Quay lại Bơm và hệ thống bơm
Armstrong logo

Hồ sơ thương hiệu quốc tế

Armstrong Pumps

Armstrong Fluid Technology is a fluid-flow equipment manufacturer incorporated in 1934, now known for intelligent pumps, valves, heat exchangers, controls, and integrated plant packages.

Giới thiệu thương hiệu và danh mục sản phẩm

Armstrong Fluid Technology is a fluid-flow equipment manufacturer incorporated in 1934, now known for intelligent pumps, valves, heat exchangers, controls, and integrated plant packages.In water-related systems it is relevant where HVAC, district energy, building services, heat transfer, fire protection, and digital pump optimization intersect with plant water management.

Armstrong Pumps's position in pumps and pumping equipment is defined by product families such as End Suction Base Mounted Pumps, Stock Motor Pumps, Motor Mounted Pumps and Vertical In-Line Pumps.

The portfolio is best understood inside raw water intake, RO/NF feed, transfer, boosting, chemical dosing, wastewater lift, and desalination hydraulics, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Series 4030, Series 4270 and Series 4280.Selection should focus on flow, head, efficiency, NPSH margin, wetted materials, seals, and drive arrangement.

7

Mẫu và dòng sản phẩm

6

Dòng sản phẩm

Danh mục mẫu

Tra cứu mẫu nhanh

7 mẫu và dòng sản phẩm

Tìm thông số và so sánh với sản phẩm của thương hiệu khác trong cùng danh mục.

Sản phẩm và tài liệu
Lọc theo khoảng giá trị

Lọc theo đơn vị hiển thị. Thông số thiếu, khoảng giá trị và điều kiện thử không được dùng làm giá trị đơn để lọc.

Hiển thị 7 trên 7 mẫu

So sánh 2–4 mẫu tương thích giữa các thương hiệu. Danh sách được lưu trên thiết bị này.

Tư vấn các mẫu đã chọn

Series 4030

End Suction Base Mounted Pumps

Connections: Drilled and tapped connections for gauges and drain

Series 4030 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Series 4270

Stock Motor Pumps

Max. flow (3600 rpm): 130 USgpm (8.2 L/s) · Max. head (3600 rpm): 130 ft (39.6 m) · Max. working pressure: 150 psig (1034 kPa)

Series 4270 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Series 4280

Motor Mounted Pumps

For glycols above 30% by weight: Silicon carbide face

Series 4280 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Series 4300

Vertical In-Line Pumps

Flow Range: In excess of 30,000 USgpm (1,900 L/s) · Motor Connection: Heavy cylindrical bracket with 360° register provides a rigid union of pump and motor

Series 4300 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Series 4700

Vertical Multistage Pumps

Speed: 50–60 Hz, 3000-3600 RPM · Pressure Capabilities: Beyond 300 psi

Series 4700 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Series 4360 & 4380

Vertical In-Line Pumps

Hydrostatic Test Pressure: 150% maximum working pressure at ambient temperature · Pressure/Temperature Chart: The document includes pressure/temperature charts for various configurations:

Series 4360 & 4380 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Series 4600

HSC Pumps

Nhiệt độ: 300 °F (150 °C)

Series 4600 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Dòng sản phẩm và hướng dẫn lựa chọn

Dòng sản phẩm và hướng dẫn lựa chọn

Cách chọn Bơm và hệ thống bơm của Armstrong

Phần này giải thích các dòng sản phẩm chính của Armstrong và những thông số cần so sánh trước khi chọn mẫu cụ thể.

Bước 1: Chọn dòng sản phẩm theo ứng dụng

Các dòng chính trên trang gồm End Suction Base Mounted Pumps, Stock Motor Pumps, Motor Mounted Pumps, Vertical In-Line Pumps. Chọn dòng phù hợp với mục tiêu xử lý, dạng thiết bị và điều kiện vận hành, sau đó dùng danh mục mẫu bên dưới để so sánh thông số.

Bước 2: Xác nhận mẫu bằng thông số chính

Sau khi chọn dòng sản phẩm, so sánh flow and head, materials, efficiency, duty cycle. Với dự án thay thế, kiểm tra điều kiện lắp đặt hoặc nạp vật liệu, kiểu kết nối và độ tương thích với hệ thống hiện hữu. Với dự án mới, xem xét phương thức vận hành, bảo trì và nguồn phụ tùng hoặc vật tư tiêu hao.

Tổng quan dòng sản phẩm

Trang này có 6 dòng sản phẩm.

End Suction Base Mounted Pumps

1 model trong dòng này. Representative models: Series 4030.

Stock Motor Pumps

1 model trong dòng này. Representative models: Series 4270.

Motor Mounted Pumps

1 model trong dòng này. Representative models: Series 4280.

Vertical In-Line Pumps

2 models trong dòng này. Representative models: Series 4300, Series 4360 & 4380.

Vertical Multistage Pumps

1 model trong dòng này. Representative models: Series 4700.

HSC Pumps

1 model trong dòng này. Representative models: Series 4600.

Giới thiệu sản phẩm và tài liệu

Sản phẩm và tài liệu kỹ thuật thương hiệu

7 mẫu và dòng sản phẩm

Xem ứng dụng, bảng dữ liệu và hướng dẫn dòng sản phẩm.

End Suction Base Mounted Pumps

1 hồ sơ sản phẩm

Stock Motor Pumps

1 hồ sơ sản phẩm

Motor Mounted Pumps

1 hồ sơ sản phẩm

Vertical In-Line Pumps

2 hồ sơ sản phẩm

Bơm và hệ thống bơm
Armstrong logo

Hồ sơ sản phẩm

Series 4360 & 4380

Series 4360 & 4380 là sản phẩm bơm cho hệ thống xử lý nước, cần so sánh theo lưu lượng, cột áp, vật liệu và chế độ vận hành.

Vertical Multistage Pumps

1 hồ sơ sản phẩm

HSC Pumps

1 hồ sơ sản phẩm

Armstrong Pumps Bơm và hệ thống bơm | Mẫu sản phẩm và bảng dữ liệu | AquaChain