Back to UF Modules
DuPont logo

International brand dossier

Inge (DuPont) Ultrafiltration

DuPont Water Solutions is a global water purification and separation portfolio built around recognized technologies such as FilmTec membranes, AmberLite resins, inge ultrafiltration, and related industrial separation materials.

Brand profile and portfolio

DuPont Water Solutions is a global water purification and separation portfolio built around recognized technologies such as FilmTec membranes, AmberLite resins, inge ultrafiltration, and related industrial separation materials.

Its influence comes from breadth: the same corporate water platform is used in drinking water, desalination, industrial reuse, pharmaceutical and food processing, electronics ultrapure water, and selective purification.

Inge (DuPont) Ultrafiltration's position in ultrafiltration modules is defined by product families such as UF Module with Multibore membrane, 4" UF Module with Multibore 0.9 membrane, Multibore Membrane and dizzer XL Module with Multibore 0.9 membrane.The portfolio is best understood inside pretreatment, reuse, drinking water clarification, MBR solids separation, turbidity control, and pathogen barrier service, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Dizzer XL 0.9 MB 60 W, Dizzer P 4040-6.0 and Multibore membrane 7.

9

Models and series

8

Product families

Model index

Quick Model Index

9 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 9 of 9 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

Dizzer XL 0.9 MB 60 W

UF Module with Multibore membrane

Retention / pore size: 0.02 µm · Membrame area: 40 m² (430 sq.ft.) · Pore size: approx. 0.02 µm

This Inge Dizzer XL ultrafiltration module features Multibore membranes with a pore size of approximately 0.02 µm.

DetailsPDF

Dizzer P 4040-6.0

4" UF Module with Multibore 0.9 membrane

Pore size: approx. 0.02 µm · Maximum system pressure: 10 bar (145 psi) · Burst pressure: >10 bar (>150 psi)

The dizzer® P series consists of Ultrafiltration modules designed for small-scale applications, such as Point-of-Use and Point-of-Entry systems.

DetailsPDF

Multibore membrane 7

Multibore Membrane

Retention / pore size: 20 nm · Pore size: approx. 20 nm · Transmembrane pressure in Filtration: 0.1 – 1.5 bar (1.5 – 20 psi)

This Inge (DuPont) Multibore® membrane module is designed for ultrafiltration with a pore size of approximately 20 nm.

DetailsPDF

Dizzer XL 0.9 MB 60 WR

dizzer XL Module with Multibore 0.9 membrane

Pore size: approx. 0.02 µm · Pressure max: 5 bar (70 psi) · Burst pressure membrane: > 10 bar (> 150 psi)

The Dizzer XL 0.9 MB 60 WR is an ultrafiltration module featuring Multibore 0.9 PESM membranes.

DetailsPDF

Dizzer XL 0.9 MB 64 P

dizzer XL Module with Multibore 0.9 membrane

Membrane area: 64 m² · Pore size: ca. 0.02 µm · Filtration pressure: 0.1 – 1.5 bar

The Dizzer XL 0.9 MB 64 P is an ultrafiltration module designed for water treatment applications.

DetailsPDF

Dizzer XL 1.5 MB 40 ST

dizzer XL Module with Multibore 1.5 membrane

Active membrane area: 40 m² / 430 ft² · Length incl. T-piece (B): 1879 mm / 74.0 inch · Module diameter (C): 250 mm / 9.8 inch

This Inge (DuPont) Dizzer XL 1.5 MB 40 ST is an ultrafiltration module featuring a Multibore® 1.5 membrane with 40 m² active area.

DetailsPDF

T-Rack vario 2 /4 rows

T-Rack Vario

Feed/drain header: PVC-U (with fixed flange according to ISO 7005 PN10, ANSI class 150) · Filtrate header: PVC-U (160 mm, with fixed flange according to ISO 7005 PN10, ANSI class 150) · Burst pressure membrane: > 10 bar (> 150 psi)

The T-Rack® vario is an integrated ultrafiltration system offering flexible configurations with two or four rows of dizzer® modules.

DetailsPDF

T-Rack 3.0-3.2 2 /4 rows

T-Rack 3.0

High Capacity: Supports up to 136 modules per rack · Pore size: approx. 0.02 µm · Burst pressure (membrane): > 10 bar (> 150 psi)

The T-Rack® 3.0 is a robust ultrafiltration rack solution for large-scale systems, integrating dizzer® XL modules with Multibore® membranes.

