Quay lại Prominent Sensors
ProMinent logo

Tóm tắt tài liệu kỹ thuật

DULCOTEST PHEI 112 pH

Engineering summary from PDF text extraction for DULCOTEST PHEI 112 pH. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Name: pH Sensor PHEI 112 SE
  • Order Number: 1076610
  • Part Number: 983143 TM DT 037 03/17 EN

Operating limits

  • pH-range: 0 … 14 (1 … 12 for optimum service life)
  • Operating temperature: 0 ... 80 °C
  • Maximum pressure: 6 bar
  • Conductivity: > 50 μS/cm
  • Fitting position: vertical up to +25 °
  • Storage temperature: 10 ... 30°C

Sensor construction

  • Diaphragms: Double junction reference system (PTFE)
  • Reference system: Ag/AgCl (3 mol KCl/gel)
  • Screw-in thread: One 1/2” and two 3/4” NPT threads
  • Sensor head: SN 6 plug-in head
  • Material of sensor shaft: Fibreglass-reinforced PPE
  • Sensor shaft Ø (below 1/2” NPT thread): 17 ± 0.2 mm
  • Sensor shaft Ø (below 3/4” NPT thread): 22 ± 0.2 mm
  • Fitting length A: 20 ± 0.2 mm from the lower end of the 1/2" thread
  • Fitting length B: 60 ± 0.2 mm from the lower end of the 3/4" thread

Typical applications

  • Industrial waste water
  • Municipal waste water
  • Cooling water
  • Process water
  • Water in the chemical industry and paper making
  • Generally water with solid fractions

Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.