UF Module with Multibore membrane
1 model in this family. Representative models: Dizzer XL 0.9 MB 60 W.
ملف علامة دولية
Inge (DuPont) Ultrafiltration
DuPont Water Solutions is a global water purification and separation portfolio built around recognized technologies such as FilmTec membranes, AmberLite resins, inge ultrafiltration, and related industrial separation materials.
Its influence comes from breadth: the same corporate water platform is used in drinking water, desalination, industrial reuse, pharmaceutical and food processing, electronics ultrapure water, and selective purification.
Inge (DuPont) Ultrafiltration's position in ultrafiltration modules is defined by product families such as UF Module with Multibore membrane, 4" UF Module with Multibore 0.9 membrane, Multibore Membrane and dizzer XL Module with Multibore 0.9 membrane.The portfolio is best understood inside pretreatment, reuse, drinking water clarification, MBR solids separation, turbidity control, and pathogen barrier service, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Dizzer XL 0.9 MB 60 W, Dizzer P 4040-6.0 and Multibore membrane 7.
9
Indexed models
8
Product families
0
Subgroups
خطوط المنتجات ودليل الاختيار
كيفية اختيار UF Modules من Inge DuPont
يجيب هذا القسم عن سؤالين: ما خطوط المنتجات الرئيسية لدى Inge DuPont، وما المعايير التي يجب مقارنتها قبل اختيار الطراز المحدد.
الخطوة 1: اختر خط المنتج حسب التطبيق
تشمل خطوط المنتجات الرئيسية في هذه الصفحة UF Module with Multibore membrane, 4" UF Module with Multibore 0.9 membrane, Multibore Membrane, and dizzer XL Module with Multibore 0.9 membrane. ابدأ بهدف المعالجة وشكل المعدة وظروف التشغيل، ثم استخدم فهرس الطرازات أدناه لمقارنة المواصفات التفصيلية.
الخطوة 2: أكد الطراز بالمعايير الرئيسية
بعد اختيار خط المنتج، قارن module format, flux target, backwash strategy, and chemical tolerance. كما يجب في مشاريع الاستبدال التحقق من شروط التركيب والواجهات والتوافق مع النظام القائم، وفي المشاريع الجديدة مراعاة التشغيل والصيانة وتوفر قطع الغيار أو المواد الاستهلاكية.
Product family overview
Showing 6 main families; all 8 appear in the model index below.
4" UF Module with Multibore 0.9 membrane
1 model in this family. Representative models: Dizzer P 4040-6.0.
Multibore Membrane
1 model in this family. Representative models: Multibore membrane 7.
dizzer XL Module with Multibore 0.9 membrane
2 models in this family. Representative models: Dizzer XL 0.9 MB 60 WR, Dizzer XL 0.9 MB 64 P.
dizzer XL Module with Multibore 1.5 membrane
1 model in this family. Representative models: Dizzer XL 1.5 MB 40 ST.
T-Rack Vario
1 model in this family. Representative models: T-Rack vario 2 /4 rows.
Quick Model Index
Fast lookup for 9 indexed products
Search models, families, applications, or parameters; compare 2–4 candidates, save or export the shortlist, and open it on another device by link or QR code.
Showing 9 of 9 models
Select 2–4 models to compare. Your shortlist is saved on this device and can travel by link or QR code.
Dizzer XL 0.9 MB 60 W
UF Module with Multibore membrane
Retention / pore size: 0.02 µm · Membrame area: 40 m² (430 sq.ft.) · Pore size: approx. 0.02 µm
This Inge Dizzer XL ultrafiltration module features Multibore membranes with a pore size of approximately 0.02 µm.
Dizzer P 4040-6.0
4" UF Module with Multibore 0.9 membrane
Pore size: approx. 0.02 µm · Maximum system pressure: 10 bar (145 psi) · Burst pressure: >10 bar (>150 psi)
The dizzer® P series consists of Ultrafiltration modules designed for small-scale applications, such as Point-of-Use and Point-of-Entry systems.
Multibore membrane 7
Multibore Membrane
Retention / pore size: 20 nm · Pore size: approx. 20 nm · Transmembrane pressure in Filtration: 0.1 – 1.5 bar (1.5 – 20 psi)
This Inge (DuPont) Multibore® membrane module is designed for ultrafiltration with a pore size of approximately 20 nm. It features seven capillaries per fiber.
Dizzer XL 0.9 MB 60 WR
dizzer XL Module with Multibore 0.9 membrane
Pore size: approx. 0.02 µm · Pressure max: 5 bar (70 psi) · Burst pressure membrane: > 10 bar (> 150 psi)
The Dizzer XL 0.9 MB 60 WR is an ultrafiltration module featuring Multibore 0.9 PESM membranes.
Dizzer XL 0.9 MB 64 P
dizzer XL Module with Multibore 0.9 membrane
Membrane area: 64 m² · Pore size: ca. 0.02 µm · Filtration pressure: 0.1 – 1.5 bar
The Dizzer XL 0.9 MB 64 P is an ultrafiltration module designed for water treatment applications. It features a PESM membrane with a pore size of approximately 0.
Dizzer XL 1.5 MB 40 ST
dizzer XL Module with Multibore 1.5 membrane
Active membrane area: 40 m² / 430 ft² · Length incl. T-piece (B): 1879 mm / 74.0 inch · Module diameter (C): 250 mm / 9.8 inch
This Inge (DuPont) Dizzer XL 1.5 MB 40 ST is an ultrafiltration module featuring a Multibore® 1.5 membrane with 40 m² active area.
T-Rack vario 2 /4 rows
T-Rack Vario
Feed/drain header: PVC-U (with fixed flange according to ISO 7005 PN10, ANSI class 150) · Filtrate header: PVC-U (160 mm, with fixed flange according to ISO 7005 PN10, ANSI class 150) · Burst pressure membrane: > 10 bar (> 150 psi)
The T-Rack® vario is an integrated ultrafiltration system offering flexible configurations with two or four rows of dizzer® modules.
T-Rack 3.0-3.2 2 /4 rows
T-Rack 3.0
High Capacity: Supports up to 136 modules per rack · Pore size: approx. 0.02 µm · Burst pressure (membrane): > 10 bar (> 150 psi)
The T-Rack® 3.0 is a robust ultrafiltration rack solution for large-scale systems, integrating dizzer® XL modules with Multibore® membranes. It offers a compact.
T-Rack 3.0 S 2 / 4 rows
T-Rack 3.0 S
Design pressure: 5 bar at 40°C with a service life of 10 years. This corresponds to a design pressure of 8.2 bar at 20°C · Burst pressure (membrane): > 10 bar (> 150 psi) · Permissible temperature range: 1 – 40 °C (34 – 104 °F)
The T-Rack 3.0 S is a compact and robust ultrafiltration system designed for space-saving and mobile applications.
Brand Products & Technical Documents
9 product profiles with integrated document access
Each card keeps the curated model introduction and combines the readable datasheet page, OEM PDF, and official source. Product understanding and document access now share one card set.
UF Module with Multibore membrane
1 product profile
UF Modules
Product profile
Dizzer XL 0.9 MB 60 W
This Inge Dizzer XL ultrafiltration module features Multibore membranes with a pore size of approximately 0.02 µm.
4" UF Module with Multibore 0.9 membrane
1 product profile
UF Modules
Product profile
Dizzer P 4040-6.0
The dizzer® P series consists of Ultrafiltration modules designed for small-scale applications, such as Point-of-Use and Point-of-Entry systems.
Multibore Membrane
1 product profile
UF Modules
Product profile
Multibore membrane 7
This Inge (DuPont) Multibore® membrane module is designed for ultrafiltration with a pore size of approximately 20 nm. It features seven capillaries per fiber.
dizzer XL Module with Multibore 0.9 membrane
2 product profiles
UF Modules
Product profile
Dizzer XL 0.9 MB 60 WR
The Dizzer XL 0.9 MB 60 WR is an ultrafiltration module featuring Multibore 0.9 PESM membranes.
UF Modules
Product profile
Dizzer XL 0.9 MB 64 P
The Dizzer XL 0.9 MB 64 P is an ultrafiltration module designed for water treatment applications. It features a PESM membrane with a pore size of approximately 0.
dizzer XL Module with Multibore 1.5 membrane
1 product profile
UF Modules
Product profile
Dizzer XL 1.5 MB 40 ST
This Inge (DuPont) Dizzer XL 1.5 MB 40 ST is an ultrafiltration module featuring a Multibore® 1.5 membrane with 40 m² active area.
T-Rack Vario
1 product profile
UF Modules
Product profile
T-Rack vario 2 /4 rows
The T-Rack® vario is an integrated ultrafiltration system offering flexible configurations with two or four rows of dizzer® modules.
T-Rack 3.0
1 product profile
UF Modules
Product profile
T-Rack 3.0-3.2 2 /4 rows
The T-Rack® 3.0 is a robust ultrafiltration rack solution for large-scale systems, integrating dizzer® XL modules with Multibore® membranes. It offers a compact.
T-Rack 3.0 S
1 product profile
UF Modules
Product profile
T-Rack 3.0 S 2 / 4 rows
The T-Rack 3.0 S is a compact and robust ultrafiltration system designed for space-saving and mobile applications.