Quay lại Bơm và hệ thống bơm
Ebara logo

Hồ sơ thương hiệu quốc tế

Ebara Pumps

Ebara is a Japanese pump group with pump manufacturing roots going back to 1912.

Giới thiệu thương hiệu và danh mục sản phẩm

Ebara is a Japanese pump group with pump manufacturing roots going back to 1912.In water-treatment projects it is relevant for transfer, pressure boosting, drainage, wastewater, and industrial fluid handling, especially where stainless construction, compact pump packages, and broad global manufacturing experience are useful.

Ebara Pumps's position in pumps and pumping equipment is defined by product families such as Centrifugal Pumps, In-line Centrifugal Pumps, Horizontal Multistage Centrifugal Pumps and Vertical Multistage Centrifugal Pump.

The portfolio is best understood inside raw water intake, RO/NF feed, transfer, boosting, chemical dosing, wastewater lift, and desalination hydraulics, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include 2CDX / 2CDXM, 3DS and 3D4 / 3DS4.Selection should focus on flow, head, efficiency, NPSH margin, wetted materials, seals, and drive arrangement.

49

Mẫu và dòng sản phẩm

12

Dòng sản phẩm

Danh mục mẫu

Tra cứu mẫu nhanh

49 mẫu và dòng sản phẩm

Tìm thông số và so sánh với sản phẩm của thương hiệu khác trong cùng danh mục.

Sản phẩm và tài liệu
Lọc theo khoảng giá trị

Lọc theo đơn vị hiển thị. Thông số thiếu, khoảng giá trị và điều kiện thử không được dùng làm giá trị đơn để lọc.

Hiển thị 49 trên 49 mẫu

So sánh 2–4 mẫu tương thích giữa các thương hiệu. Danh sách được lưu trên thiết bị này.

Tư vấn các mẫu đã chọn

2CDX / 2CDXM

Centrifugal Pumps

Minimum flow rate: Pumps should not be used at a flow rate below 10% of best efficiency point to avoid the risk of over-heating · Rotation speed: ≈ 2800 min⁻¹ · Casing material: Aluminium

2CDX / 2CDXM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

3DS

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Cột áp: Dimensions (Size, d, d1, d2, d3, M, L, L1, b, h, Set screw) are tabulated per pump model. See the official PDF for exact tabulated values · Casing Material: Aluminium

3DS là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

3D4 / 3DS4

Centrifugal Pumps

Power Rating: 0.25 ÷ 3 kW (0.33 ÷ 4 HP) · Công suất điện: IM B5 (up to 1.5 kW), IM B35 (2.2 kW and above) · Rotation Speed: ≈1400 min⁻¹

3D4 / 3DS4 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

3M / 3S / 3LM / 3LMZ / 3LS / 3LSZ / 3LP / 3D / 3DP

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Rotation Speed: ≈ 2900 min⁻¹ · Motor Casing Material: Aluminium

3M / 3S / 3LM / 3LMZ / 3LS / 3LSZ / 3LP / 3D / 3DP là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

3DS / 3M4 / 3S4 / 3P4 / 3LM4 / 3LS4 / 3LP4

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Power Rating: 0.25 ÷ 7.5 kW (0.33 ÷ 10 HP) · Rotation Speed: ≈ 1400 min⁻¹

3DS / 3M4 / 3S4 / 3P4 / 3LM4 / 3LS4 / 3LP4 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

3SF4 / 3LSF4 / 3PF4 / 3LPF4

Centrifugal Pumps

Vật liệu: EPDM for standard version, FPM for L version · Maximum working pressure: 1 MPa

3SF4 / 3LSF4 / 3PF4 / 3LPF4 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

3SF / 3PF

Centrifugal Pumps

Rotation speed: Approximately 2900 min⁻¹ · Motor Power: Available in kW and HP ratings for each pump type. See the official PDF for exact tabulated values in the selection charts and performance curves · Maximum working pressure: 1 MPa / 10 bar

3SF / 3PF là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

AGA

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of best efficiency point to avoid the risk of over-heating · Rotation Speed: ≈3450 min⁻¹ · Motor Casing Material: Aluminium

AGA là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

AGA-AGC

Centrifugal Pumps

Motor Casing material: Aluminium · Base material / Motor support: Plastic foot / Cast iron · Protection degree (CEI EN 60034-5): IP 44

