Back to UF Modules
MANN+HUMMEL logo

International brand dossier

Microdyn-Nadir UF

MICRODYN-NADIR is a historic membrane business within the MANN+HUMMEL water and fluid-solutions lineage; MANN+HUMMEL stated in 2021 that the MICRODYN-NADIR business segment became MANN+HUMMEL Water & Fluid Solutions.

Brand profile and portfolio

MICRODYN-NADIR is a historic membrane business within the MANN+HUMMEL water and fluid-solutions lineage; MANN+HUMMEL stated in 2021 that the MICRODYN-NADIR business segment became MANN+HUMMEL Water & Fluid Solutions.

Its technical influence is in process membranes, flat sheets, spiral-wound elements, capillary and hollow-fiber modules, and MBR products for water, wastewater, and industrial process separation.Microdyn-Nadir UF's position in ultrafiltration modules is defined by product families such as Nanofiltration, Hollow Fiber Module, Filter Module and Bio-Cel Module.

The portfolio is best understood inside pretreatment, reuse, drinking water clarification, MBR solids separation, turbidity control, and pathogen barrier service, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Spira-Cel OY-NP-4040 Series, Spira-Cel D OX NP 4040 and Nadir NP010 P.Selection should focus on membrane material, pore size or MWCO, flux, cleaning method, module format, and skid layout.

27

Models and series

5

Product families

Model index

Quick Model Index

27 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 27 of 27 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

Spira-Cel OY-NP-4040 Series

Nanofiltration

Permeate Tube Inside Diameter: 16.0 mm (tolerance ± 0.1 mm) · Permeate pressure: 0 bar · Permeate pressure, max: 0.35 bar

Spira-Cel OY-NP-4040 Series is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

Spira-Cel D OX NP 4040

Nanofiltration

Ø Inside Permeate tube: 16.0 mm (tolerance ± 0.1 mm) · Permeate pressure (all configurations): 0 bar · Permeate pressure, max: 0.35 bar

Spira-Cel D OX NP 4040 is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

Nadir NP010 P

Nanofiltration

Rejection Na₂SO₄: 35 - 75 % · Processing temperature: 5 - 95 °C · pH range: 0 - 14

The Nadir NP010 P is a PES nanofiltration membrane designed for acid and caustic preparation in the metal and chemical industries.

DetailsPDF

Nadir NP030 P

Nanofiltration

Rejection Na₂SO₄: 80 - 95 % · Processing temperature: 5 - 95 °C · pH range: 0 - 14

The Nadir NP030 P is a nanofiltration membrane module designed for acid and caustic preparation in the metal and chemical industries.

DetailsPDF

Aquadyn

Nanofiltration

Nanofiltration (Nom. Retention NaCl): 10 %, 30 % · Microfiltration (Nom. pore size): 0.05 µm, 0.20 µm · Operating pressure: -30 to -400 mbar

Aquadyn hollow fiber modules offer hydrophilic, low-fouling, high-flux membranes for treating large water volumes.

DetailsPDF

Nadir UH004 P

Nanofiltration

Rejection Dextran 10: 92 - 99 % · Processing temperature: 5 - 95 °C · pH range: 0 - 14

Product Name:NADIR® UH004 P、Type:Membrane for Ultrafiltration.

DetailsPDF

Nadir UH050 P

Nanofiltration

Rejection PVP K30: 75 - 88 % ¹ · Processing temperature: 5 - 95 °C · pH range: 0 - 14

The Nadir UH050 P is a membrane module for ultrafiltration applications, primarily used in the food industry for protein concentration.

DetailsPDF

Nadir UP005 P

Nanofiltration

Rejection Dextran 10 (1): 91 - 98 % · Processing temperature: 5 - 95 °C · pH range: 0 - 14

Product Name: NADIR® UP005 P、Membrane Type: Ultrafiltration membrane.

DetailsPDF

Spira-Cel DS-UH-3838 Series

Nanofiltration

Permeate Tube Inside Diameter: 21.1 mm (tolerance ± 0.1 mm) · Permeate Pressure: 0 bar · Permeate Pressure, max: 0.35 bar

Product Series:SPIRA-CEL® DS–UH–3838 Series Sanitary Modules for Ultrafiltration、Membrane Type:NADIR® UH004、Membrane Material:PESH、Nominal MWCO:4 kDa.

DetailsPDF

Spira-Cel GY-UP-4040

Nanofiltration

Permeate Tube Inside Diameter: 16.0 mm (Tolerance: ± 0.1 mm) · Permeate Pressure: 0 bar · Permeate Pressure, max: 0.35 bar

Spira-Cel GY-UP-4040 is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

Spira-Cel GY-UV200-4040 Series

Nanofiltration

Permeate Tube Inside Diameter: 16.0 mm (± 0.1 mm tolerance) · Permeate Pressure: 0 bar · Permeate Pressure, max: 0.35 bar

Spira-Cel GY-UV200-4040 Series is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

Spira-Cel WY-UP-2440 Series

Nanofiltration

Permeate tube Ø Outside: 19.05 mm (±0.5 mm tolerance) · Permeate tube Length: 1016 mm (+0.1 / -0 mm tolerance) · Permeate pressure: 0 bar

SPIRA-CEL® Modules for Ultrafiltration、Series: WY-UP-2440、Membrane material: PES、Available regular membrane types with Nominal MWCO (kDa):、UP005: 5 kDa、UP010: 10...

DetailsPDF

i Sep 500 PES

Nanofiltration

Permeate: 1.5” Cam & Groove Coupling · Overflow: 2.0” Grooved End Coupling · Pore Size: 0.03 micron

The Microdyn-Nadir iSep 500-PES is a submerged, negative pressure ultrafiltration module with a 0.03-micron pore size.

DetailsPDF

i Sep 500 PVDF

Nanofiltration

Retention / pore size: 0.03 micron · Permeate: 1.5” Cam & Groove Coupling · Overflow: 2.0” Grooved End Coupling

The Microdyn-Nadir iSep 500 PVDF is a submerged, negative pressure ultrafiltration module with a 0.03 micron pore size.

DetailsPDF

SpiraSep 960 PES

Nanofiltration

Retention / pore size: 0.03 micron · Pore Size: 0.03 micron · Membrane Area: 20.9 m² (225 ft²)

The SpiraSep 960 PES is a submerged, negative pressure ultrafiltration module with a 0.03 micron pore size, constructed from Polyethersulfone (PES) membrane.

DetailsPDF

SpiraSep 960 PVDF

Nanofiltration

Pore Size: 0.03 micron · Membrane Area: 20.9 m² (225 ft²) · Transmembrane Pressure Range: 0.07 – 0.7 bar (1 – 10 psi)

The Microdyn-Nadir SpiraSep 960 PVDF is a submerged, vacuum-driven ultrafiltration module designed for high solids and fouling applications.

DetailsPDF

UA1060

Nanofiltration

Permeate port: 2” Victaulic · Feed pump capacity: twice the permeate flux per module but less than 14.4 m³/h (63.4 gpm) at max. 1.2 bar (17.4 psi) · Back flush pump capacity: twice the permeate flux per module but less than 14.4 m³/h (63.4 gpm) at max. 1.2 bar (17.4 psi)

AQUADYN® UA1060 modules are hollow fiber modules for water applications, based on a hydrophilic PAN ultrafiltration membrane.

DetailsPDF

FS10-FC-FUS1582

Nanofiltration

Permeate: 1S Ferrule · Standard Inlet Feed Flow: 3.8 m³/h (adjusted to 1 m/sec feed velocity; optimum velocity may differ per application) · Membrane Area: 5.0 m²

This Microdyn-Nadir hollow fiber UF module features a Polyethersulfone membrane with a 150,000 Dalton molecular cutoff.

DetailsPDF

FS10-FC-FUS5082

Nanofiltration

Permeate: 1S Ferrule · Standard Inlet Feed Flow: 3.8 m³/h (Adjusted to 1 m/sec feed velocity; optimum velocity may differ per application) · Membrane Area: 5.0 m²

This ULTRADYN hollow fiber UF membrane module features a polyethersulfone membrane with a 500,000 Dalton molecular cutoff.

DetailsPDF

FT50-AC-FUC1582

Nanofiltration

Permeate port: 2” Victaulic · Backwash flow rate: <14.6 m³/h (7.0 m³/m² day) · Standard inlet feed flow rate: 13.7 m³/h (Under the condition of the outlet crossflow velocity of 0.2 m/s and the filtration flux of 3.0 m³/m² day.)

This Microdyn-Nadir UF module is designed for ultrafiltration applications, featuring a 50 m² membrane area and a 150,000 Dalton molecular cut-off.

DetailsPDF

Aquadyn UA1060

Hollow Fiber Module

Permeate port: 2” Victaulic · Capacity feed pump: ≤ 14.4 m³/h / ≤ 63.4 gpm · Capacity back flush pump: ≤ 14.4 m³/h / ≤ 63.4 gpm

The Microdyn-Nadir UA1060 is a hollow fiber ultrafiltration module with a double asymmetric PAN membrane structure and an epoxy potting.

DetailsPDF

Aquadyn UE1060

Hollow Fiber Module

Permeate port: 2” Victaulic · Capacity feed pump: ≤ 13.2 m³/h / ≤ 58.1 gpm · Capacity back flush pump: ≤ 13.2 m³/h / ≤ 58.1 gpm

The Aquadyn UE1060 is a hollow fiber ultrafiltration module with a double asymmetric PES membrane and epoxy potting.

DetailsPDF

Microdyn MD 090 TP 2N

Filter Module

Permeate: Backing Flange DN 32, DIN 2501 · Free flow area: 9.7 cm² · Feed flow rate at axial velocity of 1 m/s: 3500 l/h

The Microdyn MD 090 TP 2N is an ultrafiltration module designed for water treatment applications.

DetailsPDF

BC XS-1

Bio-Cel Module

Max. air flow rate (Vn) (at standard conditions according to DIN ISO 2533: 1979-12): · Flow: 6 m³/h · Pore Size: 0.04 µm

The BC XS-1 is a piloting unit from the BIO-CEL® submerged MBR module series utilizing Polyethersulfone (PES) ultrafiltration membranes.

DetailsPDF

BIO-CEL XL

Bio-Cel XL Module

Max. airflow rate (Vn): 665 m³/h (Vn is the volume flow rate at standard conditions according to DIN ISO 2533:1979-12) · Membrane area: 1,920 m² · Poresize: 0.04 µm

The BIO-CEL XL is a submerged membrane bioreactor (MBR) module designed for large-scale biological wastewater treatment applications.

DetailsPDF

General Cataloque

Bio-Cel XL Module

Crossflow for 1 m/sec: 71 ℓ/h, 3 200 ℓ/h, 12 300 ℓ/h, 30 000 ℓ/h · Crossflow for 1 m/s: 690 ℓ/h, 710 ℓ/h, 880 ℓ/h, 1200 ℓ/h, 3500 ℓ/h, 3700 ℓ/h, 3800 ℓ/h, 13300 ℓ/h · Operating Pressure: -30 to -400 mbar

MICRODYN-NADIR offers a wide range of ultrafiltration modules for various applications, including hollow fiber, spiral wound, and submerged configurations.

DetailsPDF

Instruction manual Spira-Cel

Bio-Cel XL Module

Maximum Permeate Pressure: 0.35 bar (during start-up). Permeate outflow must always be unpressurized · Permeate Tube Outer Diameter: 19.05 +0.1/-0.0 mm · Concentrate Pressure (downstream end): Must always exceed 0.7 bar during start-up

Spira-Cel modules are spiral-wound ultrafiltration units featuring permanent hydrophilic NADIR membranes for industrial applications.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose Microdyn-Nadir UF UF Modules

This section answers two questions: which main product families Microdyn-Nadir UF offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are Nanofiltration, Hollow Fiber Module, Filter Module, and Bio-Cel Module. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare module format, flux target, backwash strategy, and chemical tolerance. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

5 product families on this page.

Nanofiltration

20 models in this family. Representative models: Spira-Cel OY-NP-4040 Series, Spira-Cel D OX NP 4040, Nadir NP010 P.

Hollow Fiber Module

2 models in this family. Representative models: Aquadyn UA1060, Aquadyn UE1060.

Filter Module

1 model in this family. Representative models: Microdyn MD 090 TP 2N.

Bio-Cel Module

1 model in this family. Representative models: BC XS-1.

Bio-Cel XL Module

3 models in this family. Representative models: BIO-CEL XL, General Cataloque, Instruction manual Spira-Cel.

Product introductions and documents

Brand Products & Technical Documents

27 models and series

View product applications, datasheets and family manuals.

Nanofiltration

20 product profiles

NF
MANN+HUMMEL logo

Product profile

Spira-Cel OY-NP-4040 Series

Spira-Cel OY-NP-4040 Series is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

NF
MANN+HUMMEL logo

Product profile

Spira-Cel D OX NP 4040

Spira-Cel D OX NP 4040 is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

NF
MANN+HUMMEL logo

Product profile

Nadir NP010 P

The Nadir NP010 P is a PES nanofiltration membrane designed for acid and caustic preparation in the metal and chemical industries.

NF
MANN+HUMMEL logo

Product profile

Nadir NP030 P

The Nadir NP030 P is a nanofiltration membrane module designed for acid and caustic preparation in the metal and chemical industries.

NF
MANN+HUMMEL logo

Product profile

Aquadyn

Aquadyn hollow fiber modules offer hydrophilic, low-fouling, high-flux membranes for treating large water volumes.

NF
MANN+HUMMEL logo

Product profile

Nadir UH004 P

Product Name:NADIR® UH004 P、Type:Membrane for Ultrafiltration.

Show remaining Nanofiltration profiles (14)
NF
MANN+HUMMEL logo

Product profile

Nadir UH050 P

The Nadir UH050 P is a membrane module for ultrafiltration applications, primarily used in the food industry for protein concentration.

