Goulds Pumps

Flows: up to 14,800 m³/hr · Heads: up to 259 m · Pressure Pulsations: Designed for less than 1000 Pascals (0.0102 kilograms/cm²)

Goulds LP 3400 series are low pulse double suction pumps designed for headbox applications in paper machines.

Heads: to 1000 feet (305 m) · Temperatures: to 350°F (177°C) · Pressures: to 550 PSIG (3792 kPa)

The Goulds 3316 is a two-stage, horizontally split case pump designed for applications such as boiler feed, mine de-watering, and booster services.

Heads: to 1640 feet (500 m) · Temperatures: to 280° F (140° C) · Pressures: to 800 psig (55 bar)

The Goulds 3355 is a multistage process pump designed for high-pressure services, offering capacities up to 1500 GPM and heads up to 1640 feet.

Flow: up to 700 GPM · Head (TDH): up to 1150 ft · Power supply: Three-phase and single-phase 50 and 60 Hz

Goulds e-SV pumps are stainless steel vertical multi-stage units designed for applications like water supply, treatment, and HVAC.

Head: Up to 1200 feet · Maximum Head (2-pole): Ranges from 570 Ft (125SV) to 1210 Ft (46SV) · Nominal Speed: 3500 RPM

The Goulds e-SV Series is a line of vertical multi-stage centrifugal pumps designed for handling water and moderately aggressive liquids.

Duplex/super duplex materials: 1480 psig · 12% chrome materials: 1687 psig · Suction Pressure: All configurations: 350 psig

The Goulds 3393 is a high-pressure, multistage ring section pump designed for applications like reverse osmosis, boiler feed, and pressure boosting. It features a modular.

Heads: to 570 feet (174 m) · Maximum Liquid Temperature without cooling: 250°F (121°C) · Maximum Liquid Temperature with cooling: 350°F (177°C)

The Goulds 3410 is a double suction pump designed for a variety of industrial, municipal, and marine services.

Heads: to 850 feet (259 m) · Power Generation: Cooling Tower, Component Cooling, Service Water, Ash Sluicing, Heater Drain · Material Flexibility: Available in a wide variety of metals from cast iron to stainless steels

The Goulds 3409 is a medium capacity, single stage, double suction pump designed for industrial, marine, and power generation services.

Heads: to 400 feet TDH (122 m) · Temperatures: to 275˚F (135˚C) · Working pressures: to 200 PSI (1379 kPa)

The Goulds 3420 is a large capacity double suction centrifugal pump designed for heavy-duty industrial, municipal, and process services.

Heads: to 9,000 feet (2740 m) · Temperatures: to 400° F (205° C) · Pressures: to 4,000 PSIG (275 bar)

The Goulds 3600 is a heavy-duty, API 610 compliant, axially split, multistage pump for high-head and high-capacity industrial services.

Total Dynamic Head: to 700 feet (215 m) · Capacity: to 50,000 GPM (11355 m³/h) · Temperature: to 300° F (150°C), with an optional rating of 400° F (205° C)

The Goulds 3610 is an API 610 BB1 axially-split, between-bearing pump designed for reliability and up to 50,000 GPM capacity.

Total Dynamic Head: Up to 1,500 feet (455 m) · Materials: Available in a wide range of materials, including all API 610 constructions and custom application needs · Power Plant: Boiler feed booster, boiler circulation, ash sluice

The Goulds 3620 is an API 610 BB2 single-stage, between-bearing process pump designed for heavy-duty refining, petrochemical, and general industrial applications.

Total Dynamic Head: Up to 2,500 feet (760 m) · Materials: Available in a wide range of materials, including all API 610 constructions and custom application needs · Capacity: Up to 7,500 GPM (1700 m³/h)

The Goulds 3640 is a two-stage, between-bearing, radially split process pump designed to meet API 610 standards for demanding industrial applications.

Total Dynamic Head: Up to 9,000 feet (2740 m) · Operating Speeds: Up to 6,000 RPM · Impeller Arrangement: In-line diffuser type design. Key driven and shrink fit impellers are secured against axial movement in both directions

The Goulds 7200 CB is an API 610 BB5 barrel multistage pump designed for high temperature, high pressure, and critical services. It features a pull-out cartridge assembly.

Power: Nuclear service, cooling water (main and intermediate circulation, blow-downs), condensate extraction with fluctuating loads, and heater drain for tight controls

Goulds VIDS are double suction vertical pumps designed for low-NPSH performance in challenging applications like mining and oil/gas.

Heads: to 350 feet (107 m) · Temperatures: to 450°F (232° C) · Pressures: to 285 PSIG (1965 kPa)

The Goulds 3175 is a heavy-duty Paper Stock/Process Pump designed for demanding applications across various industries. It features a patented condition monitor.

Heads: to 410 feet (125 m) · Temperatures: to 446° F (230° C) · Pressures: to 232 PSIG (16 bar)

The Goulds 3180 is a heavy-duty process pump designed for demanding applications like paper stock.

Heads: to 410 feet (125 m) · Temperatures: to 508˚F (300˚C) · Pressures: to 360 PSIG (25 bar)

The Goulds 3181 is a high-temperature and pressure end suction paper stock and process pump designed for demanding services in the pulp and paper industry.

Heads: to 125 m (410 feet) · Temperatures: to 230° C (446° F) · Pressures: to 16 bar (232 PSIG)

The Goulds 3185 is a heavy-duty process pump designed for demanding applications like paper stock, slurries, and difficult recycle services.

Heads: to 125 m (410 feet) · Temperatures: to 300˚C (508˚F) · Pressures: to 25 bar (360 PSIG)

The Goulds 3186 is a series of high-temperature/pressure pumps engineered for paper stock and various process applications within the Pulp & Paper Industries.

Heads: to 925 feet (282 m) · Temperatures: to 700° F (371° C) · Pressures: to 450 PSIG (3102 kPa)

The Goulds LF 3196 i-FRAME is a low-flow ANSI process pump designed for chemical industries with patented intelligent monitoring.

Heads: to 620 ft (189 m) · Temperatures: to 535°F (280°C) · Pressures: to 275 PSIG

The Goulds 3296 EZMAG is a sealless chemical process pump designed for reliability and ease of maintenance, available in frame-mounted and close-coupled configurations.

Temperatures: to 250° F (121° C) · Efficiency: Equivalent to sealed ANSI pumps, 30% higher than metal sealless pumps · ANSI Dimensional: Allows easy retrofit of problem ANSI pumps

The Goulds 3298 is a sealless chemical process pump available in close-coupled, self-priming, vertical in-line, and compact XS configurations for handling corrosives.

Heads: to 490 feet (149 m) · Temperatures: to 360°F (182°C) · Pressures: to 275 PSIG (1896 kPa)

The Goulds 3299 is a heavy-duty, sealless lined chemical pump designed for a wide range of high temperature and pressure services.

Selection cues: flow · head · power and wetted-part materials

This Goulds 3655 is a single-stage, end-suction centrifugal pump featuring an enclosed impeller and close-coupled design.

Total Dynamic Head: Up to 1,200 feet (360 m) · Capacity: Up to 8,500 GPM (1930 m³/h) · Temperature: Up to 800˚ F (425˚ C)

The Goulds 3700 is an API 610 OH2 single-stage, overhung process pump designed for demanding industrial services. It offers a wide range of material options.

Heads: Up to 430 feet (131 m) · i-FRAME Power End: Designed for reliability and extended pump life, backed with a 5-year warranty · Temperatures: Up to 500° F (260° C)

The Goulds 3796 i-FRAME is a line of self-priming process pumps designed for chemical process industries with a one-piece casing, integral priming.

Heads: Up to 750 feet (230 m) · Temperatures: Up to 650˚F (340˚C) · Pressures: From full vacuum to 600 PSIG (42 bar)

The Goulds 3910 is an API-610 OH3 vertical in-line process pump designed for high-temperature and high-pressure applications in industries like pulp & paper and...

Heads: to 700 feet (213 m) · Temperatures: to 500° F (260° C) · Pressures: to 375 PSIG (2586 kPa)

The Goulds 3996 is an in-line process pump designed for chemical process industries, featuring back pull-out design and external impeller adjustment for maintenance ease...

Power Utility: Ash Slurries, Lime Slurries · Pressures: to 500 PSIG (3,448 kPa) · Stuffing Box Connections: Standard for either "full flush" or "low dilution."

The Goulds 5500 is a severe duty slurry pump engineered for demanding services, with a High Pressure variant available for tough stage or series pumping.

Heads: to 30 feet (9.2 m) · Temperatures: to 350° F (176°C)

Goulds AF Axial Flow Pumps are designed for high-capacity, low-head applications in chemical, mining, petrochemical, pulp and paper, and municipal services.

Centerlines-mounted casing option for high temperature services: 500˚ to 700˚ F (260˚ to 370˚C) · Bearing Protection: INPRO VBXX-D Hybrid Bearing Isolators with stainless steel rotors prevent lubricant contamination. These seals are non-contacting and do not wear · Dimensions and Weights: See the official PDF for exact tabulated values for pump sizes, discharge/suction sizes, bare pump weights, and dimensional measurements (X, A, B, D, SP)

The Goulds CV 3196 i-FRAME is an ANSI Standard Dimension Process Pump designed for corrosives, abrasives, and liquids containing solids.

Bearing Protection: Utilizes Taconite with a grease barrier for maximum protection · Dimensions: All dimensions are provided in inches and millimeters

Goulds CW/CWX are horizontal, single-stage, enclosed-impeller pumps designed for abrasive slurries.

Heads to: 140 feet (43 m) · Temperatures to: 200°F (93°C) · Pressure to: 100 PSIG (690 kPa)

The Goulds HS Horizontal Hydro-Solids Pump is a recessed impeller centrifugal pump designed to prevent clogging when handling large solids, air, and fibrous materials.

Heads: to 925 ft (282m) · Temperatures: up to 700°F (372°C) · Pressures: up to 450 Psig (3,102 kPa)

The Goulds HT 3196 i-FRAME is a high-temperature process pump designed for demanding applications up to 700°F and 4,500 GPM. It features a centerline-mounted casing.

Flows: Up to 450 m³/h (1980 GPM) · Temperatures: From -40°C to 280°C (-40°F to 530°F) · High Temperature Option: Includes Samarium Cobalt magnets and a special High Temperature bearing cartridge for applications between 180°C and 280°C

The Goulds IC Series are ISO chemical process pumps available in four configurations for diverse industrial applications.

Heads: To 118 feet · Phase: 1 or 3 · Maximum working pressure: 125 PSI

The Goulds BF 3642/3742 series are close-coupled and frame-mounted centrifugal pumps designed for water circulation, booster service, and general purpose pumping.

Primary Materials of Construction: Ductile Iron, 316 Stainless Steel, Duplex SS, Alloy 20, Hastelloy, and Titanium · Temperature Range: -40°C to 180°C (-40°F to 360°F) · Can Operating Pressure: Rated for 25 bar (360 psi)

The Goulds ICM/ICMB is an ISO dimensional magnetic drive centrifugal process pump designed for chemical applications. It features a sealless design with Hastelloy C4 cans.

Heads: to 150 m (492 Ft) · Temperature Range: -40°C to 280°C (-40°F to 535°F) · Pressures: to 25 bar (363 Psig)

The Goulds ICP is a heavy-duty chemical process pump designed for extreme temperatures and pressures. It features a center-line mounted casing.

Heads: Up to 240 feet (73 m) · Temperatures: Up to 250° F (121° C) · Pressures: Up to 127 psig (876 kPa)

The Goulds JC Slurry Pump is designed for abrasive and corrosive slurries with capacities up to 7,000 GPM. It features extra-thick wet end components.

Selection cues: flow · head · power and wetted-part materials

Goulds SRL pumps are severe duty slurry pumps designed for abrasive and corrosive applications, available with open, closed.

Heads: to 140 feet (43 m) · Heavy Duty Power End: Provides rigid shaft support and ample oil volume for cooler running bearings and extended life · Temperatures: to 225°F (107°C)

The Goulds Trash Hog is a self-priming solids handling pump designed for superior solids handling capability and ease of maintenance in various industrial and municipal...

