. This does not replace broader microbiological requirements or individualized clinical advice; special removal is needed for dialysis and suitable aquatic-animal uses.

Impact on Kidney Dialysis Patients, Fish, and Amphibians

Chloramines are toxic when they directly enter the bloodstream. This is a critical concern for:

  • Kidney Dialysis Patients: Dialysis fluid is separated from blood by a membrane, not unrestricted direct contact with raw water. Chloramines can cross and cause hemolysis; water treatment and monitoring must meet the applicable dialysis-water standard.
  • Fish and Amphibians: Fish absorb chloramines directly into their bloodstream through their gills, leading to toxicity. Water used in aquariums and for amphibians must be dechloraminated.

Ammonia-Induced Corrosion

Chloramines can contribute to corrosion issues, particularly with lead and copper piping. Ammonia, released during chemical breakdown, can exacerbate this. To counteract corrosion, water utilities often add orthophosphates as corrosion inhibitors. Incidents like increased lead concentrations in Washington D.C. drinking water in 2003, linked to chloramine disinfection and insufficient corrosion control, highlight the importance of careful monitoring and management.

Nitrate Formation

Ammonia can lead to nitrification, producing nitrite and nitrate. Elevated concentrations can threaten infants under six months through methemoglobinemia. Apply the actual drinking-water limit and reporting basis; confirm whether results are reported as nitrogen or as the nitrate ion.

Regulatory Standards

Regulatory bodies worldwide have established guidelines and standards for disinfectants, including chloramines, to protect public health.

European Union (EU)

Apply Directive (EU) 2020/2184 and national implementation. Chloramination can shift DBP formation toward nitrogen-containing products such as cyanogen chloride and chloropicrin; do not predict future legal limits or assume absence of an individual chloramine entry means no relevant control.

United States (USA)

The U.S. Environmental Protection Agency (EPA) specifies a maximum residual disinfectant level goal (MRDLG) and maximum residual disinfectant level (MRDL) for chloramines of 4 mg/L (ppm) as Cl₂. Apply the rule's monitoring and compliance provisions rather than treating the value as a recommended operating dose.

World Health Organization (WHO)

The cited WHO chemical fact sheet gives a monochloramine guideline value of 3 mg/L (ppm). Available data are inadequate for health-based guideline values for dichloramine and trichloramine; this does not establish their safety or make the guideline a universal law.

AquaChain Engineering Tip

Monitor total/free chlorine, free ammonia, nitrite/nitrate, temperature and water age in chloraminated networks. Interpret trends together; free ammonia alone does not prove nitrification. Use the approved response plan for flushing, mixing, dosing and any temporary disinfectant conversion, with corrosion and byproduct checks.

Frequently Asked Questions

Q: Why are chloramines used instead of chlorine for drinking water disinfection?

A: Monochloramine can provide a longer-lasting distribution residual and reduce some chlorine-derived byproducts. It remains a slower disinfectant and needs verified primary treatment, residual control and nitrification monitoring; taste and odor are system-dependent.

Q: Can chloramines be removed from water?

A: Yes. Properly designed GAC or compatible chemical reduction can remove chloramines, with verified outlet concentrations. Do not rely on boiling or RO alone; dialysis and aquatic-animal systems require their specific treatment and monitoring criteria.

Q: Are there health risks associated with chloramine-disinfected water?

A: Water meeting drinking-water standards can be used normally. Dialysis and aquatic-animal systems need special chloramine removal because their exposure pathways differ from drinking water.

Further information on water quality: Drinking Water

References