Quay lại Điện khử ion (EDI)
Dow logo

Hồ sơ thương hiệu quốc tế

DOW, EDI modules

DuPont Water Solutions is a global water purification and separation portfolio built around recognized technologies such as FilmTec membranes, AmberLite resins, inge ultrafiltration, and related industrial separation materials.

Giới thiệu thương hiệu và danh mục sản phẩm

DuPont Water Solutions is a global water purification and separation portfolio built around recognized technologies such as FilmTec membranes, AmberLite resins, inge ultrafiltration, and related industrial separation materials.

Its influence comes from breadth: the same corporate water platform is used in drinking water, desalination, industrial reuse, pharmaceutical and food processing, electronics ultrapure water, and selective purification.DOW, EDI modules's position in electrodeionization (EDI) is defined by product families such as DOW EDI modules.

The portfolio is best understood inside ultrapure water, pharmaceutical water, power generation makeup, electronics rinsing, and final polishing after RO, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include EDI-210 and EDI-310.Selection should focus on feed conductivity, CO2 and silica load, module capacity, recovery, and power integration.

2

Mẫu và dòng sản phẩm

1

Dòng sản phẩm

Danh mục mẫu

Tra cứu mẫu nhanh

2 mẫu và dòng sản phẩm

Tìm thông số và so sánh với sản phẩm của thương hiệu khác trong cùng danh mục.

Sản phẩm và tài liệu
Lọc theo khoảng giá trị

Lọc theo đơn vị hiển thị. Thông số thiếu, khoảng giá trị và điều kiện thử không được dùng làm giá trị đơn để lọc.

Hiển thị 2 trên 2 mẫu

So sánh 2–4 mẫu tương thích giữa các thương hiệu. Danh sách được lưu trên thiết bị này.

Tư vấn các mẫu đã chọn

EDI-210

DOW EDI modules

Dilute Product Flow Rate: 6.6 to 10 gpm (1.5 to 2.2 m³/h) · Concentrate Inlet Flow: 2.2 to 4.5 gpm (0.5 to 1.0 m³/h) · Inlet Pressure (continuous operation): 36 to 80 psi (2.5 to 5.5 Bar)

EDI-210 là phần tử màng xử lý nước, cần so sánh theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

EDI-310

DOW EDI modules

Dilute Water Flow rate: 1.5 to 2.2 m³/h (6.6 to 10 gpm) · Max. Inlet Pressure: 6.9 bar (100 psig) · Max. Continuous Operating Pressure: 5.5 bar (80 psig)

EDI-310 là phần tử màng xử lý nước, cần so sánh theo loại nước cấp, chất lượng nước mục tiêu, diện tích màng và áp suất vận hành.

Dòng sản phẩm và hướng dẫn lựa chọn

Dòng sản phẩm và hướng dẫn lựa chọn

Cách chọn Điện khử ion (EDI) của DOW,

Phần này giải thích các dòng sản phẩm chính của DOW, và những thông số cần so sánh trước khi chọn mẫu cụ thể.

Bước 1: Chọn dòng sản phẩm theo ứng dụng

Các dòng chính trên trang gồm DOW EDI modules. Chọn dòng phù hợp với mục tiêu xử lý, dạng thiết bị và điều kiện vận hành, sau đó dùng danh mục mẫu bên dưới để so sánh thông số.

Bước 2: Xác nhận mẫu bằng thông số chính

Sau khi chọn dòng sản phẩm, so sánh feed conductivity, silica/CO2 load, recovery target, stack configuration. Với dự án thay thế, kiểm tra điều kiện lắp đặt hoặc nạp vật liệu, kiểu kết nối và độ tương thích với hệ thống hiện hữu. Với dự án mới, xem xét phương thức vận hành, bảo trì và nguồn phụ tùng hoặc vật tư tiêu hao.

Tổng quan dòng sản phẩm

Trang này có 1 dòng sản phẩm.

DOW EDI modules

2 models trong dòng này. Representative models: EDI-210, EDI-310.

Giới thiệu sản phẩm và tài liệu

Sản phẩm và tài liệu kỹ thuật thương hiệu

2 mẫu và dòng sản phẩm

Xem ứng dụng, bảng dữ liệu và hướng dẫn dòng sản phẩm.

DOW EDI modules

2 hồ sơ sản phẩm

DOW, EDI modules Điện khử ion (EDI) | Mẫu sản phẩm và bảng dữ liệu | AquaChain