Datasheet summary
Pure High Temp Series
Engineering summary from PDF text extraction for Pure High Temp Series. Verify every value with the OEM datasheet.
Summary
Product identification
The Pure HiTemp Depth Filter features meltblown nylon media for extremely high temperature and high viscosity applications.
Features and Benefits
- 100% nylon media with nylon core for greater strength and temperature resistance
- No resin binders, lubricants, antistatic or release agents
- Melt bonded exterior ensures no media migration
- Large chemical compatibility
Applications
- High temperature and high viscosity solutions
- Paints, coatings, printing inks
- Fuels and lubricating oils
- Solvents
- Hot, non-aqueous fluids
Efficiency Information
The filters are nominal-rated. Efficiency varies by application and depends on particle shape, size, composition, and testing protocol. Micron ratings are available from 1 µm to 200 µm. See the official PDF for exact tabulated values regarding removal efficiency based on a modified ASTM 795 procedure.
Operating limits
- Maximum pressure drop (Nylon Core):
- 60 psid (4.0 bar) @ 122°F (50°C)
- 15 psid (1.0 bar) @ 176°F (80°C)
- 7.5 psid (0.5 bar) @ 302°F (150°C)
- Recommended change-out pressure drop: 25 psid (1.4 bar) @ 77°F (25°C)
Mechanical / hydraulic
- Ratings: 1, 5, 10, 25, 50, 75, 100, 125, 150, 200 microns (nominal)
- Inner Diameter: 1.1 in (2.8 cm)
- Outer Diameter: 2.5 in (6.4 cm)
- Lengths:
- 9 ¾ in (24.5 cm)
- 10 in (25.4 cm)
- 19 ½ in (49.5 cm)
- 20 in (50.8 cm)
- 29 ¼ in (74.3 cm)
- 30 in (76.2 cm)
- 39 in (99.1 cm)
- 40 in (101.6 cm)
Materials of Construction
- Filter Media: Meltblown Nylon
- Adapters: Nylon
- Elastomer: Buna, Silicone, Viton¹
Quality and Certifications
Pure HiTemp filters are manufactured under a quality management system certified to meet ISO 9001 standards. Each filter has a lot code for traceability. Veolia filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions, but users should verify chemical compatibility for specific applications.
Ordering Information
The ordering code for the Pure HiTemp (HTN) series is structured as: HTN [Micron Rating]-[Cartridge Length]-[End #1 Adapter][End #2 Adapter][Elastomer Material]
Available Options
- Micron Rating (nominal):
- 01 = 1 µm
- 05 = 5 µm
- 10 = 10 µm
- 25 = 25 µm
- 50 = 50 µm
- 75 = 75 µm
- 100 = 100 µm
- 125 = 125 µm
- 150 = 150 µm
- 200 = 200 µm
- Cartridge Length:
- 9 ¾ in (24.5 cm)
- 10 in (25.4 cm)
- 19½ in (49.5 cm)
- 20 in (50.8 cm)
- 29¼ in (74.3 cm)
- 30 in (76.2 cm)
- 39 in (99.1 cm)
- 40 in (101.6 cm)
- End #1 Adapter (optional):
- A = Open end w/gasket
- E = 222 O-Ring
- F = 226 O-Ring
- X = Standard Plain End (no gasket)
- End #2 Adapter (optional):
- A = Open end w/gasket
- H = Fin
- S = Solid End
- X = Standard Plain End (no gasket)
- Elastomer Material (optional):
- B = Buna
- S = Silicone
- V = Viton¹
¹Viton is a registered mark of The Chemours Company.
Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions. For contractual data, always refer to the official OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.