Back to Water glossary

Water glossary

Producing Safe & Balanced Drinking Water: A Technical Guide

Explore the critical aspects of drinking water production, from natural sources and purification processes to international standards and quality parameters like pH, alkalinity, and hardness.

Understanding Drinking Water Production and Standards

Drinking water, essential for human health and daily life, can be sourced from various natural origins. The treatment processes applied transform these raw sources into water that is safe, palatable, and meets stringent quality requirements.

Natural Sources of Drinking Water

Drinking water can be produced from:

  • Groundwater: Water found beneath the Earth's surface in aquifers.
  • Surface Waters: Lakes and rivers.
  • Seawater: Requiring advanced desalination processes.

Drinking Water Standards and Quality Parameters

WHO publishes drinking-water guidelines, while the relevant jurisdictions set enforceable requirements. Treatment targets must match the applicable standard and the actual source water.

Key requirements for safe drinking water include:

  • Absence of suspended solids: To ensure clarity and prevent turbidity.
  • Freedom from microorganisms: Pathogenic bacteria, viruses, and parasites must be removed or inactivated.
  • No toxic chemicals: Harmful organic and inorganic compounds must be below specified thresholds.

Beyond basic safety, mineral concentration recommendations vary globally, but most minerals have maximum concentration limits to ensure the water is safe, balanced, and pleasant to drink.

Municipal Drinking Water Focus: Distribution System Integrity

For municipal drinking water, a significant focus is placed on the water's corrosivity and scaling potential. Maintaining these parameters within acceptable ranges is crucial for preserving the integrity and longevity of the vast distribution piping networks.

Distribution-water targets must be determined together from pipe materials, water composition, corrosion behaviour and applicable requirements:

  • pH: Select and validate a site-specific operating range rather than adopting a universal value.
  • Total Alkalinity (TAC): Report the analytical value and unit clearly, such as mg/L as CaCO₃; evaluate it with pH and inorganic carbon.
  • Total Hardness (TH): Report the calcium and magnesium hardness basis and assess distribution stability and scaling at actual conditions.

A single hardness or alkalinity value cannot guarantee corrosion protection. WHO hardness guidance does not establish a universal health-based hardness target. See also Drinking Water Standards.

Bottled Water Considerations

While adhering to similar safety standards, bottled water often prioritizes taste profiles. The taste of bottled water can vary significantly based on its natural mineral content, specifically calcium, magnesium, sulfate, and iron levels. These minerals contribute to the water's unique flavor characteristics.

AquaChain Engineering Tip

When assessing source water for drinking water production, always conduct a comprehensive seasonal water quality analysis. Parameters like turbidity, dissolved organic carbon, and microbial load can fluctuate significantly throughout the year, impacting pre-treatment and disinfection strategies. Planning for these variations is key to consistent and cost-effective operations.

Frequently Asked Questions

Q: Why is balancing corrosivity and scaling potential important for municipal drinking water?

A: Balancing these is crucial to protect the integrity of the water distribution infrastructure. Corrosive water can leach metals from pipes, posing health risks and damaging the network, while excessive scaling can lead to pipe blockages and reduced flow rates.

Q: What is the primary difference in focus between municipal and bottled drinking water production?

A: Both prioritize safety. However, municipal water emphasizes distribution network protection (anti-corrosion/anti-scaling) and broad public health, while bottled water often focuses on unique taste profiles derived from specific mineral compositions, alongside safety.

Q: Can seawater be converted into drinking water?

A: Yes, seawater can be converted into drinking water through desalination processes, most commonly reverse osmosis. This process removes dissolved salts and impurities, making the water potable, though it is generally more energy-intensive and costly than treating fresh water sources.