AGA-AGC là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

CD / CDM

Centrifugal Pumps

Rotation Speed: ≈2800 min⁻¹ · Casing Material: EN 1.4301 (AISI 304) · Base Material/Motor Support: EN 1.4301 (AISI 304)

CD / CDM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

CDA

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of best efficiency point to avoid overheating · Motor Casing Material: Aluminium · Base Material / Motor Support: Cast iron / Plastic foot

CDA là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

CDX / CDXM

Centrifugal Pumps

Rotation Speed: ≈2800 min⁻¹ · Motor Casing Material: Aluminium · Motor Support Material: Aluminium

CDX / CDXM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

CMA / CMB / CMC / CMD

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Base Material / Motor Support: Aluminium / Cast iron / Plastic foot · Kinematic Viscosity (for performance curves): ν = 1 mm²/s (1 cSt) at 20 °C

CMA / CMB / CMC / CMD là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

CMR

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of best efficiency point to avoid overheating · Rotation Speed: ≈ 2800 min⁻¹ · Motor Casing Material: Aluminium

CMR là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

ENR

Centrifugal Pumps

Power rating: 0.75 ÷ 110 kW (1 ÷ 150 HP) · Rotation speed: ≈2900 min⁻¹ · Casing material: Cast Iron

ENR là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

DWC / DWO

Centrifugal Pumps

Power Rating: 1.1 ÷ 3.0 kW (1.5 ÷ 4.0 HP) · Rotation Speed: ≈2800 min⁻¹ · Motor Casing Material: Aluminium

DWC / DWO là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

JE / JEM

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Power Rating: 0.6 ÷ 1.1 kW (0.8 ÷ 1.5 HP) · Rotation Speed: ≈ 2800 min⁻¹

JE / JEM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

JES / JESM

Centrifugal Pumps

Minimum flow rate: Pumps should not be used at a flow rate below 10% of best efficiency point to avoid overheating · Power rating: 0.37 ÷ 0.6 kW (0.5 ÷ 0.8 HP) · Rotation speed: ≈ 3000 min⁻¹

JES / JESM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

JESX / JESXM

Centrifugal Pumps

Rotation Speed: ≈ 2800 min⁻¹ · Liquid Temperature: min. +5 °C to max. +45 °C · Maximum Working Pressure: 0.6 MPa

JESX / JESXM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

JEX / JEXM

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Power Rating: 0.6 ÷ 1.1 kW (0.8 ÷ 1.5 HP) · Rotation Speed: ≈ 3450 min⁻¹

JEX / JEXM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

LPC

Centrifugal Pumps

Power Rating: 0.37 ÷ 37 kW (0.5 ÷ 50 HP) · Rotation Speed: ≈ 2900 min⁻¹ · Frequency: 50 Hz

LPC là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

LPC4

Centrifugal Pumps

Power Rating: 0.25 ÷ 15 kW (0.33 ÷ 20 HP) · Rotation Speed: ≈1400 min⁻¹ · Motor Casing Material: Aluminium

LPC4 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

LPCD

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Power Rating: 0.75 ÷ 15 kW (1 ÷ 20 HP) · Rotation Speed: ≈ 2900 min⁻¹

LPCD là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

LPCD4

Centrifugal Pumps

Power Rating: 0.25 ÷ 4 kW (0.33 ÷ 5.5 HP) · Rotation Speed: ≈ 1400 min⁻¹ · Motor Casing Material: Aluminum

LPCD4 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

MD

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Power Rating: 5.5 ÷ 22 kW (7.5 ÷ 30 HP) · Rotation Speed: ≈2900 min⁻¹

MD là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

MMD

Centrifugal Pumps

Power rating: 22 ÷ 37 kW (30 ÷ 50 HP) · Rotation speed: ≈2900 min⁻¹ · Maximum working pressure: 1 MPa

MMD là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

MMD4

Centrifugal Pumps

Power rating: 1.1 ÷ 22 kW (1.5 ÷ 30 HP) · Rotation speed: ≈1400 min⁻¹ · Nhiệt độ: Min. -10 °C, max +90 °C

MMD4 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Multigo

Centrifugal Pumps

Maximum Available Negative Suction Head: -6 m · Rotation Speed: ≈ 3450 min⁻¹ · Motor Casing Material: AISI 304

Multigo là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

PRA

Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid the risk of overheating · Power Rating: 0.37 ÷ 1.5 kW (0.5 ÷ 2 HP) · Rotation Speed: ≈ 2850 min⁻¹

PRA là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

LPS

In-line Centrifugal Pumps

Power Rating: 0.08 ÷ 1.5 kW (0.1 ÷ 2 HP) · Rotation Speed: ≈ 2800 min⁻¹ · Operating Frequency: 50 Hz

LPS là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Compact A /AM / B / BM

Horizontal Multistage Centrifugal Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Power rating: 0.3 ÷ 1.1 kW (0.4 ÷ 1.5 HP) · Rotation speed: ≈ 3400 min⁻¹

Compact A /AM / B / BM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Matrix

Horizontal Multistage Centrifugal Pumps

Rotation speed: ≈ 2850 min⁻¹ · Casing material: Aluminium · Base material / Motor support: Aluminium

Matrix là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

CVM A / AM / B / BM

Vertical Multistage Centrifugal Pump

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid the risk of overheating · Casing Material: Aluminium · Liquid Temperature: min. +5 °C, max. +40 °C

CVM A / AM / B / BM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

EVM / EVMG / EVML / EVMS / EVMSL / EVMSL3 / EVMSL5 / EVMSL10 / EVMSL15 / EVMSL20 / EVMSG1 / EVMSG3 / EVMSG5 / EVMSG10 / EVMSG15 / EVMSG20

Vertical Multistage Centrifugal Pump

Rotation speed: ~ 2900 min⁻¹ · Casing Material: Aluminium · Áp suất vận hành tối đa: 16 bar (1.6 MPa) or 25 bar (2.5 MPa)

EVM / EVMG / EVML / EVMS / EVMSL / EVMSL3 / EVMSL5 / EVMSL10 / EVMSL15 / EVMSL20 / EVMSG1 / EVMSG3 / EVMSG5 / EVMSG10 / EVMSG15 / EVMSG20 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

4WYM / 4WYT

Submersible Motors

Minimum cooling flow rate: 0,08 m/sec · Maximum voltage variation from nominal: +6% / -10% · Maximum ambient temperature: 35°

4WYM / 4WYT là nhựa trao đổi ion xử lý nước, cần so sánh theo loại nhựa, ion mục tiêu, cách tái sinh và yêu cầu nước sau xử lý.

3OYM / 3OYT

Oil Filled Submersible Pumps

Single phase version power range: from 0,37 kW up to 0,75 kW · Three phase version power range: from 0,37 kW up to 1,1 kW · Shaft output material: AISI 303

3OYM / 3OYT là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

4OYM / 4OYT

Oil Filled Submersible Pumps

Optional upper bracket materials: Printed brass alloy, microcast stainless steel AISI 304/316 · Maximum voltage variation from nominal: ±10% · Maximum ambient temperature: 35°C with minimum cooling flow rate 0.08 m/sec

4OYM / 4OYT là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

6OYM / 6OYT

Oil Filled Submersible Pumps

Minimum cooling flow rate: 0.16 m/sec · Maximum voltage variation from nominal: ±10% · Maximum ambient temperature: 35°C

6OYM / 6OYT là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

4BHS2 / 4BHS4 / 4BHS7 / 4BHS15

Submersible Multistage Pumps

Minimum flow rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid the risk of overheating · Rated speed: Approximately 2850 min⁻¹ (2 poles) · Maximum liquid temperature: 30 °C

4BHS2 / 4BHS4 / 4BHS7 / 4BHS15 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

4BHS/A

Submersible Multistage Pumps

Minimum flow rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Rated speed: Refer to each characteristic performance rotation speed as rated speed (approx. 3450 min⁻¹) · Motor casing material: EN 1.4301 (AISI 304)

4BHS/A là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

4WN1 / 4WN2 / 4WN3 / 4WN4 / 4WN5 / 4WN6 / 4WN8 / 4WN10 / 4WN12 / 4WN15

Submersible Multistage Pumps

Minimum flow rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid the risk of overheating · Discharge Head: EN 1.4308 (ASTM CF8) · Rated speed: Refer to each characteristic performance as rated speed (Performance curves indicate ≈ 2850 min⁻¹)

4WN1 / 4WN2 / 4WN3 / 4WN4 / 4WN5 / 4WN6 / 4WN8 / 4WN10 / 4WN12 / 4WN15 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

SB

Submersible Multistage Pumps

Power Cable: EPDM/Cross Seald Polyethylene, 4x1.5 mm², L=1.75 m · Rated Speed: ≈ 2800 min⁻¹ · Liquid Temperature: Maximum 30 °C

SB là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

SF6

Submersible Multistage Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid overheating · Motor Casing Material: AISI 304 (EN 1.4301) · Nhiệt độ: max. +30 °C

SF6 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

6BHE / 86BHE

Submersible Deepwell Pumps

Minimum flow rate: Pumps should not be used at a flow rate below 10% of best efficiency point to avoid the risk of overheating · Motor Casing material: EN 1.4301 (AISI 304) · Rotation speed: Refer to each characteristic performance rotation speed at rated speed

6BHE / 86BHE là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

40DSF / 50DS / 65DS / 80DS / 100DS / 50DV / 65DV / 65DL / 80DL / 100DL / 150DL / 200DL / 250DL / 300DL / 80DML / 100DML / 150DML / 50DMLF / 80DMLV / 100DMLV

Submersible Pumps

Cable material: H07RN-F or Neoprene H07RN/F · Max Temperature: 40°C (or <40°C for some models) · Frequency: 50 ±1% or 50 -5/+3 %

40DSF / 50DS / 65DS / 80DS / 100DS / 50DV / 65DV / 65DL / 80DL / 100DL / 150DL / 200DL / 250DL / 300DL / 80DML / 100DML / 150DML / 50DMLF / 80DMLV / 100DMLV là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

DW / DW VOX / DWF / DW VOXF / DWFZ / DW VOXFZ

Submersible Sewage Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of the best efficiency point to avoid the risk of overheating · Power Cable Length: 10 m · Rotation Speed: ≈ 2800 min⁻¹

DW / DW VOX / DWF / DW VOXF / DWFZ / DW VOXFZ là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Right

Submersible Sewage Pumps

Minimum Flow Rate: Pumps should not be used at a flow rate below 10% of best efficiency point to avoid overheating · Min Head: 2 m (at 240 l/min) · Power Cable Length: 5 m (for internal usage only); 10 m

Right là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

GS 2

Standardised End Suction Pumps

Heads: To 150 m (50Hz) · Motor Power: from 0,75 up to 355 kW · Rotation Speed: 1450 min⁻¹ or 2900 min⁻¹

GS 2 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

2GP(E) Matrix

Booster Sets

Maximum pump power: 2.2 kW (MT), 4 kW (TT) · Power Voltage: Three-phase 400 V · Pump power: From 1.5kW up to 30kW

2GP(E) Matrix là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Dòng sản phẩm và hướng dẫn lựa chọn

Dòng sản phẩm và hướng dẫn lựa chọn

Cách chọn Bơm và hệ thống bơm của Ebara

Phần này giải thích các dòng sản phẩm chính của Ebara và những thông số cần so sánh trước khi chọn mẫu cụ thể.

Bước 1: Chọn dòng sản phẩm theo ứng dụng

Các dòng chính trên trang gồm Centrifugal Pumps, In-line Centrifugal Pumps, Horizontal Multistage Centrifugal Pumps, Vertical Multistage Centrifugal Pump. Chọn dòng phù hợp với mục tiêu xử lý, dạng thiết bị và điều kiện vận hành, sau đó dùng danh mục mẫu bên dưới để so sánh thông số.

Bước 2: Xác nhận mẫu bằng thông số chính

Sau khi chọn dòng sản phẩm, so sánh flow and head, materials, efficiency, duty cycle. Với dự án thay thế, kiểm tra điều kiện lắp đặt hoặc nạp vật liệu, kiểu kết nối và độ tương thích với hệ thống hiện hữu. Với dự án mới, xem xét phương thức vận hành, bảo trì và nguồn phụ tùng hoặc vật tư tiêu hao.

Tổng quan dòng sản phẩm

Hiển thị 6 dòng chính; xem đầy đủ 12 dòng trong danh mục mẫu bên dưới.

Centrifugal Pumps

29 models trong dòng này. Representative models: 2CDX / 2CDXM, 3DS, 3D4 / 3DS4.

In-line Centrifugal Pumps

1 model trong dòng này. Representative models: LPS.

Horizontal Multistage Centrifugal Pumps

2 models trong dòng này. Representative models: Compact A /AM / B / BM, Matrix.

Vertical Multistage Centrifugal Pump

2 models trong dòng này. Representative models: CVM A / AM / B / BM, EVM / EVMG / EVML / EVMS / EVMSL / EVMSL3 / EVMSL5 / EVMSL10 / EVMSL15 / EVMSL20 / EVMSG1 / EVMSG3 / EVMSG5 / EVMSG10 / EVMSG15 / EVMSG20.

