Introduction to WHO Guidelines
WHO drinking-water guidance supports national standards and preventive risk management. This article retains a selected historical chemical comparison associated with the 1993 second edition; it is not the latest guideline table. The current consolidated fourth edition incorporates the first, second and third addenda and was published in 2026.
Use the current WHO edition and chemical fact sheets for present assessment, alongside applicable national law. The illustrative concentration column below is not a universal normal freshwater range. Reference entries also include acceptability or operational considerations, which must not be mistaken for health-based limits; “No guideline” does not establish harmlessness.
For a broader perspective on drinking water quality, you may also find our article on Drinking Water Standards insightful.
Inorganic Substances in Drinking Water
The presence of inorganic elements and compounds in drinking water can originate from natural geological formations, agricultural runoff, or industrial discharges. The WHO guidelines set health-based limits to mitigate potential risks.
| Element/Substance | Symbol/Formula | Illustrative reported concentration (not a universal range) | Historical reference entry |
|---|
| Aluminium | Al | 0.2 mg/L (0.2 ppm) | No guideline |
| Ammonia/ammonium | NH₃/NH₄⁺ | < 0.2 mg/L (up to 0.3 mg/L in anaerobic waters) | No guideline |
| Antimony | Sb | < 4 µg/L (4 ppb) | 0.005 mg/L (5 ppb) |
| Arsenic | As | 0.01 mg/L (10 ppb) | 0.01 mg/L (10 ppb) |
| Asbestos | | | No guideline |
| Barium | Ba | 0.3 mg/L (0.3 ppm) | 0.7 mg/L (0.7 ppm) |
| Beryllium | Be | < 1 µg/L (1 ppb) | No guideline |
| Boron | B | < 1 mg/L (1 ppm) | 0.3 mg/L (0.3 ppm) |
| Cadmium | Cd | < 1 µg/L (1 ppb) | 0.003 mg/L (3 ppb) |
| Chloride | Cl⁻ | 250 mg/L (250 ppm) | No health guideline; taste can be detectable above about 250 mg/L |
| Chromium | Cr³⁺, Cr⁶⁺ | < 2 µg/L (2 ppb) | 0.05 mg/L (50 ppb) |
| Colour | | Not mentioned | No guideline |
| Copper | Cu | 2 mg/L (2 ppm) | 2 mg/L (2 ppm) |
| Cyanide | CN⁻ | | 0.07 mg/L (70 ppb) |
| Dissolved oxygen | O₂ | | No guideline |
| Fluoride | F | < 1.5 mg/L (up to 10 mg/L) | 1.5 mg/L (1.5 ppm) |
| Hardness | mg/L CaCO₃ | | No guideline |
| Hydrogen sulfide | H₂S | | No guideline |
| Iron | Fe | 0.5 - 50 mg/L (0.5 - 50 ppm) | No guideline |
| Lead | Pb | | 0.01 mg/L (10 ppb) |
| Manganese | Mn | 0.5 mg/L (0.5 ppm) | 0.5 mg/L (500 ppb), provisional in 1993 |
| Mercury | Hg | < 0.5 µg/L (0.5 ppb) | 0.001 mg/L (1 ppb) |
| Molybdenum | Mo | < 0.01 mg/L (10 ppb) | 0.07 mg/L (70 ppb) |
| Nickel | Ni | < 0.02 mg/L (20 ppb) | 0.02 mg/L (20 ppb) |
| Nitrate and nitrite | NO₃⁻, NO₂⁻ | Site-specific; measure separately | Nitrate: 50 mg/L as nitrate; nitrite: 3 mg/L as nitrite, provisional in 1993; not total nitrogen |
| Turbidity | | Not mentioned | No guideline |
| pH | | | No guideline |
| Selenium | Se | < 0.01 mg/L (10 ppb) | 0.01 mg/L (10 ppb) |
| Silver | Ag | 5 – 50 µg/L (5 – 50 ppb) | No guideline |
| Sodium | Na | < 20 mg/L (20 ppm) | No health guideline; taste consideration around 200 mg/L |
| Sulfate | SO₄²⁻ | 500 mg/L (500 ppm) | No health guideline; assess sources above 500 mg/L with health authorities |
| Inorganic tin | Sn | | No guideline |
| TDS (Total Dissolved Solids) | | | No guideline |
| Uranium | U | | No chemical health guideline in 1993; approximately 0.14 mg/L natural uranium was a radiological equivalent, not a current chemical limit |
| Zinc | Zn | 3 mg/L (3 ppm) | No health guideline; acceptability problems above about 3 mg/L |
Organic Compounds in Drinking Water
Organic compounds can enter drinking water sources from various anthropogenic activities, including industrial processes, agriculture, and urban runoff. The WHO guidelines provide limits for numerous organic contaminants.
Chlorinated Alkanes
| Substance | Formula | Historical reference entry |
|---|
| Carbon tetrachloride | CCl₄ | 2 µg/L (2 ppb) |
| Dichloromethane | CH₂Cl₂ | 20 µg/L (20 ppb) |
| 1,1-Dichloroethane | C₂H₄Cl₂ | No guideline |
| 1,2-Dichloroethane | ClCH₂CH₂Cl | 30 µg/L (30 ppb) |
| 1,1,1-Trichloroethane | CH₃CCl₃ | 2000 µg/L (2000 ppb) |
Chlorinated Ethenes
| Substance | Formula | Historical reference entry |
|---|
| 1,1-Dichloroethene | C₂H₂Cl₂ | 30 µg/L (30 ppb) |
| 1,2-Dichloroethene | C₂H₂Cl₂ | 50 µg/L (50 ppb) |
| Trichloroethene | C₂HCl₃ | 70 µg/L (70 ppb) |
| Tetrachloroethene | C₂Cl₄ | 40 µg/L (40 ppb) |
Aromatic Hydrocarbons
| Substance | Formula | Historical reference entry |
|---|
| Benzene | C₆H₆ | 10 µg/L (10 ppb) |
| Toluene | C₇H₈ | 700 µg/L (700 ppb) |
| Xylenes | C₈H₁₀ | 500 µg/L (500 ppb) |
| Ethylbenzene | C₈H₁₀ | 300 µg/L (300 ppb) |
| Styrene | C₈H₈ | 20 µg/L (20 ppb) |
Polynuclear Aromatic Hydrocarbons (PAHs)
| Substance | Formula | Historical reference entry |
|---|
| Benzo(a)pyrene | C₂₀H₁₂ | 0.7 µg/L (0.7 ppb) |
The 0.7 µg/L entry refers to benzo(a)pyrene, not the sum of all PAHs. Other PAHs have different evidence and cannot be represented by one molecular formula.
Chlorinated Benzenes
| Substance | Formula | Historical reference entry |
|---|
| Monochlorobenzene (MCB) | C₆H₅Cl | 300 µg/L (300 ppb) |
| 1,2-Dichlorobenzene (1,2-DCB) | C₆H₄Cl₂ | 1000 µg/L (1000 ppb) |
| 1,3-Dichlorobenzene (1,3-DCB) | C₆H₄Cl₂ | No guideline |
| 1,4-Dichlorobenzene (1,4-DCB) | C₆H₄Cl₂ | 300 µg/L (300 ppb) |
| Trichlorobenzenes (TCBs) | C₆H₃Cl₃ | 20 µg/L (20 ppb) |
Miscellaneous Organic Constituents
| Substance | Formula | Historical reference entry |
|---|
| Di(2-ethylhexyl)adipate (DEHA) | C₂₂H₄₂O₄ | 80 µg/L (80 ppb) |
| Di(2-ethylhexyl)phthalate (DEHP) | C₂₄H₃₈O₄ | 8 µg/L (8 ppb) |
| Acrylamide | C₃H₅NO | 0.5 µg/L (0.5 ppb) |
| Epichlorohydrin (ECH) | C₃H₅ClO | 0.4 µg/L (0.4 ppb) |
| Hexachlorobutadiene (HCBD) | C₄Cl₆ | 0.6 µg/L (0.6 ppb) |
| Ethylenediaminetetraacetic acid (EDTA) | C₁₀H₁₆N₂O₈ | 200 µg/L (200 ppb) |
| Nitrilotriacetic acid (NTA) | N(CH₂COOH)₃ | 200 µg/L (200 ppb) |
Organotins
| Substance | Formula | Historical reference entry |
|---|
| Dialkyltins | R₂SnX₂ | No guideline |
| Tributyltin oxide (TBTO) | C₂₄H₅₄OSn₂ | 2 µg/L (2 ppb) |
Pesticides in Drinking Water
Pesticides are widely used in agriculture and can contaminate water sources through runoff and leaching. The WHO sets guidelines for various pesticides due to their potential health impacts.
| Substance | Formula | Historical reference entry |
|---|
| Alachlor | C₁₄H₂₀ClNO₂ | 20 µg/L (20 ppb) |
| Aldicarb | C₇H₁₄N₂O₂S | 10 µg/L (10 ppb) |
| Aldrin and dieldrin | C₁₂H₈Cl₆ / C₁₂H₈Cl₆O | 0.03 µg/L (0.03 ppb) |
| Atrazine | C₈H₁₄ClN₅ | 2 µg/L (2 ppb) |
| Bentazone | C₁₀H₁₂N₂O₃S | 30 µg/L (30 ppb) |
| Carbofuran | C₁₂H₁₅NO₃ | 5 µg/L (5 ppb) |
| Chlordane | C₁₀H₆Cl₈ | 0.2 µg/L (0.2 ppb) |
| Chlorotoluron | C₁₀H₁₃ClN₂O | 30 µg/L (30 ppb) |
| DDT | C₁₄H₉Cl₅ | 2 µg/L (2 ppb) |
| 1,2-Dibromo-3-chloropropane | C₃H₅Br₂Cl | 1 µg/L (1 ppb) |
| 2,4-Dichlorophenoxyacetic acid (2,4-D) | C₈H₆Cl₂O₃ | 30 µg/L (30 ppb) |
| 1,2-Dichloropropane | C₃H₆Cl₂ | No guideline |
| 1,3-Dichloropropane | C₃H₆Cl₂ | No guideline |
| 1,3-Dichloropropene | C₃H₄Cl₂ | 20 µg/L (20 ppb) |
| Ethylene dibromide (EDB) | BrCH₂CH₂Br | No guideline |
| Heptachlor and heptachlor epoxide | C₁₀H₅Cl₇ / C₁₀H₅Cl₇O | 0.03 µg/L (0.03 ppb) |
| Hexachlorobenzene (HCB) | C₆Cl₆ | 1 µg/L (1 ppb) |
| Isoproturon | C₁₂H₁₈N₂O | 9 µg/L (9 ppb) |
| Lindane | C₆H₆Cl₆ | 2 µg/L (2 ppb) |
| MCPA | C₉H₉ClO₃ | 2 µg/L (2 ppb) |
| Methoxychlor | (C₆H₄OCH₃)₂CHCCl₃ | 20 µg/L (20 ppb) |
| Metolachlor | C₁₅H₂₂ClNO₂ | 10 µg/L (10 ppb) |
| Molinate | C₉H₁₇NOS | 6 µg/L (6 ppb) |
| Pendimethalin | C₁₃H₁₉O₄N₃ | 20 µg/L (20 ppb) |
| Pentachlorophenol (PCP) | C₆HCl₅O | 9 µg/L (9 ppb) |
| Permethrin | C₂₁H₂₀Cl₂O₃ | 20 µg/L (20 ppb) |
| Propanil | C₉H₉Cl₂NO | 20 µg/L (20 ppb) |
| Pyridate | C₁₉H₂₃ClN₂O₂S | 100 µg/L (100 ppb) |
| Simazine | C₇H₁₂ClN₅ | 2 µg/L (2 ppb) |
| Trifluralin | C₁₃H₁₆F₃N₃O₄ | 20 µg/L (20 ppb) |
Chlorophenoxy Herbicides (excluding 2,4-D and MCPA)
| Substance | Formula | Historical reference entry |
|---|
| 2,4-DB | C₁₀H₁₀Cl₂O₃ | 90 µg/L (90 ppb) |
| Dichlorprop | C₉H₈Cl₂O₃ | 100 µg/L (100 ppb) |
| Fenoprop | C₉H₇Cl₃O₃ | 9 µg/L (9 ppb) |
| MCPB | C₁₁H₁₃ClO₃ | No guideline |
| Mecoprop | C₁₀H₁₁ClO₃ | 10 µg/L (10 ppb) |
| 2,4,5-T | C₈H₅Cl₃O₃ | 9 µg/L (9 ppb) |
Disinfectants and Disinfection By-products
Disinfectants are essential for treating drinking water, but they can react with natural organic matter to form disinfection by-products (DBPs), some of which may be harmful.
