Back to Water glossary

Water glossary

Bromine as a Disinfectant in Water Treatment

Explore the characteristics, production, applications, and environmental impact of bromine as a powerful disinfectant for swimming pools and cooling towers.

Bromine is a halogen used in approved pool and cooling-water disinfection products. Public drinking-water use requires specific approval and is not a routine primary treatment; suitability depends on the product, residuals and byproducts.

Bromine: Discovery and Characteristics

Carl Löwig prepared bromine in 1825, and Antoine-Jérôme Balard independently reported it in 1826. Both worked with bromide-rich waters. Its name derives from the Greek word "bromos", referring to its pungent smell.

Key Characteristics:

  • Atomic Number: 35
  • Element Group: Halogen
  • Reactivity: A reactive halogen that readily forms bromides; chlorine and fluorine are stronger elemental oxidants than bromine under comparable standard conditions.
  • Physical State: The only non-metallic element that is liquid at ordinary room temperature and atmospheric pressure.
  • Appearance: Reddish-brown liquid with a strong odor.
  • Density: Approximately 3.12 times denser than water (3.12 g/cm³ or 195 lb/ft³).
  • Phase Transitions: Becomes gaseous at 58.8 °C (137.8 °F) and solid at -7.3 °C (18.9 °F) or lower.
  • Toxicity: Highly poisonous in liquid form. Bromine vapor is corrosive and destructive to human skin, eyes, and the respiratory tract, causing severe burns. Concentrations as low as 1 part per million (ppm) can cause eye watering, and inhalation below 10 ppm can induce coughing and respiratory irritation.
  • Solubility: Easily dissolves in water (up to 35 g/L), carbon disulfide, and other organic solvents.

Reaction with Water and Ammonia

When dissolved in water, bromine forms hypobromous acid (HOBr), a weak acid that partially dissociates into hydrogen ions (H+^+) and hypobromite ions (OBr−^-). The pH of the water dictates the ratio of these species. Between pH 6.5 and 9, both HOBr and OBr−^- are present.

If water contains ammonia (NH3_3), bromamines such as NH2_2Br, NHBr2_2 and NBr3_3 can form. Their speciation, stability and biocidal activity depend on pH, dose and water chemistry; they are not universally equivalent to hypobromous acid.

Natural Occurrence and Production Methods

Bromine is found in nature primarily as bromide salts or organic bromine compounds produced by marine organisms. It is most abundant in soluble salts within seawater, salt lakes, and brines.

  • Seawater: Contains approximately 65 ppm (65 mg/L) bromine.
  • Brine: Features much higher concentrations, ranging from 2,500 to 10,000 ppm (2,500 to 10,000 mg/L).

Bromine is recovered from suitable bromide-rich brines, including deposits in the United States, China and the Dead Sea region. Source locations and production routes vary; a historical list is not a current production inventory.

Production Methods:

Historically, bromine was produced by reacting bromides with pyrolusite (MnO2_2) and sulfuric acid:

MnO2_2 + 4 H+^+ + 2 Br−^- → Mn2+^{2+} + 2 H2_2O + Br2_2

Small amounts can also be generated by reacting solid sodium bromide (NaBr) with concentrated sulfuric acid (H2_2SO4_4), which first forms hydrogen bromide gas (HBr), then oxidizes it to bromine:

NaBr (s) + H2_2SO4_4 (l) → HBr (g) + NaHSO4_4 (s) 2HBr (g) + H2_2SO4_4 (l) → Br2_2 (g) + SO2_2 (g) + 2H2_2O (l)

Electrolysis of bromide solutions also yields bromine at the positive electrode:

2 Br−^- → Br2_2 + 2 e−^-

Modern industrial production typically involves injecting chlorine gas into bromide-rich aqueous solutions, usually maintained at a pH of 3.5. The chlorine oxidizes bromide to bromine:

2Br−^- + Cl2_2 → 2Cl−^- + Br2_2

Applications of Bromine in Water Treatment

Bromine has been utilized for water disinfection since the 1930s, particularly in situations where chlorine alternatives are preferred.

Swimming Pool Disinfection

Bromine compounds serve as effective disinfectants against algae, bacteria, and odors in swimming pool water. Its use gained prominence during World War II when chlorine was scarce.

When liquid bromine is applied, it establishes an equilibrium with water:

Br2_2 + 2H2_2O ⇌ HOBr + H3_3O+^+ + Br−^-

Hypobromous acid (HOBr) then further dissociates:

HOBr + H2_2O ⇌ OBr−^- + H3_3O+^+

This equilibrium is highly pH-dependent. In typical swimming pool pH ranges, bromine primarily exists as hypobromous acid.

The following rounded legacy values illustrate the pH-dependent HOBr/OBr−^- distribution; temperature, ionic strength and rounding affect the fractions, so they are not exact design values:

pH% Bromine as HOBr% Bromine as OBr−^-
6.01000.0
6.599.40.6
7.098.02.0
7.594.06.0
8.083.017.0
8.557.043.0

Given the hazards of liquid bromine, solid bromine-containing products such as Bromine-Chlorine-Dimethylhydantoin (BCDMH) may be used. BCDMH releases hypobromous acid (HOBr) and hypochlorous acid (HOCl); HOCl can react with bromide ions (Br−^-) to form additional HOBr. Tablets or cartridges simplify handling but remain hazardous chemicals. Follow the approved product label, residual targets and byproduct controls; 200 mg/L (200 ppm) is not a general permissible BCDMH concentration.

Another method involves dissolving sodium bromide (a bromine salt) in water, then activating it with an oxidizer like hypochlorite or ozone to form hypobromous acid. Bromide ions, which are formed during disinfection, can be reactivated by the oxidizer, enhancing efficiency.

Bromine reacts with ammonia and nitrogenous compounds, producing bromamines and consuming oxidant. Hypobromous acid is affected by sunlight. The activity and decay of dibromamine (NHBr2_2) and other bromamines are condition-dependent; neither equivalence to free chlorine nor negligible residual can be assumed.

Cooling Tower Water Disinfection

Bromine-based products can be suitable for cooling towers. HOBr can remain a larger fraction at alkaline pH than HOCl does; approximate reference transition values such as pH 8.7 and 7.6 depend on conditions. Actual control depends on residual, contact, demand, biofilm and the approved program, not pH advantage alone.

Bromine reacts with ammonia to form bromamines. Their formation and decay depend on chemistry and do not guarantee continual release of HOBr or complete microbial control. Verify residuals, microbiological performance and the management of combined bromine.

Drinking Water Disinfection

Free bromine (Br2_2) is not a routine primary disinfectant for public drinking-water treatment. Taste, rapid demand and brominated byproducts require control. Any emergency use must follow a specifically approved product and public-health procedure; lack of a routine application is not proof that no residual can ever remain.

Advantages and Disadvantages of Bromine Use

Advantages:

  • High Solubility: Bromine dissolves in water approximately three times better than chlorine.
  • Safer Storage: Some bromine compounds (like BCDMH) offer safer storage than gaseous chlorine.
  • Activity at Higher pH: Bromine is more effective than chlorine in alkaline water conditions (e.g., cooling towers) due to the higher stability and efficacy of HOBr compared to OCl−^- at elevated pH.
  • Residual Management: Decay depends on chemical form, demand and contact time. Measure the residual and meet discharge requirements; neutralization may still be needed.

Disadvantages:

  • High Reactivity: Requires higher dosages to maintain adequate disinfection due to its rapid reactivity.
  • Corrosivity: Aggressively reacts with metals and is a corrosive material.
  • Safety Concerns: Requires significant safety measures during transport, storage, and handling due to its toxic and corrosive nature.
  • Disinfection Byproducts (DBPs): Can form brominated disinfection byproducts when reacting with organic matter, which may pose human health risks.

Efficiency and Health Effects

Bromamines formed in ammonia-containing water can have biocidal activity, but efficacy relative to free chlorine must be established for the organism and operating conditions.

Health Effects:

  • Direct Exposure: Bromine vapor is hazardous, and unsuitable pool residuals, pH or byproducts may irritate eyes and mucous membranes. A concentration of 0.5 mg/L (0.5 ppm) is not a universal irritation threshold or a sufficient disinfection target.
  • Organic Bromine: Both natural and manufactured organobromine compounds exist. Hazards differ by compound, dose and exposure route; natural occurrence does not establish safety, and not every compound has the same thyroid, genetic or neurological effects.

Environmental Effects:

  • Microorganism Toxicity: Bromine's efficacy as a disinfectant stems from its toxicity to microorganisms.
  • Aquatic Life: When organic bromine enters surface waters, it can negatively impact aquatic organisms such as water fleas, fish, lobsters, and algae.
  • Brominated Disinfection Byproducts: The reaction of bromamines and hypobromous acid with organic matter in water can form brominated disinfection byproducts, which may be harmful to human health and the environment.

Legislation and Discharge Demands

Regulatory standards for bromine use vary by region and application.

  • Swimming Pools: The earlier 0.7 mg/L (0.7 ppm) French value is not presented as a verified current standard. CDC home-pool guidance gives a typical bromine range of 3-8 ppm, with product instructions and local pool rules controlling the actual requirement; 0.5 mg/L (0.5 ppm) is not a universal irritation limit.
  • Discharge Demands: Water discharged from cooling towers into natural bodies (e.g., rivers, lakes) must meet specific discharge requirements. This often includes limitations on chemical residuals and temperature, as elevated temperatures can reduce dissolved oxygen and promote algal growth, impacting aquatic biodiversity.
  • United States: Discharge demands for cooling tower water are established by the Environmental Protection Agency (EPA) under the Clean Water Act (CWA).

AquaChain Engineering Tip

When using bromine in cooling towers, monitor pH, actual residual and microbiological performance. HOBr can remain important up to approximately pH 8.7, but raising pH does not itself improve disinfection. Validate dosage, contact, biofilm control, material compatibility and the permitted residual at discharge.

Frequently Asked Questions

Q1: Why is bromine not used for drinking water disinfection?

A1: Free bromine is not a routine primary public drinking-water disinfectant. Its demand, taste and brominated byproducts require application-specific evaluation; only approved emergency procedures should be used.

Q2: What are bromamines and how do they function in disinfection?

A2: Bromamines form when active bromine reacts with ammonia. Their speciation, decay and disinfection performance depend on pH, dose and water chemistry; they do not guarantee continual release of hypobromous acid.

Q3: How does pH affect bromine's disinfecting power?

A3: At pH values below 8.7, bromine predominantly exists as hypobromous acid (HOBr), which is a highly effective disinfectant. At higher pH values, it increasingly converts to the less effective hypobromite ion (OBr−^-). This pH-dependent speciation makes bromine particularly suitable for alkaline water systems like cooling towers.


For more information on managing water quality in industrial systems, consider reading about Cooling Towers.

References: RSC bromine history and properties, CDC pool guidance, NIOSH bromine hazards.