NF
MANN+HUMMEL logo

Product profile

Nadir UP005 P

Product Name: NADIR® UP005 P、Membrane Type: Ultrafiltration membrane.

NF
MANN+HUMMEL logo

Product profile

Spira-Cel DS-UH-3838 Series

Product Series:SPIRA-CEL® DS–UH–3838 Series Sanitary Modules for Ultrafiltration、Membrane Type:NADIR® UH004、Membrane Material:PESH、Nominal MWCO:4 kDa.

NF
MANN+HUMMEL logo

Product profile

Spira-Cel GY-UP-4040

Spira-Cel GY-UP-4040 is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

NF
MANN+HUMMEL logo

Product profile

Spira-Cel GY-UV200-4040 Series

Spira-Cel GY-UV200-4040 Series is a nanofiltration membrane element for selection by feed type, target water quality, membrane area, and operating pressure.

NF
MANN+HUMMEL logo

Product profile

Spira-Cel WY-UP-2440 Series

SPIRA-CEL® Modules for Ultrafiltration、Series: WY-UP-2440、Membrane material: PES、Available regular membrane types with Nominal MWCO (kDa):、UP005: 5 kDa、UP010: 10...

NF
MANN+HUMMEL logo

Product profile

i Sep 500 PES

The Microdyn-Nadir iSep 500-PES is a submerged, negative pressure ultrafiltration module with a 0.03-micron pore size.

NF
MANN+HUMMEL logo

Product profile

i Sep 500 PVDF

The Microdyn-Nadir iSep 500 PVDF is a submerged, negative pressure ultrafiltration module with a 0.03 micron pore size.

NF
MANN+HUMMEL logo

Product profile

SpiraSep 960 PES

The SpiraSep 960 PES is a submerged, negative pressure ultrafiltration module with a 0.03 micron pore size, constructed from Polyethersulfone (PES) membrane.

NF
MANN+HUMMEL logo

Product profile

SpiraSep 960 PVDF

The Microdyn-Nadir SpiraSep 960 PVDF is a submerged, vacuum-driven ultrafiltration module designed for high solids and fouling applications.

NF
MANN+HUMMEL logo

Product profile

UA1060

AQUADYN® UA1060 modules are hollow fiber modules for water applications, based on a hydrophilic PAN ultrafiltration membrane.

NF
MANN+HUMMEL logo

Product profile

FS10-FC-FUS1582

This Microdyn-Nadir hollow fiber UF module features a Polyethersulfone membrane with a 150,000 Dalton molecular cutoff.

NF
MANN+HUMMEL logo

Product profile

FS10-FC-FUS5082

This ULTRADYN hollow fiber UF membrane module features a polyethersulfone membrane with a 500,000 Dalton molecular cutoff.

NF
MANN+HUMMEL logo

Product profile

FT50-AC-FUC1582

This Microdyn-Nadir UF module is designed for ultrafiltration applications, featuring a 50 m² membrane area and a 150,000 Dalton molecular cut-off.

Hollow Fiber Module

2 product profiles

UF
MANN+HUMMEL logo

Product profile

Aquadyn UA1060

The Microdyn-Nadir UA1060 is a hollow fiber ultrafiltration module with a double asymmetric PAN membrane structure and an epoxy potting.

UF
MANN+HUMMEL logo

Product profile

Aquadyn UE1060

The Aquadyn UE1060 is a hollow fiber ultrafiltration module with a double asymmetric PES membrane and epoxy potting.

Filter Module

1 product profiles

UF
MANN+HUMMEL logo

Product profile

Microdyn MD 090 TP 2N

The Microdyn MD 090 TP 2N is an ultrafiltration module designed for water treatment applications.

Bio-Cel Module

1 product profiles

UF
MANN+HUMMEL logo

Product profile

BC XS-1

The BC XS-1 is a piloting unit from the BIO-CEL® submerged MBR module series utilizing Polyethersulfone (PES) ultrafiltration membranes.

Bio-Cel XL Module

3 product profiles

UF Modules
MANN+HUMMEL logo

Product profile

BIO-CEL XL

The BIO-CEL XL is a submerged membrane bioreactor (MBR) module designed for large-scale biological wastewater treatment applications.

UF
MANN+HUMMEL logo

Product profile

General Cataloque

MICRODYN-NADIR offers a wide range of ultrafiltration modules for various applications, including hollow fiber, spiral wound, and submerged configurations.

UF
MANN+HUMMEL logo

Product profile

Instruction manual Spira-Cel

Spira-Cel modules are spiral-wound ultrafiltration units featuring permanent hydrophilic NADIR membranes for industrial applications.

Microdyn-Nadir UF UF Modules | Models & Datasheets | AquaChain Guide