Back to Electrodeionization (EDI)
Veolia logo

International brand dossier

Veolia E-Cell-EDI / EDR

Veolia Water Technologies & Solutions combines equipment, chemicals, analytics, engineering, and water-management services that were shaped by the former SUEZ Water Technologies platform.

Brand profile and portfolio

Veolia Water Technologies & Solutions combines equipment, chemicals, analytics, engineering, and water-management services that were shaped by the former SUEZ Water Technologies platform.For product selection, Veolia/SUEZ records should be read as plant-scale water-technology lines where component performance, controls, serviceability, and lifecycle support must be assessed together.

Veolia E-Cell-EDI / EDR's position in electrodeionization (EDI) is defined by product families such as E-Cell modules, EDI stacks and EDR systems / stacks.The portfolio is best understood inside ultrapure water, pharmaceutical water, power generation makeup, electronics rinsing, and final polishing after RO, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.

Representative series on this page include EDI Pro E-Cell EU Series, EDI AM Pro E-Cell EU Series and EDI E-Cell Stack MK-7.Selection should focus on feed conductivity, CO2 and silica load, module capacity, recovery, and power integration.

16

Models and series

4

Product families

Model index

Quick Model Index

16 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 16 of 16 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

EDI Pro E-Cell EU Series

E-Cell modules

Membrane rejection: 99.0 to 99.5% · Stack product flow rate, nominal: 5 m3/hr · Pressure Switch: RO Feeds, RO2 Permeate, RO Concentrates

EDI Pro E-Cell EU Series is a water-treatment membrane element to compare by feed type, target water quality, membrane area, and operating pressure.

DetailsPDF

EDI AM Pro E-Cell EU Series

E-Cell modules

Membrane rejection: 99.0 to 99.5% · Stack product flow rate, nom: 16.7 gpm (3.8 m3/hr) · System Inlet Pressure: 30-60 PSI (2-4 Bar)

The PRO E-Cell Series offers integrated Reverse Osmosis (RO) and Electrodeionization (EDI) systems on a common skid, designed for capacities from 50 to 200 gpm.

DetailsPDF

EDI E-Cell Stack MK-7

EDI stacks

Nominal Flow: 7.0 m³/h (31 gpm) · Flow Rate Range: 4.2 – 7.8 m³/h (18 – 34 gpm) · Inlet Pressure: ≤ 6.9 bar (100 psi)

The E-Cell EDI MK-7 Stack is an industrial electrodeionization module designed to produce ultrapure water for applications like boiler feed and microelectronics rinsing.

DetailsPDF

EDI E-Cell 3X Stack

EDI stacks

Nominal Flow: 5.0 m³/h (22 gpm) · Flow Rate Range: 2.3–6.4 m³/h (10–28 gpm) · Inlet Pressure: ≤ 6.9 bar (100 psi)

The E-Cell-3X Stack is an industrial electrodeionization module designed to produce ultrapure water for semiconductor rinsing and boiler feed applications.

DetailsPDF

Hot Water E-Cell Stack MK-3PharmHT

EDI stacks

Nominal Flow: 3.4 m3/h (15 gpm) · Flow Rate Range: 1.6–5.4 m3/h (7.0–23.8 gpm) · Inlet Pressure: ≤ 6.9 bar (100 psi) (Determined by downstream pressure requirements, operation choice, and stack pressure drop.)

The E-Cell MK-3PharmHT Stack is a hot water sanitizable electrodeionization module for ultrapure water production in pharmaceutical and biotech applications.

DetailsPDF

EDI E-Cell Stack MK-3

EDI stacks

Nominal Flow: 3.4 m³/h (15 gpm) · Flow Rate Range: 1.6 – 4.5 m³/h (7.0 – 20 gpm) · Inlet Pressure: ≤ 6.9 bar (100 psi)

The Veolia E-Cell EDI MK-3 Stack is an industrial electrodeionization module designed for ultrapure water production in semiconductor fabrication and other high-purity...

DetailsPDF

Hot Water E-Cell Stack MK-3MiniHT

EDI stacks

Nominal Flow: 1.14 m³/h (5.0 gpm) · Flow Rate Range: 0.5–1.6 m³/h (2.2–7.0 gpm) · Maximum Sanitization Inlet Pressure: 2.1 bar (30 psi)

The E-Cell EDI MK-3MiniHT Stack is a hot water sanitizable electrodeionization module designed for ultrapure water production in pharmaceutical and laboratory...

DetailsPDF

EDI E-Cell 3X EU Standard

E-Cell modules

Product-water flow: 3.4 to 76.3 m³/h · Feed Pressure: 4.1 to 6.9 bar · Dilute Pressure Drop: 1.4 to 2.8 bar

These are Electrodeionization (EDI) E-Cell 3X EU Standard systems, designed for producing ultrapure water with flow rates ranging from 3.4 to 76.3 m³/h across 1 to 12...

DetailsPDF

EDI E-Cell 3X Standard

E-Cell modules

Flow Range: 15 – 336gpm (3.4 - 76.3 m3/h) · Feed Pressure: 60 to 100 psi (4.1 to 6.9 bar) · Dilute Pressure Drop: 20 to 40 psi (1.4 to 2.8 bar)

The Veolia E-Cell 3X Standard is a modular electrodeionization system designed for producing high-purity water.

DetailsPDF

EDI Mobile EDI CE

General Products

Retention / pore size: 1 Micron Cartridge Filters · Conductivity: <0.1 µS/cm for both models

This is a mobile Electrodeionization (EDI) system designed for water demineralization, built within a 40ft high cube ISO container.

DetailsPDF

EDR 2020 system

EDR systems / stacks

Maximum Feed Pressure: 50 psi · Typical Power consumption: 2 – 4 kWh/1,000 gallons of product water · Flow: Product Outlet, Concentrate Outlet

The Veolia EDR 2020 is an industrial desalination system featuring carbon electrodes for no gas production and high water recovery up to 94%.

DetailsPDF

EDR Stack MKIV

EDR systems / stacks

Maximum Feed Pressure: 50 psi · Temperature: 40 to 100°F (4 to 38°C) · pH: 2 to 9

The Veolia EDR Stack MKIV is an Electrodialysis Reversal module designed for desalination of various water streams, including brackish water and industrial wastewater.

DetailsPDF

ED Ionics Electrodialysis Stack

EDI stacks

Operating Pressure: 2-4 bar (28-57 psi) · Temperature: 40 to 100ºF (4 to 38ºC) · Typical Feed Concentration: 1-10%

The ED Ionics Electrodialysis Stack is designed for brine concentration and salt removal using ion exchange membranes, spacers, and electrodes.

DetailsPDF

ED Ionics Electrodialysis MK1 Stack

EDI stacks

Selection cues: product-water flow · feed conductivity · recovery and operating temperature

This laboratory-scale Electrodialysis (ED/BPED) stack is designed for experimental use in academic and research settings.

DetailsPDF

RO-EDI Combined

General Products

Overflow/ Tank Drain: 1” (GEN #2, #3), 2” (GEN #4), 4” (GEN #5) · Water Pressure (min / max): 2.0 to 4.0 Bar · EDI Recovery: 85-95% (For GEN #3, #4, & #5, 100% EDI recovery when EDI rejects are recycled to RO feed)

The DELTAFLOW system combines Reverse Osmosis (RO) and Electrodionization (EDI) technologies to produce ultrapure water for industrial users, with models available in...

DetailsPDF

E-Cell Stacks and Parts

EDI stacks

Selection cues: product-water flow · feed conductivity · recovery and operating temperature

Veolia E-Cell stacks are designed for electrodeionization and come in various models including MK-3, MK-3PharmHT, and MK-7.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose Veolia E-Cell- / Electrodeionization (EDI)

This section answers two questions: which main product families Veolia E-Cell- / offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are E-Cell modules, EDI stacks, General Products, and EDR systems / stacks. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare feed conductivity, silica/CO2 load, recovery target, and stack configuration. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

4 product families on this page.

E-Cell modules

4 models in this family. Representative models: EDI Pro E-Cell EU Series, EDI AM Pro E-Cell EU Series, EDI E-Cell 3X EU Standard.

EDI stacks

8 models in this family. Representative models: EDI E-Cell Stack MK-7, EDI E-Cell 3X Stack, Hot Water E-Cell Stack MK-3PharmHT.

General Products

2 models in this family. Representative models: EDI Mobile EDI CE, RO-EDI Combined.

EDR systems / stacks

2 models in this family. Representative models: EDR 2020 system, EDR Stack MKIV.

Product introductions and documents

Brand Products & Technical Documents

16 models and series

View product applications, datasheets and family manuals.

E-Cell modules

4 product profiles

EDI
Veolia logo

Product profile

EDI Pro E-Cell EU Series

EDI Pro E-Cell EU Series is a water-treatment membrane element to compare by feed type, target water quality, membrane area, and operating pressure.

EDI
Veolia logo

Product profile

EDI AM Pro E-Cell EU Series

The PRO E-Cell Series offers integrated Reverse Osmosis (RO) and Electrodeionization (EDI) systems on a common skid, designed for capacities from 50 to 200 gpm.

EDI
Veolia logo

Product profile

EDI E-Cell 3X EU Standard

These are Electrodeionization (EDI) E-Cell 3X EU Standard systems, designed for producing ultrapure water with flow rates ranging from 3.4 to 76.3 m³/h across 1 to 12...

EDI
Veolia logo

Product profile

EDI E-Cell 3X Standard

The Veolia E-Cell 3X Standard is a modular electrodeionization system designed for producing high-purity water.

EDI stacks

8 product profiles

EDI
Veolia logo

Product profile

EDI E-Cell Stack MK-7

The E-Cell EDI MK-7 Stack is an industrial electrodeionization module designed to produce ultrapure water for applications like boiler feed and microelectronics rinsing.

EDI
Veolia logo

Product profile

EDI E-Cell 3X Stack

The E-Cell-3X Stack is an industrial electrodeionization module designed to produce ultrapure water for semiconductor rinsing and boiler feed applications.

EDI
Veolia logo

Product profile

Hot Water E-Cell Stack MK-3PharmHT

The E-Cell MK-3PharmHT Stack is a hot water sanitizable electrodeionization module for ultrapure water production in pharmaceutical and biotech applications.

EDI
Veolia logo

Product profile

EDI E-Cell Stack MK-3

The Veolia E-Cell EDI MK-3 Stack is an industrial electrodeionization module designed for ultrapure water production in semiconductor fabrication and other high-purity...

EDI
Veolia logo

Product profile

Hot Water E-Cell Stack MK-3MiniHT

The E-Cell EDI MK-3MiniHT Stack is a hot water sanitizable electrodeionization module designed for ultrapure water production in pharmaceutical and laboratory...

EDI
Veolia logo

Product profile

ED Ionics Electrodialysis Stack

The ED Ionics Electrodialysis Stack is designed for brine concentration and salt removal using ion exchange membranes, spacers, and electrodes.

Show remaining EDI stacks profiles (2)
EDI
Veolia logo

Product profile

ED Ionics Electrodialysis MK1 Stack

This laboratory-scale Electrodialysis (ED/BPED) stack is designed for experimental use in academic and research settings.

EDI
Veolia logo

Product profile

E-Cell Stacks and Parts

Veolia E-Cell stacks are designed for electrodeionization and come in various models including MK-3, MK-3PharmHT, and MK-7.

General Products

2 product profiles

EDI
Veolia logo

Product profile

EDI Mobile EDI CE

This is a mobile Electrodeionization (EDI) system designed for water demineralization, built within a 40ft high cube ISO container.

RO
Veolia logo

Product profile

RO-EDI Combined

The DELTAFLOW system combines Reverse Osmosis (RO) and Electrodionization (EDI) technologies to produce ultrapure water for industrial users, with models available in...

EDR systems / stacks

2 product profiles

Electrodeionization (EDI)
Veolia logo

Product profile

EDR 2020 system

The Veolia EDR 2020 is an industrial desalination system featuring carbon electrodes for no gas production and high water recovery up to 94%.

Electrodeionization (EDI)
Veolia logo

Product profile

EDR Stack MKIV

The Veolia EDR Stack MKIV is an Electrodialysis Reversal module designed for desalination of various water streams, including brackish water and industrial wastewater.

Family manuals and general documents (1)
Technical document
Veolia logo

Technical document

E-Cell EDI MK-3 / MK-5 / MK-9 (VEOLIA E-CELL EDI, EN brochure)

The E-Cell EDI MK-3 / MK-5 / MK-9 are electrodeionization modules for final demineralization in pure water production, offering advantages over traditional mixed-bed...

Veolia E-Cell-EDI / EDR Electrodeionization (EDI) | Models & Datasheets | AquaChain Guide