Discharge Head: Patented “O” Head design provides consistent flow and eliminates potential resonance frequencies through a comprehensive Finite Element Analysis · Critical Speed Analysis: Ensures the first critical speed is well above the maximum operating speed of the pump · Upper Bearing Support: Option for an extra length or double bearing above the first stage impeller for added stability

The Goulds VCW is a large vertical circulating water pump designed for demanding applications in power generation, desalination, and industrial services.

Heads to: 85 m (280 feet) · Power: Absorber Recycle, Gas Cooling, Filter Feed, Lime and Ash Slurries · Pressures to: 17 bar (250 PSIG)

The Goulds XHD are extra heavy-duty lined slurry pumps designed for severe-duty applications and are available in rubber or metal-lined configurations.

Flow: to 295 m³/h (1,300 USgpm) · Head: to 27 m (90 feet) · Temperature Range: 90°C (194°F) for all models

Goulds HSU, HSUL, and JCU submersible pumps are designed for handling solids in various industrial and waste treatment applications.

Flows: to 70,000 GPM (15,900 m³/Hr) · Heads: to 3,500 feet (1,060 m) · Horsepower: to 5,000 HP (3,730 KW)

The Goulds VIS is a vertical industrial submersible pump designed for demanding Oil & Gas applications.

Heads: to 525 feet (160 m) · Temperatures: to 450° F (232° C) · Motor Support: A48 Cast iron

The Goulds API 3171 is an API 610 VS4 vertical sump pump designed for process applications with capacities up to 3180 GPM.

Selection cues: flow · head · power and wetted-part materials

The Goulds 5150 / VJC is a vertical cantilever bottom suction pump designed for various industrial applications.

Motor Support: A48 Cast iron · Support Plate: Carbon steel

The Goulds API 3171 is an API 610 Compliant VS4 vertical sump pump designed for demanding applications.

Temperatures: to 450° F (232° C) · Pump Weight (2 Foot Depth) Less Motor: Varies by model, from 275 Lb (125 kg) to 910 Lb (414 kg) · Weight—Add to Each 6" of Length: Varies by model, from 13 Lb (6 kg) to 40 Lb (18 kg)

The Goulds 3171 and CV 3171 are vertical sump and process pumps designed for a wide range of industrial services.

Heads: Up to 300 feet (92 m) · Temperatures: Up to 200° F (79° C)

The Goulds Model NM 3171 is a non-metallic vertical process pump designed for severe corrosive services and can handle capacities up to 1250 GPM.

Heads: to 140 feet (42.6 m) · Materials of Construction: Available in a wide range of corrosive/abrasive resistant alloys · Temperatures: to 200°F (93°C)

The Goulds VHS is a vertical cantilever pump with a recessed impeller designed for handling large or fibrous solids in applications like sewage treatment and ash slurry.

Flows: Up to 70,000 GPM (15,900 m³/Hr) · Heads: Up to 2,000 feet (610 m) · Horsepower: Up to 10,000 HP (7,460 kW)

The Goulds VIC is a vertical industrial can-type pump designed for a wide range of demanding services, including pipeline boosting and chemical transfer.

Selection cues: flow · head · power and wetted-part materials

This is a Goulds VMP Autoprime Pump, designed for general pumping applications. ATEX conformance requires the pump unit to be operated within its intended use and...

Flows: to 1,500 GPM (341 m³/h) · Heads: to 120 feet (37 m) · Pressures: to 75 psi (517 kPa)

Goulds VRS Vertical Rubber-Lined Cantilever Pumps are designed for abrasive slurry services in industries like mining and pulp and paper.

Flows: to 13 600 m³/h (60 000 gpm) · Heads: to 700 m (2300 ft) · Pressures: to 100 bar (1450 psi)

Goulds VTP is a vertical turbine pump for wet-pit or deep well applications, available in single or multiple stages.

Temperature: 250°F

The Goulds ChemBase Plus is a polymer concrete baseplate designed for pump applications, offering superior chemical and corrosion resistance up to 250°F.

High Temperature Service: Up to 260°C (500°F)

This is a selector for Goulds Pumps, offering a wide range of pump types for diverse industrial services including chemical processing, solids handling.