Quay lại Màng RO
Aquaporin logo

Hồ sơ thương hiệu quốc tế

Aquaporin-Inside Membranes

Aquaporin is a Danish biomimetic membrane company built around Aquaporin Inside technology, inspired by natural water-channel proteins.

Giới thiệu thương hiệu và danh mục sản phẩm

Aquaporin is a Danish biomimetic membrane company built around Aquaporin Inside technology, inspired by natural water-channel proteins.Its records are relevant where forward osmosis, specialty RO, low-energy separation, concentration of sensitive liquids, or biomimetic membrane differentiation are more important than commodity spiral-wound replacement.

Aquaporin-Inside Membranes's position in RO/NF membranes and related equipment is defined by product families such as RO, NF, UF-adjacent membrane elements, membrane contactors, pressure vessels, housings, and related separation products.

The portfolio is best understood inside brackish water, seawater desalination, ultrapure water, process separation, reuse, degassing, and membrane system packaging, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Aquaporin-Inside Clear Plus 4040, 4040 XL, Aquaporin-Inside Clear Plus 8040 and Aquaporin-Inside Clear Ultra 4040, 4040 XL.

13

Mẫu và dòng sản phẩm

1

Dòng sản phẩm

Danh mục mẫu

Tra cứu mẫu nhanh

13 mẫu và dòng sản phẩm

Tìm thông số và so sánh với sản phẩm của thương hiệu khác trong cùng danh mục.

Sản phẩm và tài liệu
Lọc theo khoảng giá trị

Lọc theo đơn vị hiển thị. Thông số thiếu, khoảng giá trị và điều kiện thử không được dùng làm giá trị đơn để lọc.

Hiển thị 13 trên 13 mẫu

So sánh 2–4 mẫu tương thích giữa các thương hiệu. Danh sách được lưu trên thiết bị này.

Tư vấn các mẫu đã chọn

Aquaporin-Inside Clear Plus 4040, 4040 XL

General Products

Typical rejection: 99.0% · Maximum feed flow rate: 3.6 m³/h (16 gpm) · Chênh áp tối đa: 0.7 bar (10 psi)

Aquaporin-Inside Clear Plus 4040, 4040 XL là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin-Inside Clear Plus 8040

General Products

Typical rejection: 99.0% · Permeate flow rate: 11,500 GPD · Maximum feed flow rate: 17 m³/h (75 gpm)

Aquaporin-Inside Clear Plus 8040 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin-Inside Clear Ultra 4040, 4040 XL

General Products

Typical rejection: 99.0% · Maximum feed flow rate: 3.6 m³/h (16 gpm) · Áp suất vận hành tối đa: 20.7 bar (300 psi)

Aquaporin-Inside Clear Ultra 4040, 4040 XL là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin-Inside Clear Ultra 8040

General Products

Typical rejection: 99.0% · Permeate flow rate: 15,000 GPD · Maximum feed flow rate: 17 m³/h (75 gpm)

Aquaporin-Inside Clear Ultra 8040 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin-Inside DWRO 1812-100

General Products

Minimum NaCl rejection: 96 % · Typical NaCl rejection: 98 % · Permeate flow rate: 100 GPD / 15.8 L/h

Aquaporin-Inside DWRO 1812-100 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin-Inside DWRO 1812-500

General Products

Minimum NaCl rejection: 96 % · Typical NaCl rejection: 98 % · Permeate flow rate: 150 GPD / 23.7 L/h

Aquaporin-Inside DWRO 1812-500 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin-Inside DWRO 3012-500

General Products

Minimum NaCl rejection: 95 % · Typical NaCl rejection: 97 % · Permeate flow rate: 500 GPD (79 L/h)

Aquaporin-Inside DWRO 3012-500 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin-Inside DWRO 4040

General Products

Typical rejection: 98.0% · Maximum feed flow rate: 3.6 m³/h (16 gpm) · Áp suất vận hành tối đa: 20.7 bar (300 psi)

Aquaporin-Inside DWRO 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin Inside Clear Classic 4040

General Products

Tỷ lệ loại bỏ muối ổn định: 99.5% · Permeate flow rate (GPD): 2,500 · Áp suất: 225 psi (15.5 bar)

Aquaporin Inside Clear Classic 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin Inside Clear Eco 4040

General Products

Tỷ lệ loại bỏ muối ổn định: 98.0% · Minimum rejection: 97.0% · Permeate flow rate (GPD): 2,800

Aquaporin Inside Clear Eco 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin Inside Clear Plus FR 4040

General Products

Tỷ lệ loại bỏ muối ổn định: 99.0% · Minimum rejection: 98.5% · Permeate flow rate (GPD): 1,800

Aquaporin Inside Clear Plus FR 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin Inside Clear Plus 4040

General Products

Tỷ lệ loại bỏ muối ổn định: 99.0% · Minimum rejection: 98.5% · Áp suất: 125 psi (8.6 bar)

Aquaporin Inside Clear Plus 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin Inside Clear Ultra 4040

General Products

Tỷ lệ loại bỏ muối ổn định: 99.0% · Minimum Rejection: 98.0% · Permeate Flow Rate (GPD): 2,600

Aquaporin Inside Clear Ultra 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Dòng sản phẩm và hướng dẫn lựa chọn

Dòng sản phẩm và hướng dẫn lựa chọn

Cách chọn Màng RO của Aquaporin-Inside

Phần này giải thích các dòng sản phẩm chính của Aquaporin-Inside và những thông số cần so sánh trước khi chọn mẫu cụ thể.

Bước 1: Chọn dòng sản phẩm theo ứng dụng

Các dòng chính trên trang gồm General Products. Chọn dòng phù hợp với mục tiêu xử lý, dạng thiết bị và điều kiện vận hành, sau đó dùng danh mục mẫu bên dưới để so sánh thông số.

Bước 2: Xác nhận mẫu bằng thông số chính

Sau khi chọn dòng sản phẩm, so sánh feed salinity, target salt rejection, Lưu lượng nước thấm, operating pressure, fouling tendency, element size and connection. Với dự án thay thế, kiểm tra điều kiện lắp đặt hoặc nạp vật liệu, kiểu kết nối và độ tương thích với hệ thống hiện hữu. Với dự án mới, xem xét phương thức vận hành, bảo trì và nguồn phụ tùng hoặc vật tư tiêu hao.

Tổng quan dòng sản phẩm

Trang này có 1 dòng sản phẩm.

General Products

13 models trong dòng này. Representative models: Aquaporin-Inside Clear Plus 4040, 4040 XL, Aquaporin-Inside Clear Plus 8040, Aquaporin-Inside Clear Ultra 4040, 4040 XL.

Giới thiệu sản phẩm và tài liệu

Sản phẩm và tài liệu kỹ thuật thương hiệu

13 mẫu và dòng sản phẩm

Xem ứng dụng, bảng dữ liệu và hướng dẫn dòng sản phẩm.

General Products

13 hồ sơ sản phẩm

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin-Inside Clear Plus 4040, 4040 XL

Aquaporin-Inside Clear Plus 4040, 4040 XL là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin-Inside Clear Plus 8040

Aquaporin-Inside Clear Plus 8040 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin-Inside Clear Ultra 4040, 4040 XL

Aquaporin-Inside Clear Ultra 4040, 4040 XL là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin-Inside Clear Ultra 8040

Aquaporin-Inside Clear Ultra 8040 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin-Inside DWRO 1812-100

Aquaporin-Inside DWRO 1812-100 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin-Inside DWRO 1812-500

Aquaporin-Inside DWRO 1812-500 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Xem các hồ sơ General Products còn lại (7)
RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin-Inside DWRO 3012-500

Aquaporin-Inside DWRO 3012-500 là phần tử màng thẩm thấu ngược, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin-Inside DWRO 4040

Aquaporin-Inside DWRO 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin Inside Clear Classic 4040

Aquaporin Inside Clear Classic 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin Inside Clear Eco 4040

Aquaporin Inside Clear Eco 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin Inside Clear Plus FR 4040

Aquaporin Inside Clear Plus FR 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin Inside Clear Plus 4040

Aquaporin Inside Clear Plus 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

RO
Aquaporin logo

Hồ sơ sản phẩm

Aquaporin Inside Clear Ultra 4040

Aquaporin Inside Clear Ultra 4040 là phần tử màng reverse-osmosis, lựa chọn theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Aquaporin-Inside Membranes Màng RO | Mẫu sản phẩm và bảng dữ liệu | AquaChain