Back to Water glossary

Water glossary

Understanding Disinfection Byproducts (DBPs) in Water Treatment

Explore the types, formation, health effects, and regulatory standards of key Disinfection Byproducts (DBPs) like THMs, HAAs, and MX, crucial for safe drinking water.

Disinfection is a critical step in water treatment, ensuring the elimination of harmful pathogens. However, the interaction of disinfectants with organic and inorganic matter present in source water inevitably leads to the formation of Disinfection Byproducts (DBPs). While extensive research has focused on certain DBPs, the full scope of their formation and health implications continues to be an active area of study.

General DBP Characteristics and Formation

All chemical disinfectants can contribute to DBP formation. The specific types and concentrations of DBPs formed are highly dependent on the water's composition, particularly its Total Organic Carbon (TOC) content, which serves as an indicator of DBP precursor material. Higher TOC generally correlates with greater DBP formation potential.

DBPs exhibit a wide range of physicochemical properties. Some are volatile and hydrophobic, while others are non-volatile and hydrophilic, encompassing both chlorinated and non-chlorinated aromatic and aliphatic substances. Due to the widespread use of chlorine as a disinfectant, especially in drinking water treatment, chlorinated DBPs have been the most thoroughly researched.

Key Types of Disinfection Byproducts

Trihalomethanes (THMs)

Trihalomethanes (CHX₃) were among the first DBPs identified in chlorinated water. They are formed during chlorine disinfection or disinfection by chlorinated compounds.

Formation & Examples

THMs are not formed by a direct reaction between chlorine and methane but rather through the reaction of chlorine with organic matter present in the water. The primary THMs include:

  • Trichloromethane (Chloroform): CHCl₃
  • Bromodichloromethane (BDCM): CHBrCl₂
  • Chlorodibromomethane: CHBr₂Cl
  • Tribromomethane (Bromoform): CHBr₃

The presence of bromide in the water significantly increases the likelihood of brominated THMs forming.

Factors Influencing Formation

  • Temperature: Higher temperatures, typically observed in summer, lead to increased THM concentrations.
  • Organic Matter Content: Elevated organic matter levels contribute to higher THM formation.
  • Source Water: Surface water generally exhibits higher THM concentrations than groundwater due to variations in organic matter types and concentrations.
  • pH: Higher pH values tend to favor THM formation over Haloacetic Acids (HAAs).

Reaction Mechanisms

Laboratory tests have shown that THMs can form from the reaction between propanone (acetone, CH₃COCH₃), a byproduct of ozone disinfection, and chlorine. At high pH values, hydrolysis can lead to chloroform formation from propanone:

  1. CH₃COCH₃ + 3HOCl → CH₃COCCl₃ + 3H₂O (Balanced schematic chlorination to trichloroacetone; conditions and intermediates are simplified.)
  2. CH₃COCCl₃ + H₂O → CH₃COOH + CHCl₃ (Trichloroacetone hydrolyzes to acetic acid and chloroform)

If bromine is present, brominated propanone can lead to the formation of brominated THMs. THMs can also be products of hydrolysis reactions involving other trihalogenic DBPs and transition products, such as trihaloacetonitriles, trihaloacetaldehydes, and brominated trihaloacetic acids.

Health Effects

THM toxicity and carcinogenic-hazard classifications differ between compounds. Some have produced liver, kidney or other effects in experimental studies at relevant doses; this does not establish that all THMs cause these effects in humans at every drinking-water concentration.

Regulatory Standards

The table retains selected historical values from WHO (2001) and U.S. EPA (2001); WHO recommendations are guidance, while EPA requirements are jurisdiction-specific. The later WHO chloroform guideline is 300 µg/L, and dibromochloromethane is 100 µg/L. For mixtures, WHO advises that the sum of individual concentration-to-guideline ratios should not exceed 1. National limits and compliance methods remain applicable.

CompoundWHO (2001) StandardUS EPA (2001) Standard (for total THMs)
Bromodichloromethane (BDCM)60 µg/L (60 ppb)-
Bromoform (Tribromomethane)100 µg/L (100 ppb)-
Chloroform (Trichloromethane)200 µg/L (200 ppb)-
Total THMs-80 µg/L (80 ppb)

Haloacetic Acids (HAAs)

Haloacetic Acids (HAAs) constitute another significant class of chlorinated DBPs. These are non-volatile compounds derived from acetic acid, where some hydrogen atoms are replaced by halogen atoms. HAAs can sometimes be found in higher concentrations than THMs, depending on water chemistry.

Formation & Characteristics

HAAs are significantly influenced by pH. Lower pH values tend to favor HAA formation, whereas higher pH values favor THM formation. The composition of naturally occurring organic matter (NOM) also plays a crucial role in determining the ratio of THM to HAA formation.

HAA occurrence depends on precursors, treatment and season; surface water is not invariably higher than groundwater. Some HAAs can undergo decomposition, with pathways depending on the specific compound and conditions. This does not mean all HAAs biologically convert to THMs.

Reaction Mechanisms

Laboratory pathways involving acetone and chlorine can generate halogenated ketones and acids. Further chlorination can produce tetra-, penta- or hexachloroacetone; hydrolysis products depend on the intermediate and conditions. These schematic routes do not describe the dominant mechanism in every natural water.

An example of a reaction chain for HAA formation:

  1. CH₃COCCl₃ + 2HOCl → CHCl₂COCCl₃ + 2H₂O (Balanced schematic further chlorination to pentachloroacetone.)
  2. CHCl₂COCCl₃ + H₂O → CHCl₂COOH + CHCl₃ (Balanced schematic hydrolysis to dichloroacetic acid and chloroform.)

Health Effects

Some HAAs have toxicological and carcinogenicity concerns, but the evidence is compound-specific. A group limit does not mean that every HAA has the same hazard classification or exposure-response relationship.

Regulatory Standards

CompoundUS EPA (2002) Standard (for total HAAs)WHO (2004) Standard
HAA5: sum of five specified haloacetic acids60 µg/L (60 ppb)No group value shown in this historical table; individual WHO guidance must be checked separately

Other Chlorination Byproducts

Haloacetonitriles (HANs), Halo-aldehydes, and Haloketones

These DBPs are generally present in lower concentrations compared to THMs and HAAs. They form rapidly during initial disinfection but can quickly decompose through hydrolysis or reactions with residual disinfectants. Unlike THMs and HAAs, their concentrations often do not show significant seasonal variation. Their formation is inhibited at high pH values.

  • Haloacetonitriles: Can form from nitrogen-containing organic precursors during disinfection. Formation competes with hydrolysis and other degradation reactions; decomposition is not explained by short contact time alone.

  • Halo-aldehydes and Haloketones: Include chlorinated and brominated carbonyl compounds. Acetaldehyde, which can occur after ozonation, can undergo chlorination to trihaloacetaldehydes; these compounds are not universally the second-largest DBP group.

    • Reaction mechanism of acetaldehyde and chlorine: CH₃CHO + 3HOCl → CCl₃CHO + 3H₂O (Balanced schematic chlorination to trichloroacetaldehyde.)

MX

MX is a chlorinated hydroxyfuranone identified in early research during the 1980s. It is strongly mutagenic in some laboratory assays and can contribute substantially to measured water-extract mutagenicity, but no fixed percentage applies to all waters. WHO describes a calculated health-based value of 1.8 µg/L (1.8 ppb), not a formal drinking-water guideline: reported concentrations are generally much lower, and analysis at these levels is difficult. Hazard and actual exposure must be considered separately.

Other Forms

Other DBPs frequently formed during water chlorination include halonitromethanes, halophenols, and halofurans.

Chlorite (Chlorine Dioxide Byproduct)

Chlorite (ClO₂⁻) is an important product of chlorine dioxide (ClO₂) use. High exposures can affect blood parameters and other toxicological endpoints; this should not be presented as inevitable anemia or neurological disease at ordinary regulated drinking-water concentrations. Assess chlorite and chlorate alongside disinfection performance.

AquaChain Engineering Tip

Characterize the raw water, including TOC, organic composition and bromide where relevant. Validate precursor removal and disinfectant application points for the actual water; ozone may generate bromate when bromide is present, and pre-oxidation is not automatically a net DBP reduction. Enhanced coagulation, adsorption or suitable membrane treatment can remove some precursors before primary chlorination while maintaining the required microbial barriers.

For more information on ensuring the safety of your drinking water, explore our guide on Drinking Water Standards.

Frequently Asked Questions

What are disinfection byproducts (DBPs)?

DBPs are chemical compounds formed when disinfectants, primarily chlorine, react with natural organic matter and inorganic substances present in the source water during water treatment processes.

Why are Trihalomethanes (THMs) and Haloacetic Acids (HAAs) often the most discussed DBPs?

THMs and HAAs are typically the most prevalent and well-studied classes of DBPs formed during chlorination. They often occur at higher concentrations and have recognized health implications, leading to their inclusion in many drinking water regulations.

How can the formation of DBPs in drinking water be minimized?

Minimizing DBP formation involves strategies such as reducing precursor material (e.g., through enhanced coagulation, activated carbon, or membrane filtration), optimizing disinfection practices (e.g., adjusting pH, using alternative disinfectants like chloramines or UV, or changing disinfectant application points), and monitoring source water quality.