WellPro.Z

Summary

Product Identification

The WellPro.Z* is a Z.Plex* technology depth filter engineered specifically for well water injection, produced water disposal, and other oil and gas applications.

Features and Benefits:

• Engineered for well water injection, produced water disposal, and other oil and gas applications.
• Excellent temperature and oil resistance.
• Superior protection of equipment components.
• Optimized exterior decreases premature loading.
• Provides lower total cost of filtration operations.

Applications

• Oil and gas
• Well injection
• Produced water filtration
• Water flood and enhanced oil recovery
• Brine filtration
• Sea water filtration

Mechanical / Hydraulic

Ratings:

• Micron Ratings (nominal): 1, 5, 10, 20 microns
• Inner Diameter (nominal): 1 in (2.5 cm)
• Outer Diameter: 2.5 in (6.4 cm)
• Lengths: 19 1/2 in (49.5 cm), 20 in (50.8 cm), 29 in (74.3 cm), 30 in (76.2 cm), 40 in (101.6 cm). Longer lengths up to 70 in may be available upon request.

Materials of Construction:

• Filter Media: Polypropylene
• Adapters: Polypropylene
• Elastomer: Buna, EPDM, Silicone, Viton (trademark of The Chemours Company)

Performance Conditions:

• Maximum pressure drop:
  • 85 psid (5.9 bar) @ 80°F (27°C)
  • 50 psid (3.4 bar) @ 130°F (54°C)
  • 35 psid (2.1 bar) @ 160°F (71°C)
• Recommended change-out pressure drop: 35 psid (2.4 bar) @ 77°F (25°C)

Efficiency Information

The document references a table for removal efficiency based on a modified ASTM 95 test procedure, indicating removal ratings at 90.0%, 99.0%, and 99.9% efficiencies for 1 µm, 5 µm, 10 µm, and 20 µm nominal filters. The specific tabulated values are not provided in the extracted text.

See the official PDF for exact tabulated values.

Note on Nominal Efficiency: Nominal-rated filters have a wider distribution of pore sizes and rejected particle sizes compared to absolute-rated filters (which reject at least 99% of particles of the listed micron size). Nominal rating is primarily used to compare efficiencies across filter families and between manufacturers, with efficiency dependent on particle shape, size, composition, application, and testing protocol.

Quality & Certifications

Quality:

• Manufactured under an ISO 9001 certified quality management system.
• Each filter is assigned a lot code for traceability of data and materials.

Certifications:

• EU Plastics Regulation No. 10/2011 food contact requirements
• Article 3 of the EU Framework Regulation No. 1935/2004/EC safety requirements
• EU Plastics Regulation No. 10/2011 (may be used as intended in all compliant EU Member states)
• USP class VI-121°C Plastics criteria
• NSF 61 criteria
• ISO 9001 criteria

Veolia filter cartridges are designed for resistance to a wide range of chemical solutions; users should verify chemical compatibility for specific applications.

Ordering Information

The product can be ordered using a structured code: WP.Zs followed by optional fields for Micron Rating, Cartridge Length, End #1 Adapter, End #2 Adapter, and Elastomer Material.

Available ordering options for the WellPro.Z series include:

• Micron Rating (nominal): 01 (1 µm), 05 (5 µm), 10 (10 µm), 20 (20 µm)
• Cartridge Length: 19 1/2 in (49.5 cm), 20 in (50.8 cm), 29 in (74.3 cm), 30 in (76.2 cm), 40 in (101.6 cm). Longer lengths up to 70 in may be available.
• End #1 Adapter: E (222 O-Ring), X (Standard Plain End - no gasket), H (Fin), K (Self Seal Spring), S (Solid End)
• End #2 Adapter: X (Standard Plain End - no gasket)
• Elastomer Material: B (Buna), E (EPDM), S (Silicone), V (Viton)

---

Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the most recent revisions. Contractual data should always match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror