Single Round High Flow SS Housings

Summary

Product identification

These are Single-Round High Flow Cartridge Filter Housings, constructed from stainless steel. They feature a V-band closure design to simplify cartridge filter replacement.

Operating limits

• Liquid Pressure Rating: 150 psig (10.3 bar) at 200° F (93° C)

Mechanical / hydraulic

• Housing Material: 316 Stainless Steel
• Inlet/Outlet Connections:
  • 2-inch (5.1 cm) MNPT standard
  • 3-inch (7.62 cm) optional
  • Victaulic and flanges optional
• Pre- and Post-Filter Gauge Ports: 1/4-inch (0.6 cm) FNPT ports
• Upstream Vent Port: 1/4-inch (0.6 cm) FNPT
• Drain Port: 1/2-inch (1.3 cm) MNPT
• O-Ring Material:
  • Buna-N Standard
  • EPDM, Viton, and Teflon encapsulated Viton optional
• Compatible Cartridges: 40 inch High Flow Z or High Flow RO.Z
• Finish: Satin Finish
• Handles: Included on housing domes
• Model (HXHF01_____-316-A):
  • Flow Capacity: <150 gpm (568 Lpm) (dependent on cartridge filter selection, fluid properties, and maximum acceptable pressure drop)
  • Weight: 64 lb (29 kg)
  • "A" Length: 40 inch (102 cm)
  • "C" Overall height required for cartridge removal: 54 inch (137 cm) (based on B = 5 inches (12.7 cm); add 1 inch for housings with flanged ports)

Features and Benefits

• Stainless Steel Construction: Offers proven corrosion resistance and strength, with an operating pressure up to 150 psig (10.3 bar) at 200° F (93° C).
• Side Inlet and Bottom Outlet: The side inlet below the filter provides non-impinging flow, while the bottom outlet allows complete draining and reduces installation space.
• O-Ring Seal Cup: Ensures a positive O-Ring seal.
• Hold-Down Plate: Keeps the cartridge seated during pressure fluctuations and back pressures.
• V-Clamp Closure: Enables quick and easy cartridge filter replacement, reducing labor costs and downtime.
• Clamp-On Stainless Steel Stand (Optional): A floor mounting stand allows adjustment of housing height and inlet/outlet level, enabling the outlet to be lower than floor level.
• Tungsten Inert Gas (TIG) Welding: All TIG welding is performed at Veolia factories for quality control.

Ordering Information

The model number structure includes: High Flow Filter Housing (HXHF), Number of Cartridges per Housing (01), Cartridge Length (40-inch), Inlet/Outlet Size (2.0-inch or 3.0-inch), Port Type (T=MNPT (standard), V=Victaulic (optional), F=Flange (optional)), Housing Material (316), and V-Band Clamp Closure (A).

Optional Accessories

• Pressure Gauge, Back Mount, 316SS, ¼ “ MNPT, 0-100 psig (6.9 bar)
• HXHF01 EPDM Housing Seal
• HXHF01 Viton Housing Seal
• HXHF01 Teflon Encapsulated Viton Housing Seal
• Clamp on Stand for vertical housing

---

Disclaimer: This summary is based solely on the provided text extract. The original PDF datasheet may contain additional figures, footnotes, or revisions not included here. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror