Horizontal multi-stage pumps
3 models in this family. Representative models: OP, TM, TMV, CB.
International brand dossier
SAER Elettropompe is an Italian pump manufacturer founded in 1951 and known for submersible and surface pumps, motors, centrifugal pumps, and broad hydraulic coverage.
SAER Elettropompe is an Italian pump manufacturer founded in 1951 and known for submersible and surface pumps, motors, centrifugal pumps, and broad hydraulic coverage.In water-treatment and RO-adjacent projects it is relevant where Italian-made pump families, motor options, material selection, and industrial or civil water duties must be compared.
SAER Pumps's position in pumps and pumping equipment is defined by product families such as Horizontal multi-stage pumps, Pressure units, End suction pumps and Submersible pumps.The portfolio is best understood inside raw water intake, RO/NF feed, transfer, boosting, chemical dosing, wastewater lift, and desalination hydraulics, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.
Representative series on this page include OP, TM, TMV and CB.Selection should focus on flow, head, efficiency, NPSH margin, wetted materials, seals, and drive arrangement.
11
Models and series
7
Product families
Quick Model Index
Search specifications and compare candidates with products from other brands in the same category.
Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.
Showing 11 of 11 models
Compare 2–4 compatible models across brands. Your shortlist is saved on this device.
OP
Horizontal multi-stage pumps
Temperature of pumped liquid: min 0°C – max 90°C · Ambient temperature: max 40°C · Discharge connection: Cast iron GJL250 (EN-GJL250)
The SAER OP series comprises multi-stage horizontal centrifugal electric pumps designed for clean water applications, including domestic use, gardening, and general water...
TM, TMV
Horizontal multi-stage pumps
Selection cues: flow · head · power and wetted-part materials
The SAER TM and TMV are centrifugal pumps designed for various liquid transfer applications.
CB
Horizontal multi-stage pumps
Liquid temperature: From -15°C to +70°C · Maximum operating pressure: 9 bar · Maximum ambient temperature: 40°C (for higher temperatures, verification required)
The SAER KF series consists of peripheral electric pumps designed for domestic systems, water supply, and pressure boosting applications.
T-ONE
Pressure units
Flow: Max 15 m³/h · Head: Max 110 m · Liquid temperature: Min -15°C, Max 35°C
The T-ONE is a compact, patented electronic pressurization system by SAER Pumps for water distribution in civil, agricultural, and industrial applications.
IR, IRX
End suction pumps
Temperature of the pumped liquid: -15°C to +120°C · Max environment temperature: 40°C (for higher temperatures, verify) · Max manometric suction height: Approximately 1.5 m (characteristics reduce for heights up to 6-7 m)
The SAER IR, IRX series are close-coupled, end-suction electric pumps designed according to EN 733 rules for continuous service with clear water.
CL95-CLE95
Submersible pumps
Cable Material: Suitable for use with drinking water · Frequency: 50 Hz (3000 1/min) and 60 Hz (3600 1/min) · Three phase (0.37-3 kW): 30
The SAER CL95-CLE95 are 4-inch oil-filled, rewindable submersible motors available in 50 Hz and 60 Hz frequencies.
MBS/H/L
Submersible pumps
Maximum Flow Rate (Qmax): 18 m³/h · Maximum Head (Hmax): 113 m · Upper Support (for Head > 60 m versions): Precision casted AISI 304 steel
The SAER MBS/H/L series consists of enbloc submersible, surface, and in-line electric pumps designed for various water transfer applications.
NS-96
Submersible pumps
Rotation speed: 2900 1/min · Delivery connection: 1”1/4 G
The SAER NS-96 is a 4” electric submersible pump designed for various applications.
L-2P
Single stage in-line pumps
Power Range: 0.37 kW up to 75 kW · Liquid Temperature: Up to 140°C · Operating Pressure: PN16 as standard (PN25 on request up to DN50)
The SAER L-2P is a single-stage, in-line centrifugal pump designed for heating, cooling, civil, industrial, and water supply systems.
SKD
Split casing pumps
Selection cues: flow · head · power and wetted-part materials
The SAER SKD is a split-case pump designed for various applications.
Product range and selection
This section answers two questions: which main product families SAER offers, and which parameters to compare before choosing a specific model.
The main families shown on this page are Horizontal multi-stage pumps, Pressure units, End suction pumps, and Submersible pumps. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.
After choosing a product family, compare flow and head, materials, efficiency, and duty cycle. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.
Showing 6 main families; all 7 appear in the model index below.
Horizontal multi-stage pumps
3 models in this family. Representative models: OP, TM, TMV, CB.
Pressure units
1 model in this family. Representative models: T-ONE.
End suction pumps
1 model in this family. Representative models: IR, IRX.
Submersible pumps
3 models in this family. Representative models: CL95-CLE95, MBS/H/L, NS-96.
Single stage in-line pumps
1 model in this family. Representative models: L-2P.
Split casing pumps
1 model in this family. Representative models: SKD.
Brand Products & Technical Documents
View product applications, datasheets and family manuals.
3 product profiles
Product profile
The SAER OP series comprises multi-stage horizontal centrifugal electric pumps designed for clean water applications, including domestic use, gardening, and general water...
Product profile
The SAER TM and TMV are centrifugal pumps designed for various liquid transfer applications.
Product profile
The SAER KF series consists of peripheral electric pumps designed for domestic systems, water supply, and pressure boosting applications.
1 product profiles
Product profile
The T-ONE is a compact, patented electronic pressurization system by SAER Pumps for water distribution in civil, agricultural, and industrial applications.
1 product profiles
Product profile
The SAER IR, IRX series are close-coupled, end-suction electric pumps designed according to EN 733 rules for continuous service with clear water.
3 product profiles
Product profile
The SAER CL95-CLE95 are 4-inch oil-filled, rewindable submersible motors available in 50 Hz and 60 Hz frequencies.
Product profile
The SAER MBS/H/L series consists of enbloc submersible, surface, and in-line electric pumps designed for various water transfer applications.
Product profile
The SAER NS-96 is a 4” electric submersible pump designed for various applications.
1 product profiles
Product profile
The SAER L-2P is a single-stage, in-line centrifugal pump designed for heating, cooling, civil, industrial, and water supply systems.
1 product profiles
Product profile
The SAER SKD is a split-case pump designed for various applications.
1 product profiles
Product profile
The NCA is a volute casing pump designed for various applications.