Datasheet summary
Selex
Engineering summary from PDF text extraction for Selex. Verify every value with the OEM datasheet.
Summary
Product identification
Selex is a melt blown depth filter for general industrial use.
Features and Benefits
- Absolute retention ratings for high precision filtration
- Fast rinse-up in high purity applications
- Strict quality control ensures consistent product performance and filtration quality
- Automated packaging for a clean finished product
- Wide chemical compatibility
Applications
- Micro-electronics
- Chemical process industry
- Pure water
- Food and beverage
- Metal finishing
- Potable water
- Pharmaceuticals
- Oil and gas
Operating limits
- Maximum pressure drop: 35 psid (2.4 bar) @ 77°F (25°C)
- Recommended change-out pressure drop: 20 psid (1.4 bar) @ 77°F (25°C)
Specifications
- Ratings (absolute): 1, 3, 5, 10, 20, 30 microns
- Inner Diameter (nominal): 1.0 in (3.1 cm)
- Outer Diameter: 2.5 in (7.0 cm)
- Lengths:
- 9 3/4 in (24.8 cm)
- 20 in (50.8 cm)
- 9 7/8 in (25.1 cm)
- 29 1/4 in (74.3 cm)
- 10 in (25.4 cm)
- 30 in (76.2 cm)
- 19 1/2 in (49.5 cm)
- 40 in (101.6 cm)
- Materials of Construction:
- Filter Media: Polypropylene
- Adapters: Polypropylene
- Elastomer: Buna, EPDM, Silicone, Viton (1), Santoprene (2) (flat gasket only)
Performance
Removal Efficiency at various efficiencies:
| Removal rating (µm) | 90.0% | 99.0% |
|---|---|---|
| 1 µm | 0.8 | 1.8 |
| 3 µm | 1.3 | 3.5 |
| 5 µm | 4.1 | 7.3 |
| 10 µm | 7.0 | 10.0 |
| 20 µm | 15.6 | 20.7 |
| 30 µm | 20.4 | 28.3 |
A graph for Selex clean water flow rate based on a 10 in length filter is mentioned but the data is not extracted here.
Quality and Certifications
Selex filters are manufactured under a quality management system certified to meet ISO 9001 standards. Each filter has a lot code for traceability.
- U.S. FDA 21CFR food contact requirements
- NSF 61 criteria
- ISO 9001 criteria
Veolia filter cartridges are designed for resistance to a wide range of chemical solutions. Users should verify chemical compatibility for each application.
Ordering Information
The ordering code uses the format SXD-29 1/4-YYP. Columns 3, 4, and 5 are optional.
| Column 1: Type | Column 2: Micron Rating (absolute) | Column 3: Cartridge Length | Column 4: End #1 Adapter | Column 5: End #2 Adapter | Column 6: Elastomer Material |
|---|---|---|---|---|---|
| SX | E = 1 µm | 9 3/4 in (24.8 cm) | E = 222 O-Ring | Y = Flat gasket | B = Buna |
| G = 3 µm | 9 7/8 in (25.1 cm) | F = 226 O-Ring | E = EPDM | ||
| D = 5 µm | 10 in (25.4 cm) | L = Extended Core | P = Santoprene (2) | ||
| A = 10 µm | 19 1/2 in (49.5 cm) | X = Standard Plain End (no gasket) | S = Silicone | ||
| C = 20 µm | 20 in (50.8 cm) | Y = Flat Gasket | V = Viton (1) | ||
| F = 30 µm | 29 1/4 in (74.3 cm) | H = Fin | |||
| 30 in (76.2 cm) | K = Self Seal Spring | ||||
| 40 in (101.6 cm) | S = Solid End | ||||
| Longer lengths up to 70 in may be available upon request |
(1) Viton (registered mark of DuPont) (2) Santoprene (licensed to Advanced Elastomer Systems, L.P)
Disclaimer: This summary is based on the provided text extract. The original OEM PDF datasheet may contain additional figures, footnotes, or more recent revisions. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.