Submersible Motors

1 model trong dòng này. Representative models: 4WYM / 4WYT.

Oil Filled Submersible Pumps

3 models trong dòng này. Representative models: 3OYM / 3OYT, 4OYM / 4OYT, 6OYM / 6OYT.

Giới thiệu sản phẩm và tài liệu

Sản phẩm và tài liệu kỹ thuật thương hiệu

49 mẫu và dòng sản phẩm

Xem ứng dụng, bảng dữ liệu và hướng dẫn dòng sản phẩm.

Centrifugal Pumps

29 hồ sơ sản phẩm

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

3M / 3S / 3LM / 3LMZ / 3LS / 3LSZ / 3LP / 3D / 3DP

3M / 3S / 3LM / 3LMZ / 3LS / 3LSZ / 3LP / 3D / 3DP là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

3DS / 3M4 / 3S4 / 3P4 / 3LM4 / 3LS4 / 3LP4

3DS / 3M4 / 3S4 / 3P4 / 3LM4 / 3LS4 / 3LP4 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

3SF4 / 3LSF4 / 3PF4 / 3LPF4

3SF4 / 3LSF4 / 3PF4 / 3LPF4 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Xem các hồ sơ Centrifugal Pumps còn lại (23)
Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

CMA / CMB / CMC / CMD

CMA / CMB / CMC / CMD là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

In-line Centrifugal Pumps

1 hồ sơ sản phẩm

Horizontal Multistage Centrifugal Pumps

2 hồ sơ sản phẩm

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

Compact A /AM / B / BM

Compact A /AM / B / BM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Vertical Multistage Centrifugal Pump

2 hồ sơ sản phẩm

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

CVM A / AM / B / BM

CVM A / AM / B / BM là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

EVM / EVMG / EVML / EVMS / EVMSL / EVMSL3 / EVMSL5 / EVMSL10 / EVMSL15 / EVMSL20 / EVMSG1 / EVMSG3 / EVMSG5 / EVMSG10 / EVMSG15 / EVMSG20

EVM / EVMG / EVML / EVMS / EVMSL / EVMSL3 / EVMSL5 / EVMSL10 / EVMSL15 / EVMSL20 / EVMSG1 / EVMSG3 / EVMSG5 / EVMSG10 / EVMSG15 / EVMSG20 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Submersible Motors

1 hồ sơ sản phẩm

Oil Filled Submersible Pumps

3 hồ sơ sản phẩm

Submersible Multistage Pumps

5 hồ sơ sản phẩm

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

4BHS2 / 4BHS4 / 4BHS7 / 4BHS15

4BHS2 / 4BHS4 / 4BHS7 / 4BHS15 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

4WN1 / 4WN2 / 4WN3 / 4WN4 / 4WN5 / 4WN6 / 4WN8 / 4WN10 / 4WN12 / 4WN15

4WN1 / 4WN2 / 4WN3 / 4WN4 / 4WN5 / 4WN6 / 4WN8 / 4WN10 / 4WN12 / 4WN15 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Submersible Deepwell Pumps

1 hồ sơ sản phẩm

Submersible Pumps

1 hồ sơ sản phẩm

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

40DSF / 50DS / 65DS / 80DS / 100DS / 50DV / 65DV / 65DL / 80DL / 100DL / 150DL / 200DL / 250DL / 300DL / 80DML / 100DML / 150DML / 50DMLF / 80DMLV / 100DMLV

40DSF / 50DS / 65DS / 80DS / 100DS / 50DV / 65DV / 65DL / 80DL / 100DL / 150DL / 200DL / 250DL / 300DL / 80DML / 100DML / 150DML / 50DMLF / 80DMLV / 100DMLV là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Submersible Sewage Pumps

2 hồ sơ sản phẩm

Bơm và hệ thống bơm
Ebara logo

Hồ sơ sản phẩm

DW / DW VOX / DWF / DW VOXF / DWFZ / DW VOXFZ

DW / DW VOX / DWF / DW VOXF / DWFZ / DW VOXFZ là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Standardised End Suction Pumps

1 hồ sơ sản phẩm

Booster Sets

1 hồ sơ sản phẩm

Ebara Pumps Bơm và hệ thống bơm | Mẫu sản phẩm và bảng dữ liệu | AquaChain