Valves
6 models in this family. Representative models: V132A Softener Body, V230A Softener Body, V240A Softener valve body.

International brand dossier
Pentair is a broad water equipment group whose water-treatment brands include control valves, softening components, filter housings and cartridges, pumps, membrane housings, and X-Flow membrane modules.
Pentair is a broad water equipment group whose water-treatment brands include control valves, softening components, filter housings and cartridges, pumps, membrane housings, and X-Flow membrane modules.
Its influence comes from installed-base breadth: many residential, commercial, industrial, and packaged water systems are designed around Pentair components, so selection often depends on service parts, controls, and compatibility as much as on the individual product rating.
Siata Control Valves's position in control valves is defined by product families such as Valves and Controllers.The portfolio is best understood inside softening, filtration, residential and commercial pretreatment, small plant automation, and packaged treatment trains, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include V132A Softener Body, V230A Softener Body and V240A Softener valve body.First-screening cues are valve size, flow capacity, regeneration logic, brine or tank fit, and spare-parts support.
8
Models and series
2
Product families
Quick Model Index
Search specifications and compare candidates with products from other brands in the same category.
Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.
Showing 8 of 8 models
Compare 2–4 compatible models across brands. Your shortlist is saved on this device.
V132A Softener Body
Valves
Flow rate: up to 7 m³/h · Hydrostatic Pressure: 22 bar · Working Pressure: 1.5 - 6 bar
The Siata V132 is a residential control valve designed for softening, demineralization, and filtration applications.
V230A Softener Body
Valves
Continuous Flow Rate (Δp = 1 bar): 8.5 m³/h · Peak Flow Rate (Δ p = 1.9 bar): 11 m³/h · Maximum Backwash Flow Rate (Δp = 1.9 bar): 4 m³/h
The Siata V230A is a hydraulically actuated control valve for water softeners, filters, and demineralization systems.
V240A Softener valve body
Valves
Flow Rate (Continuous, ∆p = 1 bar): 8.5 m³/h · Flow Rate (Peak, ∆p = 1.9 bar): 11.7 m³/h · Maximum Backwash Flow Rate (∆p = 1.9 bar): 4 m³/h
The Siata V240 is a side-mounted control valve designed for water softeners, demineralisation, dealkalisation, and filtration systems.
V250A Softener valve body
Valves
Flow Rate (Downflow Regeneration, continuous at ∆p = 1 bar): 21 m³/h · Flow Rate (Downflow Regeneration, peak at ∆p = 1.9 bar): 28.9 m³/h · Maximum Backwash Flow Rate (at ∆p = 1.9 bar): 12 m³/h
This Siata V250A is a water purification valve body designed for residential and commercial softening, demineralisation, and filtration systems.
V260A Softener valve body
Valves
Service Flow Rate (1 bar drop): 21 m³/h · Backwash Flow Rate: max 12 m³/h · Slow Rinse Flow Rate: 300 to 1000 lt/h
The Siata V260A is an automatic control valve for water softening, demineralization, and filtration systems.
V360A Softener valve body
Valves
Hydrostatic pressure: 22 bar · Working pressure: 2 to 6 bar · Up Flow regeneration: Yes
The Siata V360A is an industrial side-mounted control valve for water softening, demineralisation, and filtration applications.
SFE controller SFE Black twin pilots
Controllers
Operating temperature range: 2-43°C
The Siata SFE controller is an electronic control valve automation unit designed for water softening and filter applications.
Product range and selection
This section answers two questions: which main product families Siata offers, and which parameters to compare before choosing a specific model.
The main families shown on this page are Valves and Controllers. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.
After choosing a product family, compare service flow, regeneration logic, valve size, and controller function. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.
2 product families on this page.
Valves
6 models in this family. Representative models: V132A Softener Body, V230A Softener Body, V240A Softener valve body.
Controllers
2 models in this family. Representative models: SFE controller SFE Black twin pilots, SFE-EV PRO controller Duplex Std.
Brand Products & Technical Documents
View product applications, datasheets and family manuals.
6 product profiles
Product profile
The Siata V132 is a residential control valve designed for softening, demineralization, and filtration applications.
Product profile
The Siata V230A is a hydraulically actuated control valve for water softeners, filters, and demineralization systems.
Product profile
The Siata V240 is a side-mounted control valve designed for water softeners, demineralisation, dealkalisation, and filtration systems.
Product profile
This Siata V250A is a water purification valve body designed for residential and commercial softening, demineralisation, and filtration systems.
Product profile
The Siata V260A is an automatic control valve for water softening, demineralization, and filtration systems.
Product profile
The Siata V360A is an industrial side-mounted control valve for water softening, demineralisation, and filtration applications.
2 product profiles
Product profile
The Siata SFE controller is an electronic control valve automation unit designed for water softening and filter applications.
Product profile
The SFE-EV PRO controller is designed for residential and commercial water softening and filtration applications.