Back to Sustainability & ESG

Solutions · Sustainability & ESG

Lithium Recovery from Brine: resource chemistry from concentrated wastewater streams

Selective extraction, pretreatment, and purity paths—what is engineering-feasible versus headline hype.

Engineering knowledge guide2026lithiumbrineresource recoveryIXcircular economy

Use when

Battery demand makes dissolved lithium in reject brines a stranded asset.

Process options

Pretreatment, selective sorbents/resins, and polishing aligned to battery-grade specs.

Assessment output

Mass balance and reagent intensity you can put in front of investors.

Inputs and conditions for an assessment

Collect feed variability, capacity, target quality, operating hours, discharge or reuse boundaries and installed equipment data. Compare examples on matched conditions and meter boundaries; assess a project using actual water data, equipment documentation and any necessary tests.

View the process illustration
Lithium Recovery from Brine: resource chemistry from concentrated wastewater streams water treatment solution illustration

Lithium Recovery from Brine: resource chemistry from concentrated wastewater streams

The global push towards decarbonisation and the electrification of transport is placing unprecedented demand on critical raw materials, none more so than lithium – often dubbed "white petroleum." As the bedrock of electric vehicle batteries and grid-scale energy storage, lithium demand depends on battery deployment, chemistry, and recycling scenarios. This escalating need presents both a challenge and a profound opportunity. Traditional lithium extraction methods, typically from hard rock mining or vast evaporation ponds, are resource-intensive, consuming significant land and water, and carrying substantial environmental footprints that expose supply chains to escalating water risk and carbon emissions.

For UK and EU industries, securing a stable, ethically sourced, and low-carbon lithium supply is rapidly becoming a strategic imperative and a critical ESG gate for market access and investment. Buyers, EPCs, and sustainability officers are increasingly scrutinising the entire lifecycle of components, making sustainable resource recovery not just an environmental choice but an economic necessity. Concentrated industrial brine streams and process wastewaters, often considered liabilities, are now emerging as untapped reservoirs of this vital element. Assess lithium concentration, competing ions, feed availability, legal access, recovery yield, and reagent consumption before treating a waste stream as a recoverable resource.

The Strategic Imperative of Circular Lithium

The inherent water intensity of traditional lithium extraction, particularly from South American salars, creates substantial environmental and social risks. These "water wars" for lithium directly impact local communities and ecosystems, translating into supply chain instability and reputational damage for downstream industries. Furthermore, the carbon footprint associated with energy-intensive mining, processing, and long-distance transport of primary lithium contributes significantly to Scope 3 emissions for manufacturers. By recovering lithium from concentrated industrial wastewater streams, industries can mitigate these risks, reduce their overall carbon and water footprint, and strengthen their resilience against market volatility and stringent regulatory pressures. This approach aligns perfectly with the EU's Critical Raw Materials Act and the UK's Net Zero targets, positioning companies as leaders in the green transition.

Worked energy / carbon sketch

Consider an industrial facility generating a concentrated brine stream from a membrane separation process, containing recoverable lithium. Instead of costly disposal or conventional, energy-intensive primary processing, a Direct Lithium Extraction (DLE) route is evaluated using the illustrative assumptions below.

  • Illustrative flow rate: 50 m³/day of concentrated brine.
  • Illustrative lithium concentration: 300 mg/L (0.3 kg Li/m³).
  • Annual lithium in the feed, before recovery losses: 50 m³/day * 0.3 kg Li/m³ * 330 operating days/year = 4,950 kg Li/year.

Illustrative energy assumptions for purification/concentration to a sellable lithium product; verify equivalent product purity and actual recovery yield:

Annual Energy Savings: (18 kWh/kg Li - 4 kWh/kg Li) * 4,950 kg Li/year = 14 kWh/kg Li * 4,950 kg Li/year = 69,300 kWh/year.

Annual Carbon Savings: Using an illustrative electricity emissions factor of 0.233 kg CO₂e/kWh, not a verified reporting-year UK grid factor: 69,300 kWh/year * 0.233 kg CO₂e/kWh = 16,140.9 kg CO₂e/year ≈ 16.1 tonnes CO₂e/year.

This is an assumed energy comparison, not measured DLE performance or a lifecycle claim. The feed inventory assumes no recovery loss; actual saleable yield, comparable purity, water and reagent use, residual disposal, and the applicable electricity factor must be measured before claiming savings.

Primary supply and onsite recovery

LensSalars / hard-rock supply chainBrine & DLE at the site
Water & landPonds and mining disturb large basins and groundwater narratives.Uses existing concentrated streams where suitable; verify water use and equipment footprint.
Carbon intensityDrill–haul–calcine stack dominates Scope 1–3 story.Electricity + reagents bounded by plant meters; easier to show year-on-year Δ.
Buyer proofLong asset timelines; disclosure is project-led.Pilot-to-scale data: mass balance on Li, impurities, and energy per kg.

References: DOE lithium extraction and conversion technology development; UK official reporting-year emissions factors.

Carbon savings calculator (illustrative)

Estimate annual changes in electricity use and CO₂e emissions from specific energy before and after a change. Replace defaults with site meter data and the grid emission factor required by your utility or ESG methodology.

Annual electricity reduction = flow × annual operating hours × (specific energy before − after). Emissions reduction = electricity reduction × grid factor / 1000. Negative values indicate an increase.

ΔkWh = Q × H × (SEC₀ − SEC₁) · ΔtCO₂e = ΔkWh × EF / 1000

Specific energy reduction: 1.00 kWh/m³

Estimated electricity savings: 800,000 kWh / year

Indicative avoided emissions: 336 tCO₂e / year

These categories typically support the approach above—open any line to compare brands and models.

For a closer review, use the engineering inquiry form to share feed, capacity, target, and project stage. Submission does not constitute a completed design or performance commitment.