Memtrex PC

Summary

Product Identification

• Product Name: Memtrex* PC (MPC) filters
• Description: Filters employing a unique polycarbonate track-etch membrane, recognized for precise filtration, broad chemical compatibility, and fast conductivity and TOC rinse-down in ultrapure water systems. They provide high purity filtration for critical electronic, chemical, and highly technical processes.
• Absolute Pore Size Micron Rating: 0.05, 0.1, 0.2, and 0.45 µm.
• Typical Applications:
  • Pure Chemical Filtration
  • Ultrapure Water Filtration
  • Inks and Dyes
  • Plating Solutions

Materials of Construction

• Media: Polycarbonate Track-etch Membrane
• Support Layer: Polypropylene
• Core and Cage: Polypropylene
• Endcaps and Adapters: Polypropylene

Mechanical / Hydraulic

• Nominal O.D:
  • 2.75” (70mm)
  • 1.25” (31mm)
• Effective Filtration Area: 17ft² (1.6 m²)

Operating Limits

• Maximum Forward Differential Pressure: 60 psi (4.1 bar) @ 70°F (21°C)
• Maximum Reverse Differential Pressure: 60 psi (4.1 bar) @ 70°F (21°C)
• Maximum Operating Temperature: 180°F (82°C) at 10 psid (0.69 bar) in water

Product Water

• Aqueous extracts from Memtrex PC filters contain less than 0.25 EU/ml.
• The filters typically exhibit low levels of non-volatile residues.

Additional Information

• The filters may be sanitized with compatible chemical agents.
• Memtrex PC filters meet the test criteria for USP class VI-121°C plastics.
• Chemical compatibility will vary with each application and users should carefully verify it.

Flow Performance

• Flow performance data is based on a 10” length filter. See the official PDF for exact tabulated values.

Ordering Information

• Type: MPC
• Absolute Micron Rating:
  • 85 = 0.05 µm
  • 91 = 0.1 µm
  • 92 = 0.2 µm
  • 94 = 0.45 µm
• Nominal Cartridge Length:
  • 1 = 10 inch (25cm)
  • 2 = 20 inch (51cm)
  • 3 = 30 inch (76 cm)
  • 4 = 40 inch (102 cm)
• End #1 Adapter:
  • A = Open End Gasket
  • B = 120 O-Ring
  • C = 213 O-Ring
  • E = 222 O-Ring
  • F = 226 O-Ring
  • J = 020 O-Ring
  • Q = 222 O-Ring Stainless Steel Support Ring
  • Z = 226 O-Ring Stainless Steel Support Ring
• End #2 Adapter:
  • A = Open End Gasket
  • B = 120 O-Ring
  • C = 213 O-Ring
  • G = Closed End Cap
  • H = Fin Adapter
• Elastomer Material:
  • B = Buna-N
  • E = EPDM
  • S = Silicone
  • T = Teflon² Encapsulated (Only in 222 and 226)
  • V = Viton²

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the OEM PDF datasheet. For contractual purposes, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror