Muni.Z

Summary

Product identification

The Muni.Z* is a Z.Plex* technology depth filter engineered for municipal water pre-filtration and general industrial applications.

Features and Benefits:

• Engineered specifically for municipal water prefiltration and highly suitable for general applications
• Graded density traps particles throughout
• Lower initial pressure drop than conventional depth filters
• Filter composition contains no resin binders, lubricants, antistatic or release agents
• Melt-bonded exterior ensures no media migration
• Provides lower total cost of filtration

Applications:

• Municipal water systems pre-filtration
• Surface water prefiltration
• Ground water prefiltration
• General industrial use

Nominal Ratings:

• 1, 5 microns (nominal)

Mechanical / hydraulic

Dimensions:

• Inner Diameter (Nominal): 1 in (2.5 cm)
• Outer Diameter: 2.46 in (6.2 cm)
• Lengths:
  • 29 1/4 in (74.3 cm)
  • 30 in (76.2 cm)
  • 39 in (99.1 cm)
  • 40 in (101.6 cm)
  • Longer lengths up to 70 in may be available upon request

Flow Rate:

• A clean water flow rate graph based on a 10 in length filter is provided in the official PDF. See the official PDF for exact tabulated values.

Operating limits

• Maximum pressure drop: 35 psid (2.4 bar) @ 77°F (25°C)
• Recommended change-out pressure drop: 20 psid (1.4 bar) @ 77°F (25°C)

Materials of Construction

• Filter Media: Polypropylene
• Adapters: Polypropylene
• Elastomer: Buna, EPDM, Silicone, Viton, Santoprene (flat gasket only)

Certifications

• Manufactured under an ISO 9001 certified quality management system.
• Each filter is assigned a lot code for traceability.
• Compliance:
  • U.S. FDA 21CFR 177.1520 food contact requirements
  • Article 3 of the EU Framework Regulation No. 1935/2004/EC safety requirements
  • EU Plastics Regulation No. 10/2011 (may be used as intended in all compliant EU Member states)
  • USP class VI-121°C Plastics criteria
  • NSF 61 criteria
  • ISO 9001 criteria

Efficiency Information

Removal efficiency information based on a modified ASTM 795 procedure is referenced. Efficiency of nominal filters varies by application. See the official PDF for exact tabulated values and notes regarding nominal filter efficiency.

Ordering Information

To order, replace the numbers with desired values from each column. Columns 3, 4, and 5 are optional depending on the desired configuration.

Example: Muni.Zs 01-40-ESS

• Type: Muni.Zs
• Micron Rating (nominal):
  • 01 = 1 µm
  • 05 = 5 µm
• Cartridge Length:
  • 29 1/4 in (74.3 cm)
  • 30 in (76.2 cm)
  • 39 in (99.1 cm)
  • 40 in (101.6 cm)
  • Longer lengths up to 70 in may be available upon request
• End #1 Adapter:
  • E = 222 O-Ring
  • F = 226 O-Ring
  • L = Extended Core
  • X = Standard Plain End (no gasket)
  • Y = Flat Gasket
• End #2 Adapter:
  • H = Fin
  • K = Self Seal Spring
  • S = Solid End
  • X = Standard Plain End (no gasket)
  • Y = Flat gasket
• Elastomer Material:
  • B = Buna
  • E = EPDM
  • P = Santoprene (flat gasket only)
  • S = Silicone
  • V = Viton

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror