Back to Water glossary

Water glossary

Selecting Ozone-Resistant Materials for Water Treatment Systems

A comprehensive guide to selecting appropriate materials for components in ozone generation and application systems, ensuring durability and safety.

Selecting Ozone-Resistant Materials for Water Treatment Systems

Ozone, a powerful oxidant used extensively in water treatment for disinfection, oxidation, and odor control, can be highly corrosive to many common engineering materials. Proper material selection is paramount for the longevity, safety, and efficiency of any ozone generation, distribution, or application system. This guide outlines commonly accepted materials for various ozone exposure scenarios. For a deeper understanding of ozone's characteristics, refer to Understanding Ozone Properties.

Materials Resistant to Ozone Gas

When designing systems where components will be exposed directly to ozone gas, particularly at higher concentrations, specific materials offer superior resistance.

  • Glass: Highly resistant to ozone gas, often utilized for laboratory equipment, generator dielectrics, and viewports due to its inertness.
  • Polytetrafluoroethylene (PTFE) / Teflon®: Exhibits excellent chemical inertness and robust ozone resistance, making it suitable for tubing, linings, and electrical insulation.
  • Stainless Steel (300 series): Grades such as 304, 304L, 316, and 316L offer good resistance to dry ozone gas, commonly used for piping and structural components.

Materials Resistant to Ozone in Solution

Components in contact with water containing dissolved ozone require materials that can withstand both the oxidative properties of ozone and the aqueous environment.

  • Stainless Steel (300 series): Grades like 304L and 316L are frequently specified for piping, tanks, diffusers, and other components in contact with ozonated water due to their enhanced corrosion resistance.
  • Polyvinyl Chloride (PVC): Generally suitable for lower concentrations of dissolved ozone and specific temperature ranges (typically below 40°C or 104°F).
  • Concrete: Can be used for large contact basins or structures, though often requiring specialized liners or coatings to enhance long-term ozone resistance and prevent degradation.
  • Polymethyl Methacrylate (PMMA) / Plexiglass®: Can be used for viewing windows and certain structural elements in specific applications, but its resistance might be lower than glass or PTFE at very high ozone levels or temperatures.
  • Polytetrafluoroethylene (PTFE) / Teflon®: Provides exceptional resistance, making it an ideal choice for critical wetted components, linings, and specialty piping.
  • Glass: Maintains its high resistance when exposed to dissolved ozone, similar to its performance with ozone gas.

Gaskets, Fittings, and Sealing Materials

For reliable and leak-proof ozone systems, the choice of sealing materials is critical, as these components are often highly stressed and particularly vulnerable to ozone attack.

  • Stainless Steel (300 series): Forms the base material for many fitting bodies, flanges, and coupling components.
  • Kalrez® (Perfluoroelastomer - FFKM): Offers broad chemical resistance, including to high concentrations of ozone and elevated temperatures, and is frequently specified for critical O-rings and seals in demanding applications.
  • Kynar® (Polyvinylidene Fluoride - PVDF): Known for its excellent chemical and ozone resistance, often used for pipes, fittings, valve components, and pump housings.
  • Polytetrafluoroethylene (PTFE) / Teflon®: A chemically resistant option for suitably designed gaskets and packing; PTFE is not an elastomer, so seal geometry, creep and static/dynamic duty must be checked.
  • Viton® (Fluoroelastomer - FKM): Offers good ozone resistance, particularly at moderate concentrations and temperatures. However, it may be less robust than FFKM or PTFE in extreme conditions or with prolonged high-concentration ozone exposure.

Considerations for High Ozone Concentrations

It is crucial to understand that the resistance of materials can be significantly concentration-dependent. Material ratings depend on compound grade, ozone concentration, moisture, temperature and mechanical stress. A gas concentration such as 20% by weight is not a universal material-failure threshold. For such demanding applications, specialized high-performance polymers, ceramics, or specific metallic alloys may be required, and detailed material compatibility testing is strongly recommended to ensure system integrity and safety.

AquaChain Engineering Tip

316L stainless steel may suit an ozone contactor body and baffles after checking the actual water chemistry, especially chlorides. Select seals using compound-specific compatibility and static/dynamic mechanical requirements: PTFE, Kalrez® and Viton® are not interchangeable, and PVDF is a structural thermoplastic rather than a generic elastomeric seal. Confirm leakage performance under the intended conditions.


Frequently Asked Questions

Q: Why is material selection critical for ozone systems? A: Ozone is a strong oxidant that can aggressively degrade many common engineering materials, leading to structural failures, leaks, and potential safety hazards if non-resistant materials are used in system components.

Q: Are there any common materials that should strictly be avoided in ozone systems? A: Natural rubber (NR) and ordinary nitrile rubber (NBR) are generally vulnerable to ozone. Ethylene Propylene Diene Monomer (EPDM) commonly has good ozone resistance and should not be rejected as a class; verify the specific compound, concentration, temperature and duty.

Q: Does temperature affect material resistance to ozone? A: Yes, elevated temperatures significantly accelerate the degradation of materials when exposed to ozone. Even materials considered ozone-resistant may show reduced lifespan or performance at higher operating temperatures, making temperature a critical factor in material selection.

Reference: Parker O-ring handbook: elastomer compounds, ozone resistance and seal design.