EXL modules
4 models in this family. Representative models: EXL-650, EXL-750, EXL-850.
International brand dossier
SnowPure EDI
SnowPure Water Technologies supplies Electropure EDI modules and related high-purity water components including ion-exchange membranes, ED, NF, UF, gas-transfer membranes, power supplies, flow switches, and instrumentation.It is relevant where compact continuous deionization, chemical-free polishing, module integration, and OEM support matter.
SnowPure EDI's position in electrodeionization (EDI) is defined by product families such as EXL modules, XL / lab modules and Power supplies.The portfolio is best understood inside ultrapure water, pharmaceutical water, power generation makeup, electronics rinsing, and final polishing after RO, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.
Representative series on this page include EXL-650, EXL-750 and EXL-850.Selection should focus on feed conductivity, CO2 and silica load, module capacity, recovery, and power integration.These cues help users understand the brand's strongest fit before moving into the model index and product cards for finer comparison.
20
Indexed models
4
Product families
0
Subgroups
Product range and selection
How to choose SnowPure Electrodeionization (EDI)
This section answers two questions: which main product families SnowPure offers, and which parameters to compare before choosing a specific model.
Step 1: Choose a product family by application
The main families shown on this page are EXL modules, XL / lab modules, General Products, and Power supplies. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.
Step 2: Confirm the model by key parameters
After choosing a product family, compare feed conductivity, silica/CO2 load, recovery target, and stack configuration. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.
Product family overview
4 product familys on this page.
XL / lab modules
6 models in this family. Representative models: XL-100-R, XL-060-RL, XL-100-SR.
General Products
1 model in this family. Representative models: 500 W.
Power supplies
9 models in this family. Representative models: 1.0 kW, 1.5 kW, 2.0 kW.
Quick Model Index
Fast lookup for 20 indexed products
Search models, families, applications, or parameters; compare 2–4 candidates, save or export the shortlist, and open it on another device by link or QR code.
Showing 20 of 20 models
Select 2–4 models to compare. Your shortlist is saved on this device and can travel by link or QR code.
EXL-650
EXL modules
Maximum Pressure: 7 bar (100 psi) · Maximum Feedwater Conductivity Equivalent Including CO₂ (FCE, see calculation): <9 uS
The SnowPure EXL-650 is an Electrodeionization (EDI) module designed for continuous water purification without upsets.
EXL-750
EXL modules
Maximum Pressure: 7 bar (100 psi) · Operating Pressure: 3 bar at 7.0 m³/h (45 psi at 30 gpm)
The SnowPure EXL-750 is an Electrodeionization (EDI) module designed for continuous, reliable water purification. It features patented Excellion membranes.
EXL-850
EXL modules
Maximum Pressure: 7 bar (100 psi) · Conductivity Equivalent Including CO₂ (FCE, see calculation): <9 uS
The SnowPure EXL-850 is an Electrodeionization (EDI) module designed for continuous water purification without hazardous waste or regeneration chemicals.
EXL-510-HTS
EXL modules
Product-water flow: 2.5-4.0 m³/h (10-18 gpm) · Concentrate Flow Direction: Upward · Feed Flow Direction: Upward
The EXL-510-HTS is an improved High Temperature Stable (HTS) Electropure™ Electrodeionization module suitable for pharmaceutical applications.
XL-100-R
XL / lab modules
Product-water flow: 100 l/h (0 · Total Chlorine (as Cl₂) and Ozone: Mentioned as a parameter, but no quantitative limits are visible in the extract
The SnowPure EDI XL-100-R is an industrial electrodeionization module designed for continuous water purification.
XL-060-RL
XL / lab modules
Product Flow: 10 or 20 lph, typical · Material: (Not specified in the extracted text)
This SnowPure EDI module is part of the Zap-10-M or Zap-20-M series for producing ultrapure water.
XL-100-SR
XL / lab modules
Total Chlorine (as Cl₂) and Ozone: See the official PDF for exact tabulated values
The Electropure XL-SR is a Pharmaceutical Electrodeionization (EDI) module designed for high-purity water production.
XL-100-HTS
XL / lab modules
Selection cues: product-water flow · feed conductivity · recovery and operating temperature
The XL-100-HTS is an Electrodeionization (EDI) module designed for water treatment applications.
XL-100-DER
XL / lab modules
Maximum Feedwater Conductivity Equivalent (including CO₂): <33 μS/cm · pH (recommended): 7.0 to 7.5 · pH (operating range): 5 to 9.5
The XL-100-DER is an Electrodeionization (EDI) module designed for purifying RO water in central kidney dialysis systems, removing endotoxins for improved results.
Zap-10M
XL / lab modules
Flow: 10 or 20 lph · Power supply: 24 or 48VDC switching power supply included · Recovery: > 75%
This Zap-10M EDI module utilizes SnowPure's Electropure technology for high-purity laboratory water applications.
500 W
General Products
Output DC Voltage (Fixed Voltage Mode): 48 VDC · Output DC Current (Has Overcurrent Protection): 0-10 Amps DC (ADC) · Power Efficiency Rating (@Full Load): > 87%
This is a 500W air-cooled DC power supply designed for SnowPure's Electropure™ EDI modules, specifically the XL-060 and XL-100 Series. It features over-current.
1.0 kW
Power supplies
Output DC Voltage (Constant Voltage Mode): 0-100 VDC · Output DC Current (Has Overcurrent Protection): 0-9 Amps DC (ADC) · Max Power Output: 1.0kW
This 1.0 kW DC power supply provides constant voltage control for SnowPure Electropure™ EDI modules. It features air cooling, over-current and over-temperature protection.
1.5 kW
Power supplies
Output DC Voltage (Constant Voltage Mode): 0-300 VDC · Output DC Current (Has Overcurrent Protection): 0-5 Amps DC (ADC) · Power: 1.5kW
This 1.5 kW DC power supply by SnowPure is designed for use with Electropure™ EDI modules. It features over-current, short-circuit.
2.0 kW
Power supplies
Output DC Voltage (Constant Voltage Mode): 0-220 VDC · Output DC Current (Has Overcurrent Protection): 0-8 Amps DC (ADC) · Total Power: 2.0kW
This is a 2.0kW DC power supply designed for SnowPure EDI modules. It features constant voltage control, overcurrent protection, and a compact, air-cooled design.
3.0 kW
Power supplies
Output DC Voltage (Constant Voltage Mode): 200-380 VDC · Output DC Current (with Overcurrent Protection): 0-8 Amps DC (ADC) · Power Efficiency Rating (@Full Load): > 95%
This 3.0 kW DC power supply is designed for SnowPure Electropure™ EDI modules and requires the O-015 controller. It features over-current and over-temperature protection.
5.0 kW
Power supplies
Output DC Voltage (Constant Voltage Mode): 0-600 VDC · Output DC Current (Has Overcurrent Protection): 0-8 Amps DC (ADC) · Maximum Power: 0-5kW
This is a 5.0 kW air-cooled, switch-mode DC power supply designed for SnowPure Electropure™ EDI modules. It features continuous operation at rated output, low AC ripple.
10 kW
Power supplies
Output DC Voltage (Constant Voltage Mode): 0-600 VDC · Output DC Current: 0-16 Amps DC (ADC) · Monitoring Output (Standard): 4-20mA
This 10 kW DC power supply is designed for SnowPure Electropure™ EDI modules. It offers an output voltage of 0-600 VDC and features over-current protection with a...
15 kW
Power supplies
Output DC Voltage (Constant Voltage Mode): 0-600 VDC · Output DC Current (Has Overcurrent Protection): 0-24 Amps DC · Power Efficiency Rating (@Full Load): > 94%
This 15 kW DC power supply is designed for SnowPure Electropure™ EDI modules and operates with a continuous output voltage of 0-600 VDC. It features over-current.
20 kW
Power supplies
Output DC Voltage (Constant Voltage Mode): 0-600 VDC · Output DC Current: 0-32 Amps DC (ADC) · Power Efficiency Rating (@Full Load): > 94%
This is a 20kW DC power supply designed for SnowPure's Electropure™ EDI modules. It is air-cooled and features over-current, short-circuit.
Brand Products & Technical Documents
20 product profiles with integrated document access
Each card keeps the curated model introduction and combines the readable datasheet page, OEM PDF, and official source. Product understanding and document access now share one card set.
EXL modules
4 product profiles
Electrodeionization (EDI)
Product profile
EXL-650
The SnowPure EXL-650 is an Electrodeionization (EDI) module designed for continuous water purification without upsets.
Electrodeionization (EDI)
Product profile
EXL-750
The SnowPure EXL-750 is an Electrodeionization (EDI) module designed for continuous, reliable water purification. It features patented Excellion membranes.
Electrodeionization (EDI)
Product profile
EXL-850
The SnowPure EXL-850 is an Electrodeionization (EDI) module designed for continuous water purification without hazardous waste or regeneration chemicals.
Electrodeionization (EDI)
Product profile
EXL-510-HTS
The EXL-510-HTS is an improved High Temperature Stable (HTS) Electropure™ Electrodeionization module suitable for pharmaceutical applications.
XL / lab modules
6 product profiles
Electrodeionization (EDI)
Product profile
XL-100-R
The SnowPure EDI XL-100-R is an industrial electrodeionization module designed for continuous water purification.
Electrodeionization (EDI)
Product profile
XL-060-RL
This SnowPure EDI module is part of the Zap-10-M or Zap-20-M series for producing ultrapure water.
Electrodeionization (EDI)
Product profile
XL-100-SR
The Electropure XL-SR is a Pharmaceutical Electrodeionization (EDI) module designed for high-purity water production.
Electrodeionization (EDI)
Product profile
XL-100-HTS
The XL-100-HTS is an Electrodeionization (EDI) module designed for water treatment applications.
Electrodeionization (EDI)
Product profile
XL-100-DER
The XL-100-DER is an Electrodeionization (EDI) module designed for purifying RO water in central kidney dialysis systems, removing endotoxins for improved results.
Electrodeionization (EDI)
Product profile
Zap-10M
This Zap-10M EDI module utilizes SnowPure's Electropure technology for high-purity laboratory water applications.
General Products
1 product profile
Electrodeionization (EDI)
Product profile
500 W
This is a 500W air-cooled DC power supply designed for SnowPure's Electropure™ EDI modules, specifically the XL-060 and XL-100 Series. It features over-current.
Power supplies
9 product profiles
Electrodeionization (EDI)
Product profile
1.0 kW
This 1.0 kW DC power supply provides constant voltage control for SnowPure Electropure™ EDI modules. It features air cooling, over-current and over-temperature protection.
Electrodeionization (EDI)
Product profile
1.5 kW
This 1.5 kW DC power supply by SnowPure is designed for use with Electropure™ EDI modules. It features over-current, short-circuit.
Electrodeionization (EDI)
Product profile
2.0 kW
This is a 2.0kW DC power supply designed for SnowPure EDI modules. It features constant voltage control, overcurrent protection, and a compact, air-cooled design.
Electrodeionization (EDI)
Product profile
3.0 kW
This 3.0 kW DC power supply is designed for SnowPure Electropure™ EDI modules and requires the O-015 controller. It features over-current and over-temperature protection.
Electrodeionization (EDI)
Product profile
5.0 kW
This is a 5.0 kW air-cooled, switch-mode DC power supply designed for SnowPure Electropure™ EDI modules. It features continuous operation at rated output, low AC ripple.
Electrodeionization (EDI)
Product profile
10 kW
This 10 kW DC power supply is designed for SnowPure Electropure™ EDI modules. It offers an output voltage of 0-600 VDC and features over-current protection with a...
Show remaining Power supplies profiles (3)
Electrodeionization (EDI)
Product profile
15 kW
This 15 kW DC power supply is designed for SnowPure Electropure™ EDI modules and operates with a continuous output voltage of 0-600 VDC. It features over-current.
Electrodeionization (EDI)
Product profile
20 kW
This is a 20kW DC power supply designed for SnowPure's Electropure™ EDI modules. It is air-cooled and features over-current, short-circuit.
Electrodeionization (EDI)
Product profile
25 kW
This 25 kW DC power supply is designed for SnowPure EDI modules, featuring switch-mode, air-cooled operation.