Disinfectants
| Substance | Formula | Historical reference entry |
|---|
| Monochloramine | NH₂Cl | 3 mg/L (3 ppm) |
| Chlorine | Cl₂ | 5 mg/L (5 ppm) |
| Chlorine dioxide | ClO₂ | No guideline |
| Iodine | I₂ | No guideline |
Disinfectant By-products
| Substance | Formula | Historical reference entry |
|---|
| Bromate | BrO₃⁻ | 25 µg/L (25 ppb) |
| Chlorate | ClO₃⁻ | No guideline |
| Chlorite | ClO₂⁻ | 200 µg/L (200 ppb) |
| Formaldehyde | HCHO | 900 µg/L (900 ppb) |
| MX (3-Chloro-4-dichloromethyl-5-hydroxy-2(5H)-furanone) | C₅H₃Cl₃O₃ | No guideline |
| Cyanogen chloride | ClCN | 70 µg/L (70 ppb) |
| Chloropicrin | CCl₃NO₂ | No guideline |
Chlorophenols
| Substance | Formula | Historical reference entry |
|---|
| 2-Chlorophenol (2-CP) | C₆H₅ClO | No guideline |
| 2,4-Dichlorophenol (2,4-DCP) | C₆H₄Cl₂O | No guideline |
| 2,4,6-Trichlorophenol (2,4,6-TCP) | C₆H₃Cl₃O | 200 µg/L (200 ppb) |
Trihalomethanes
| Substance | Formula | Historical reference entry |
|---|
| Bromoform | CHBr₃ | 100 µg/L (100 ppb) |
| Dibromochloromethane | CHBr₂Cl | 100 µg/L (100 ppb) |
| Bromodichloromethane | CHBrCl₂ | 60 µg/L (60 ppb) |
| Chloroform | CHCl₃ | 200 µg/L (200 ppb) |
Chlorinated Acetic Acids
| Substance | Formula | Historical reference entry |
|---|
| Monochloroacetic acid | C₂H₃ClO₂ | No guideline |
| Dichloroacetic acid | C₂H₂Cl₂O₂ | 50 µg/L (50 ppb) |
| Trichloroacetic acid | C₂HCl₃O₂ | 100 µg/L (100 ppb) |
| Chloral hydrate (trichloroacetaldehyde) | CCl₃CH(OH)₂ | 10 µg/L (10 ppb) |
| Chloroacetones | C₃H₅OCl | No guideline |
Halogenated Acetonitriles
| Substance | Formula | Historical reference entry |
|---|
| Dichloroacetonitrile | C₂HCl₂N | 90 µg/L (90 ppb) |
| Dibromoacetonitrile | C₂HBr₂N | 100 µg/L (100 ppb) |
| Bromochloroacetonitrile | C₂HBrClN | No guideline |
| Trichloroacetonitrile | C₂Cl₃N | 1 µg/L (1 ppb) |
AquaChain Engineering Tip
Plan sampling around source vulnerability and actual treatment. Where chlorination is used, assess DBPs such as trihalomethanes and haloacetic acids at relevant distribution points, and use competent laboratories and validated methods. WHO guidance informs this work, while legally enforceable compliance follows local law; chemical tables do not replace microbial control.
Frequently Asked Questions
Q: What is the primary purpose of the WHO Drinking-Water Quality Guidelines?
A: The guidelines serve as an international reference to promote and protect public health by establishing a scientific basis for national drinking water quality standards and risk management strategies.
Q: Are these guidelines legally binding for all countries?
A: No, the WHO guidelines are not legally binding; they are recommendations that countries adapt into their national regulations based on local conditions, resources, and priorities.
Q: Why are there "No guideline" entries for some substances?
A: An absent guideline may reflect insufficient evidence, low exposure at expected concentrations, or a primarily operational or acceptability concern. It is not a finding of universal safety. Check the reason in the relevant current fact sheet and assess the actual exposure.
References