DetailsPDF

T-Rack 3.0 S 2 / 4 rows

T-Rack 3.0 S

Design pressure: 5 bar at 40°C with a service life of 10 years. This corresponds to a design pressure of 8.2 bar at 20°C · Burst pressure (membrane): > 10 bar (> 150 psi) · Permissible temperature range: 1 – 40 °C (34 – 104 °F)

The T-Rack 3.0 S is a compact and robust ultrafiltration system designed for space-saving and mobile applications.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose Inge DuPont UF Modules

This section answers two questions: which main product families Inge DuPont offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are UF Module with Multibore membrane, 4" UF Module with Multibore 0.9 membrane, Multibore Membrane, and dizzer XL Module with Multibore 0.9 membrane. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare module format, flux target, backwash strategy, and chemical tolerance. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

Showing 6 main families; all 8 appear in the model index below.

UF Module with Multibore membrane

1 model in this family. Representative models: Dizzer XL 0.9 MB 60 W.

4" UF Module with Multibore 0.9 membrane

1 model in this family. Representative models: Dizzer P 4040-6.0.

Multibore Membrane

1 model in this family. Representative models: Multibore membrane 7.

dizzer XL Module with Multibore 0.9 membrane

2 models in this family. Representative models: Dizzer XL 0.9 MB 60 WR, Dizzer XL 0.9 MB 64 P.

dizzer XL Module with Multibore 1.5 membrane

1 model in this family. Representative models: Dizzer XL 1.5 MB 40 ST.

T-Rack Vario

1 model in this family. Representative models: T-Rack vario 2 /4 rows.

Product introductions and documents

Brand Products & Technical Documents

9 models and series

View product applications, datasheets and family manuals.

UF Module with Multibore membrane

1 product profiles

UF
DuPont logo

Product profile

Dizzer XL 0.9 MB 60 W

This Inge Dizzer XL ultrafiltration module features Multibore membranes with a pore size of approximately 0.02 µm.

4" UF Module with Multibore 0.9 membrane

1 product profiles

UF
DuPont logo

Product profile

Dizzer P 4040-6.0

The dizzer® P series consists of Ultrafiltration modules designed for small-scale applications, such as Point-of-Use and Point-of-Entry systems.

Multibore Membrane

1 product profiles

UF
DuPont logo

Product profile

Multibore membrane 7

This Inge (DuPont) Multibore® membrane module is designed for ultrafiltration with a pore size of approximately 20 nm.

dizzer XL Module with Multibore 0.9 membrane

2 product profiles

UF
DuPont logo

Product profile

Dizzer XL 0.9 MB 60 WR

The Dizzer XL 0.9 MB 60 WR is an ultrafiltration module featuring Multibore 0.9 PESM membranes.

UF
DuPont logo

Product profile

Dizzer XL 0.9 MB 64 P

The Dizzer XL 0.9 MB 64 P is an ultrafiltration module designed for water treatment applications.

dizzer XL Module with Multibore 1.5 membrane

1 product profiles

UF
DuPont logo

Product profile

Dizzer XL 1.5 MB 40 ST

This Inge (DuPont) Dizzer XL 1.5 MB 40 ST is an ultrafiltration module featuring a Multibore® 1.5 membrane with 40 m² active area.

T-Rack Vario

1 product profiles

UF
DuPont logo

Product profile

T-Rack vario 2 /4 rows

The T-Rack® vario is an integrated ultrafiltration system offering flexible configurations with two or four rows of dizzer® modules.

T-Rack 3.0

1 product profiles

UF
DuPont logo

Product profile

T-Rack 3.0-3.2 2 /4 rows

The T-Rack® 3.0 is a robust ultrafiltration rack solution for large-scale systems, integrating dizzer® XL modules with Multibore® membranes.

T-Rack 3.0 S

1 product profiles

UF
DuPont logo

Product profile

T-Rack 3.0 S 2 / 4 rows

The T-Rack 3.0 S is a compact and robust ultrafiltration system designed for space-saving and mobile applications.

Inge (DuPont) Ultrafiltration UF Modules | Models & Datasheets | AquaChain Guide