7 Round HX Housings

Summary

Product identification

• Product Line: 7-Round HX Cartridge Filter Housings
• Construction Material: Stainless Steel
• Accommodates seven cartridge filters in 20-, 30-, 40-, or 50-inch lengths (51, 76, 102, or 127 cm).
• Accepts cartridges up to 2.75-inches (7 cm) in diameter.
• Designed to accept filters with a wide variety of end adapters.

Operating limits

• Liquid Pressure Rating: 150 psig (10.3 bar) at 200° F (93° C)
• Housing Material: 316 Stainless Steel

Mechanical / hydraulic

• General Features:
  • Side Inlet and Bottom Outlet: Side inlet is located below the level of the filters, providing non-impinging flow. The bottom outlet allows the housing to be drained completely and reduces installation space.
  • Universal Cup and Post Sealing: Provides lower seal for cartridge filters with open-end knife-edge type, 222 O-ring, or 120 O-ring end adapters.
  • Hold-Down Plate: Provides upper seal for cartridge filters with patented Hytrex* self-seal spring, open-end knife-edge seal (when used with optional stainless-steel cup and spring adapters).
  • V-Clamp Closure: Simplifies cartridge filter replacement, reducing labor costs and downtime.
  • Tungsten Inert Gas (TIG) Welding: All TIG welding is done at Veolia factories for quality control.
• Connections and Ports:
  • Inlet/Outlet Connections: 2-inch (5.1 cm) MNPT standard; 3" (7.62 cm) optional; Victaulic and flanges optional.
  • Pre- and Post-Filter Gauge Ports: 1/4-inch (0.6 cm) FNPT ports for inlet and outlet pressure gauges.
  • Upstream Vent Port: 1/4-inch (0.6 cm) FNPT.
  • Drain Port: 1/2-inch (1.3 cm) MNPT.
• Other Specifications:
  • O-Ring Material: Buna-N Standard; EPDM, Viton² and Teflon² encapsulated Viton optional.
  • Finish: Satin Finish.
  • Handles: Included on 30-, 40-, and 50-inch (76, 102, or 127 cm) housing domes.
  • Outlet Height Adjustment (with optional stand): Can be as high as 10 inches (25.4 cm) above the floor or as low as 7.5 inches (19.0 cm) below the floor if mounted over a trench.
  • Overall height for cartridge removal: Based on a 5 inches (12.7 cm) base dimension (adjustable). Add 1 inch for housings with flanged ports.
• Housing Specifications by Model:
  • HX0720:
    • Flow Capacity: < 70 gpm (265 Lpm)
    • Weight: 64 lb (29 kg)
    • "A" Length: 40 inch (102 cm)
    • Overall height required for cartridge removal: 54 inch (137 cm)
  • HX0730:
    • Flow Capacity: < 105 gpm (397 Lpm)
    • Weight: 72 lb (33 kg)
    • "A" Length: 50 inch (127 cm)
    • Overall height required for cartridge removal: 68 inch (173 cm)
  • HX0740:
    • Flow Capacity: < 140 gpm (530 Lpm)
    • Weight: 81 lb (37 kg)
    • "A" Length: 60 inch (152 cm)
    • Overall height required for cartridge removal: 88 inch (224 cm)
  • HX0750:
    • Flow Capacity: < 175 gpm (662 Lpm)
    • Weight: 90 lb (41 kg)
    • "A" Length: 70 inch (178 cm)
    • Overall height required for cartridge removal: 108 inch (274 cm)
  • Note: Flow rate is dependent upon cartridge filter selection, fluid properties, and maximum acceptable pressure drop.
• Optional Accessories:
  • HX07 Accessories Kit (includes clamp-on stand, seven spring-cup fittings and a PVC vent valve) - Part Number: 1226015
  • HX07 Clamp-on Stand, 316SS - Part Number: 1162552
  • Spring-cup Fitting, 316SS (necessary for double open-end filters, seven required) - Part Number: 1119540
  • Pressure Gauge, Back Mount, 316SS, ¼” MNPT, 0-100 psig (6.9 bar) - Part Number: 1164157
  • HX07 EPDM Housing Seal - Part Number: 1148053
  • HX07 Viton Housing Seal - Part Number: 1148055
  • HX07 Teflon Encapsulated Viton Housing Seal - Part Number: 1162140

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. For contractual data, always refer to the official OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror