Pall filters

Gasket Material: Alloy of Polypropylene and Ethylene Propylene Diene Monomer (EPDM) (Code H21)

Profile II filter elements are constructed from chemically resistant polypropylene with an absolute-rated downstream section to maximize service life and are suitable for...

Recommended change-out differential pressure: 2.4 bard (35 psid) (Provided maximum differential pressure is not exceeded based on temperature limits) · Gasket/O-ring materials: S (Silicone), N (Nitrile), E (EPDM), V (Fluorocarbon elastomer) · Outside diameter: 6.4 cm (2.5 in)

Pall Claris filter cartridges are high consistency polypropylene melt blown cartridges with a graded pore structure and extruded fibrous core for enhanced strength and...

Outside Diameter: 2" (5.1 cm), 2 3⁄8" (6.0 cm), 2 1⁄2" (6.4 cm), 2 5⁄8" (6.7 cm) optional · Inside Diameter: 1" (2.5 cm) · Photographic: Photo emulsions, chemicals, wash & rinse water

Pall DFT Classic filter cartridges provide reliable particle removal for liquid and gas applications with a graded pore structure.

Maximum Operating Temperature: PTFE is compatible with nearly all chemicals up to 365°F (185°C). Primary exceptions are fluorine, chlorine, and oxygen at temperatures in excess of 212°F (100°C)

DFT Classic Fluoropolymer Series cartridges are depth filters designed for aggressive and high-temperature fluids. These cartridges feature PTFE filter media and core.

Maximum differential pressure: 1.0 bard @ 74°C (15 psid @ 165°F) · Available lengths: 25.1 cm (9.875 in) and 50.8 cm (20 in) · Outside diameter: 11.3 cm (4.438 in)

DFT KK Series Filter Cartridges are large diameter string wound cartridges made from polypropylene fiber for sediment removal.

Retention / pore size: 0.45 to 50 µm · Recommended Change Out Differential Pressure¹: 35 psid (2.4 bard) · Maximum Differential Pressure: 40 psid (2.8 bard) @ 200°F (93°C)

Pall Duo-Fine 1401 Series filter cartridges offer high surface area pleated filtration for critical applications with retention ratings from 0.45 to 50 µm.

Filter Grade (90% Retention Rating by ASTM F-795 Test): 0.2, 0.45, 1, 3, 10, 30, 50 µm (nominally rated) · Recommended Change Out Differential Pressure¹: 35 psid (2.4 bard) · Support Material: Spunbonded Polyester

Pall Duo-Fine E filter cartridges are pleated microfiberglass cartridges for sediment filtration and pretreatment. They offer high dirt-holding capacity.

Recommended Change Out Differential Pressure: 35 psid (2.4 bard) · Support Material: Polypropylene · Outside Diameter: 2 3⁄5" (6.6 cm)

Duo-Fine GT cartridges are high-performance pleated filters designed to protect critical components and extend lubricant life.

Recommended Change Out Differential Pressure: 35 psid (2.4 bard) · Support Material: Spunbonded Polyester · Outside Diameter: 2 3⁄5" (6.6 cm)

Pall Duo-Fine II filter cartridges are designed for efficient particle removal in liquid or gas systems.

Retention / pore size: 0.2 to 50 µm · Recommended Change Out Differential Pressure: 35 psid (2.41 barg) · Support Material: Polyester

Duo-Fine P Filter Cartridges are pleated cartridges made with polyester hardware and borosilicate microfiberglass media, available in retention ratings from 0.2 to 50 µm.

Nominal length: 10" / 254 mm, 20" / 508 mm, 30" / 762 mm, and 40" / 1016 mm · Diameter: 2.75" / 70 mm · Maximum Operating Temperature: 194°F / 90°C

The Emflon filter is an integrity-testable cartridge designed for chemical filtration, featuring a PTFE membrane and polypropylene construction.

Forward Flow (air test gas): 60:40 IPA:Water wet (v:v) ≤10 cc/min at 12 psi (826 mbar) · Max. Differential Pressure/Temp: 60 psid (4.1 bar) to 140°F (60°C) in air/N₂ service or other compatible gases · Max. Steaming Differential Pressure: 5 psid (0.3 barg)

The Pall Emflon II filter is a sterile air membrane cartridge designed for gas filtration and vent service, featuring a proprietary low-pressure drop.

Core Materials Codes: A (304 Stainless Steel), S (316 Stainless Steel), T (Electrolytic Tin Plated Steel), U (Polypropylene) · Cartridge Length Codes: 9.75, 10, 19.5, 20, 29.5, 30, 39, 39.5, 40, 50

Encore® Series filter cartridges are multi-purpose depth filters designed for cost-effective fluid filtration.

Pressure: 0.48 MPa @ 82°C / 70 psid @ 180°F · Dimensions: 0.86 m² / 9.25 ft² (for 254 mm / 10 in length) · Nominal length: 254 mm / 10 in

Fluorodyne VA and TF filters are chemical filtration cartridges designed for rapid bath cleanup in recirculating nickel plating and DI water/alkaline soap baths.

Differential Pressure (Water @ 20˚C / 68˚F): Differential pressure values in psi/gpm and mbar/lpm are provided for each filter grade. See the official PDF for exact tabulated values · Outside diameter: 6.4 cm (2.5 in) · Inside diameter: 2.5 cm (1 in), 3.8 cm (1.5 in)

The Pall HI-V Resin Bonded Series filter cartridges are designed for highly viscous fluids, offering reliable and consistent filtration with negligible media migration.

Maximum differential pressure: 3.45 bard @ 25°C (50 psid @ 77°F) · Recommended change-out differential pressure: 2.4 bard (35 psid) · Maximum operating temperature: 60°C @ 2.8 bard (140°F @ 40 psid)

The M3 DFT Classic Series cartridges are high-capacity depth filters with positive double O-ring sealing and are available in polypropylene or cotton media with various...

Recommended change-out differential pressure: 2.4 bar @ up to 54°C (35 psid @ up to 130°F) · Support material: Spunbonded polyester · Outside filter diameter: 15.2 cm (6 in)

Marksman DFN filter elements are high-capacity pleated glass cartridges designed for demanding filtration applications.

Recommended change-out differential pressure: 2.4 bard @ up to 54°C (35 psid @ up to 130°F), provided the maximum differential pressure based on temperature limits is not exceeded · Outside filter diameter: 15.2 cm (6 in) · Outside flange diameter: Three diameters are available; contact Pall for information on sizes

The Pall Marksman NXA Series are high-capacity melt-blown depth filter elements featuring proprietary CoLD Melt fiber technology and an inside-out flow design.

Recommended change-out differential pressure: 2.4 bard @ up to 54°C (35 psid @ up to 130°F) · Typical Flow (Water @ 20°C / 68°F): See the official PDF for exact tabulated values, which vary significantly by filter grade and cartridge length/size · Support material: Polypropylene

These high-capacity pleated polypropylene filter elements utilize proprietary Poly-Fine II media for consistent filtration. They feature an inside-out flow design.

Recommended change-out differential pressure: 2.4 bard @ up to 54°C (35 psid @ up to 130°F), provided the maximum differential pressure is not exceeded based on temperature limits · Support material: Polypropylene · Outside filter diameter: 15.2 cm (6 in)

Pall Marksman XLD filter elements are high-capacity pleated depth cartridges with proprietary XLD media for contaminant capture.

Maximum Forward Differential Pressure: 50 psid @ 60˚F / 3.45 bar @ 20˚C · Maximum Operating Temperature: 203˚F / 95˚C · Nominal Length: 10" / 25.4 cm, 20" / 50.8 cm

The Pall Mega-Etch filter is a sediment cartridge designed for recirculating etch baths, featuring a patented polysulfone membrane.

Maximum operating temperature: 82.2°C (180°F) · Outside diameter: 6.9 cm (2.7 in) · Inner diameter: 2.5 cm (1 in)

The Pall Micro Carbon II CB filter cartridges are high-efficiency carbon block filters designed for organic, taste, odor, color, chlorine, and particulate removal.

Retention / pore size: 3 µm · C9.75P-PHP/AHP: 198 (7) · C10P-PHP/AHP: 198 (7)

The Micro Carbon II is a filter cartridge designed for liquid and gas applications, offering one-step activated carbon and nominal 3 µm particle reduction.

Maximum Operating Temperature: 125°F (52°C) · Outside Diameter: 2 7⁄10" (6.9 cm) · Inner Diameter: 1" (2.5 cm)

These Pall Micro Carbon II SCC filter cartridges are made with powder activated carbon to reduce sediment, tastes, odors, and chlorine.

Recommended Change Out Differential Pressure: 35 psid (2.4 bard) · Support Materials: Polyester Upstream/ECTFE Downstream (standard), ECTFE Upstream and Downstream · Outside Diameter: 2 3⁄5" (6.6 cm)

The Micropak CF Series are coreless filter elements featuring proprietary melt-blown ECTFE media for pure, high-surface-area filtration.

Recommended Change Out Differential Pressure: 35 psid (2.4 bard) · FDA Listed Materials: Manufactured from materials listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations · Maximum Operating Temperature: 180°F (82°C)

Micropak CLARIS filter cartridges are high consistency polypropylene melt blown cartridges designed for pretreatment applications.

Recommended Change Out Differential Pressure: 35 psid (2.4 bard) · Support Material: Spunbonded Polyester · Outside Diameter: 2 3⁄5" (6.6 cm)

Micropak DF Filter Elements are coreless, microfiberglass cartridges designed for superior filtration performance and long service life.

Lengths: 9 ¾" (24.8 cm), 10" (25.4 cm), 19 ½" (49.5 cm), 20" (50.8 cm), 29 ¼" (74.3 cm), 30" (76.2 cm), 39 ½" (100.3 cm), 40" (102 cm)

Micropak Reusable Center Cores are designed for use with Micropak filter elements and are constructed from 316L stainless steel for broad chemical and temperature...

Filter Grades (>99.9% Retention Rating by ASTM F-795 Test): 0.5, 1, 3, 5, 10, 20, 30, 40, 50, 70, 90, 120 micron (µm) · Recommended Change Out Differential Pressure: 35 psid (2.4 bard) · FDA Listed Materials: Manufactured from materials listed by FDA for food contact applications per Title 21 of the U.S. Code of Federal Regulations

Micropak NEXIS A filter elements are melt-blown micro-fiber depth filters utilizing CoLD Fiber Technology and designed for use with reusable Micropak Cores.

Recommended Change Out Differential Pressure: 35 psid (2.4 bard) · FDA Listed Materials: Manufactured from materials which are FDA listed for food contact applications per Title 21 of the U.S. Code of Federal Regulations · Maximum Operating Temperature: 180˚F (82˚C)

The Micropak NEXIS T filter elements are depth filters utilizing CoLD Fiber Technology and an all-polypropylene construction for high contaminant holding capacity.

Particle Retention: See the official PDF for exact tabulated values for Liquid Service (90% and Absolute Removal Efficiency) and Gas Service (Efficiency By DOP Test) · Recommended Change Out Differential Pressure: 35 psid (2.4 bard) · FDA Listed Materials: Manufactured from materials listed for food contact applications per Title 21 of the U.S. Code of Federal Regulations

The Micropak PF Series filter elements are coreless cartridges made primarily of polypropylene.

Recommended Change-Out Differential Pressure: 35 psid (2.4 bard) · FDA Listed Materials: All materials are FDA listed for food contact applications per Title 21 of the U.S. Code of Federal Regulations · Support Material: Polypropylene

The Pall Micropak WF Series filter elements are coreless cartridges with highly asymmetric polysulfone media, available with absolute retention ratings from 0.05 to 1.

Recommended change-out differential pressure: 2.4 bard (35 psid) · Typical Flow vs. Differential Pressure: Graphs illustrating flow rate versus differential pressure for various filter grades are provided in the source document. See the official PDF for exact tabulated values · Efficiency: Rated at >99.9% efficiency (retention rating by ASTM F-795 test)

Pall Nexis A Series filter cartridges are depth filters utilizing proprietary CoLD Melt™ fiber technology for enhanced particle removal.

Retention rating: >90% by ASTM F-795 test, based on Pall’s Dynamic Efficiency test protocol · Recommended change-out differential pressure: 2.4 bard (35 psid), provided maximum differential pressure is not exceeded · Outside diameter: 6.4 cm (2.5 in)

The Pall Nexis T Filter Cartridges feature proprietary CoLD Melt™ fiber technology for a continuous gradient pore structure and are constructed of thermally bonded...

Maximum forward/reverse differential pressure: 0.41 MPa @ 70°C / 60 psid @ 158°F · Maximum temperature: 70°C / 158°F · Nominal length: 229 mm / 9 in, 254 mm / 10 in, 508 mm / 20 in, 762 mm / 30 in and 1016 mm / 40 in

The P Emflon Filter is a PTFE-based bulk filtration cartridge recommended for photoresists and compatible chemicals. It offers a range of micron ratings.

Oxidizing Atmosphere: 200 °C · Reducing Atmosphere: 1000 °C

Pall Carbo filter elements are binder-free carbon structures manufactured for particle filtration of liquids and gases.

Lengths: 254 mm (10 in), 508 mm (20 in), 762 mm (30 in), or 1016 mm (40 in)

PallCell filters are pleated cellulose media cartridges designed for high-area construction and extended service life in various liquid clarification applications.

Maximum Backflushing Pressure: 6 bar · Material Density: 0.55 g/cm³ · Maximum Temperature: 70 °C

Pall Dia-Filtroplast filter elements are backwashable surface filters constructed from High Density PolyEthylene (HDPE) for liquid and gas applications.

Material density: 1.30 g/cm³ · Bulk Material: Fill for gravel bed filters for filtration and adsorption (e.g., water purification) · Carrier Material: Carrier for catalysts and indicators (e.g., gas detector devices)

Pall Stuttgarter Masse is a micro-porous ceramic substrate available in various grain sizes for filtration, adsorption, and as a carrier material.

Maximum Operating Pressure (Liquid only): 75 psig (5.2 bar) @ 125˚F (52˚C) · Maximum Operating Pressure (Gas only): 40 psig (2.8 bar) @ 100˚F (38˚C) · Shell to Head Sealing Material: Polypropylene, electromagnetically heat sealed (polypropylene wafer, mixed with a small amount of 400 series stainless steel, electromagnetically heated for excellent bond)

The Pall PDF Series filter cartridges are disposable elements designed for safer filtration of hazardous fluids with retention ratings from 0.2 to 100 microns.

Retention Ratings: 1.5, 3, 4.5, 10, 20, 30, 40, 70, 90 micron (µm) · Support Material: Polypropylene · Chemical Compatibility: Capsules resist most acids and bases (pH 1-14), and most oxidizing agents

The Poly Fine XLDC filter capsules are disposable, pleated polypropylene cartridges with retention ratings from 1.5 to 90 microns.

Filter Grades (>99.9% Retention Rating by ASTM F-795 Test): 1.5, 3, 4.5, 10, 20, 30, 40, 70, 90 µm · Recommended Change Out Differential Pressure: 35 psid (2.4 bard) (provided maximum differential pressure is not exceeded based on temperature limits) · FDA Listed Materials: Manufactured from materials which are FDA listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations

The Poly-Fine XLD is an absolute-rated depth filter cartridge featuring proprietary Gel Guard media and an all-polypropylene construction for high efficiency filtration.

Material: Chemically resistant polypropylene, no binder resin used, fibers bound by intertwining (no media migration) · Diameter: 2½ inches

Pall Profile II and Ultipleat Profile filters are versatile sediment and pretreatment cartridges available in an SI configuration with a solid polypropylene endcap and...

Maximum operating pressure: 5.2 bard (75 psid) at 38˚C (100˚F) · Material: Polypropylene for wide chemical compatibility, allowing for cartridge incineration. P and W options are constructed entirely of FDA-listed materials · Low pressure drop: up to one-fifteenth that of conventional depth filters and half that of higher area pleated filters with the same removal ratings

Pall Profile UP Filters are absolute-rated pleated polypropylene cartridges designed for gel and particle removal with exceptional service life.

Outside Diameter: 8.9 cm (3.5") · Inside Diameter: 5.7 cm (2.25") · Length: 98.5 cm (38.75")

The Profile A/S 1401 filter elements are constructed with a polyphenylene sulphide (PPS) media for chemical resistance and elevated temperature use.

Maximum Differential Pressure: 4.0 bard (58 psid)

Profile Coreless filter elements utilize Pall's depth filter technology in a large diameter, coreless design for reduced differential pressure and system size.

Temperature: Designs available for temperatures up to 1250°F with appropriate alloy selection

Pall PSS filter elements are constructed from sintered 316L stainless steel powder for robust, repeatable particle removal and broad chemical compatibility.

Maximum forward / reverse differential pressure: 275 kPa @ 20°C / 40 psid @ 68°F · Maximum operating temperature: 50°C / 120°F · Nominal length: 254 mm / 10 in, 508 mm / 20 in, 762 mm / 30 in, and 1016 mm / 40 in

The Ultipleat P Nylon filter is designed for bulk filtration of photoresists, solvents, and TMAH-based developers compatible with nylon 6,6 and HDPE.

Selection cues: retention rating · rated flow · materials and connections

Ultipor GF Plus filter elements are designed for efficient particulate removal in various fluid applications.

Standard Nominal Outer Diameters: 1⁄2 inch/12.7 mm and 3⁄4 inch/19.05 mm · Standard Lengths: Up to 8 ft/2.43 m long

Pall AccuSep Inorganic Membranes are seamless, tubular microfiltration products designed for demanding liquid and gas applications.

Recommended Change-out Differential Pressure: 35 psid (2.4 bard) · Support Material: Polyester upstream/Halar downstream (standard), or Halar upstream & downstream · Outside Diameter: 2 3⁄5" (6.4 cm)

Chem-Fine Melt Blown Halar Filter Cartridges are high-purity sediment filters designed for demanding chemical and thermal applications, including ultrapure water systems.

Maximum temperature: 180˚F / 82˚C · Diameter: 2.6" / 66 mm

The CMPure and CMPD Series are advanced melt blown depth filter cartridges optimized for Chemical Mechanical Planarization (CMP) slurry systems.

Lengths: 10, 20, 30, and 40 inches · Power Generation Industries: Makeup water, laundry drain wastewater, steam generator blowdown prefilters · Pharmaceutical Industry: Parenterals, ophthalmics, oral medications

The Pall HDC II filter cartridges offer high-area pleated polypropylene media for efficient sediment and pretreatment filtration with extended service life.

Maximum Recommended Changeout Differential Pressure: 60 psid / 4.13 bar at 275˚F / 135˚C · High Pressure Gas Streams: Finer grades remove over 99.98% of solid aerosols, preventing plugging of sensitive instruments or fouling of critical machine components · High Pressure Water Injection and Disposal: Provides reproducible high-quality injection fluids for waterflood and enhanced oil recovery operations, reducing formation damage and increasing sweep efficiency

The MCC 1401 is a high-pressure filter cartridge available with Epocel cellulose or Ultipor glass fiber media for fine filtration of various fluids and gases.

Selection cues: retention rating · rated flow · materials and connections

Pall Aerolith Ceramic Products are porous silicate filter elements designed for high-capacity particle and liquid storage with a labyrinth structure for efficient...

Length (mm): 250 · Width (mm): 250 · Height (mm): 52

Pall Aerolith S is a porous ceramic filter material designed for depth filtration of liquids and gases.

Maximum Operating Differential Pressure: 3.4 bard (50 psid) @ 79°C (175°F) · Outside diameter: 150 mm (6 in) · Inside diameter: 94 mm (3.7 in)

The Pall Marksman 740 Series filter elements are direct retrofits for 740 format industrial filters, offering optimized axial pleat geometry for high-efficiency.

Maximum Pressure: 15 bar · Support Material: α-Al₂O₃ · Porosity (support): Approximately 33 %

Pall Schumasiv ceramic membrane filter elements are tube-shaped and made from pure α-Al₂O₃ with membranes of Al₂O₃, ZrO₂, or TiO₂ for microfiltration and ultrafiltration.

Recommended change-out differential pressure: 2.4 bard (35 psid), provided that the maximum differential pressure is not exceeded based on temperature limits · Support material: Polypropylene · Outside diameter: 6.6 cm (2.6 in)

The Poly-Fine ARD Series filter cartridges are spiral wound, absolute rated depth filters with all-polypropylene components. They offer absolute rated retention from 0.

Recommended Change Out Differential Pressure: 35 psid (2.4 bard), provided maximum differential pressure is not exceeded based on temperature limits · FDA Listed Materials: Manufactured from materials listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations · Support Material: Polypropylene

Poly Fine II filter cartridges offer consistent performance with a rigid polypropylene outer cage and all-polypropylene construction, except for the 0.

Nominal length: 102 mm/4 in, 254 mm/10 in, 508 mm/20 in, 762 mm/30 in, and 1016 mm/40 in · Diameter: 66 mm/2.6 in · Maximum operating temperature: 30°C / 86°F (70°C / 158°F only in deoxygenated water systems; otherwise use Varafine T filters)

The Varafine VFSE Series filters are fine-rated sediment cartridges designed for ultrapure DI water applications, featuring a patented double-layer polysulfone membrane.

Filter Grades (>99.9% Retention Rating by Standard Latex Bead Challenge): 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2 µm · Retention / pore size: 0.05 to 1.2 µm · Recommended Change Out Differential Pressure: 35 psid (2.4 bard) (provided that the maximum differential pressure is not exceeded based on temperature limits)

Varifine VFSG filter cartridges are high-flow sediment filters with an absolute rated efficiency of >99.9% and available retention ratings from 0.05 to 1.2 µm.

Support Material: Polypropylene · Outside Diameter: 2.6" (6.6 cm) · Lengths (tip-to-tip): 4" (10.2 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (102 cm)

The Pall VARAFINE VFTR Series cartridges are designed for critical filtration of solvents and aggressive liquids.

Recommended change-out differential pressure: 35 psid (2.4 bard) (provided maximum differential pressure is not exceeded based on temperature limits) · Gasket/O-ring materials: Silicone (standard O-rings), EPDM, Fluorocarbon elastomer, Nitrile (standard gaskets), FEP encapsulated silicone, No O-ring required (M2 only) · Support material: Polypropylene

The Water-Fine Series filter cartridges are designed for DI and high purity water applications.

Retention Efficiency: >99 % @ 0.5 micron (typical) per ASTM F 795 test · Support material: Ethylene-Propylene Diene Monomer (EPDM) · Continuous Operating Temperature: 75 °C (167 °F)

Zefluor Elements are tubular back-pulse filters utilizing GORE ePTFE membranes for brine filtration and other liquid processes.

Pressure: 8 – 10 barg (depending on module selected) · Differential Back Pressure: 8 bard · Membrane Materials: Ultrapure, α alumina, zirconia, and titania. All are FDA-listed for pharmaceutical processes

Pall's Membralox ceramic membrane elements are designed for extreme biopharmaceutical processes requiring significant durability.

Pressure (in aqueous liquids): 10 bar · Construction of wetted materials: 316L SS, ceramic, EPDM or FPM · Filtration surface area: up to 10.2 m²; up to 13 m²

The Membralox SD Sanitary Module is a ceramic membrane system designed for cost-effective separations in various food, beverage, and pharmaceutical applications.

In-To-Out Flow Path: Reduces the chance of cross-contamination during filter element change · Flow Fatigue (ISO 3724): Contact factory; filter element pleats are fully supported to achieve excellent fatigue cycle life · Flow vs. Pressure Drop (ISO 3968): See appropriate Ultipleat SRT housing literature

Ultipleat SRT Filters are sediment and pretreatment cartridges designed for superior contamination control and enhanced performance under cyclic flow conditions.

Flow vs. Pressure Drop: ISO 3968 · Flow Fatigue: ISO 3724 · Element Collapse Pressure Rating: ISO 2941

Coralon filters are advanced SRT media elements designed as direct replacements for Pall Ultipor hydraulic and lube filter elements. They feature an out-to-in flow path.

Maximum Operating Pressure: -1 to 10 bar g / -14.5 to 150 psi g (Full Vacuum, With compatible fluids, which do not soften, swell or adversely affect the materials) · Gasket Material: Silicone elastomer (other materials available upon request) · Maximum Operating Temperature: 150°C (300°F)

The Pall Advanta Liquid Filter Housings are advanced, crevice-free stainless steel housings for sanitary applications in pharmaceutical, biotech.

Typical Flow Rates³: For typical clean differential pressure per 254 mm (10") cartridge with air at 20 °C (68 °F), refer to the flow rate graphs in the official PDF · Sodium chloride aerosol challenged for particle removal to 0.003 micron: Ensures high particle removal efficiency in dry gas · Nominal Filter Area: 0.8 m² (8.6 ft²) per 254 mm (10") module

Emflon PFRW Filter Cartridges are sterilizing-grade hydrophobic PTFE membrane filters for compressed gas and vent applications.

Typical Flow Rates: 20 L/min @ 70 mbar (5.2 USgpm @ 1 psid) · Nominal Filtration Area: 0.6 m² (6.5 ft²) per 254 mm (10”) module · Support and Drainage: Polypropylene

The Pall Fuente Colloids Filter Cartridge is designed for effective particulate colloid removal from process water, particularly in the beverage industry.

Support and Drainage: Polyester

Ultipor N66 Filter Cartridges are designed for microbial reduction and stabilization in food and beverage applications, featuring pleated nylon 6,6 media.

Maximum Temperature: 134 °C (273 °F)

PREcart PP II filter cartridges are pleated polypropylene depth filters designed for particle removal in food and beverage applications.

Flow Rate/Module: ≤ 5000 liters/hour (22 gal/min) · Max Differential Pressure (forward): 1.5 bard (21.7 psid) · Initial Differential Pressure⁹: ≤ 400 mbar (5.8 psid)

SUPRApak SW Series modules are enclosed depth filters designed for high throughput in closed systems, combining surface filtration, depth filtration, and adsorption.

Selection cues: retention rating · rated flow · materials and connections

Profile Star Filter Cartridges are pleated depth filters designed for high particle and gel removal in food and beverage applications.

Felt, 1 & 3 Micron: 80 GPM · Felt, 5 THRU 200 Micron: 120 GPM · Mesh, 1, 3, 5 & 100 Micron: 100 GPM

Standard Felt Filter Bags are designed for higher solid loading applications and are available in Polypropylene, Polyester, Nylon, High Temperature.

1 & 3 Micron Rating: 80 GPM · 5 THRU 200 Micron Rating: 120 GPM · 1, 3, 5 & 100 Micron Rating: 100 GPM

Polyweld Filter Bags are sediment filter cartridges featuring welded seams to eliminate bypass and fiber migration, available in polypropylene or polyester felt.

1 & 3 Micron: 80 GPM · 5 through 200 Micron: 120 GPM · Available Materials: Polypropylene, Polyester

The Pall Extended Life filter bags (POEX/PEEX) are designed for outstanding performance on gels and irregular particles with a coarse inner layer for high contaminant...

Felt 1 & 3 micron: 80 GPM · Felt 5 THRU 200 micron: 120 GPM · Specific Gravity: 0.9

The Pall MAX PONG filter bag is a heavy-duty, extended-life cartridge designed for high-efficiency, low-cost filtration in both continuous and batch applications.

Flow Rate (suggested maximum): 45-50 GPM (with filter elements installed; actual maximum flow rate without filters is not specified but will be higher) · Pressure Rating: 100 PSIG @ 110 °F Water Service · Available in two pressure ranges: 6-8 PSID or 15-20 PSID

The FSI X100 is a versatile filter housing constructed from durable polypropylene with UV inhibitors, convertible for bag or cartridge filtration. It features a tool-free.

Micron Rating: 5, 10, 25, 50, 100 · For 5, 10, 25, 50, 100 micron ratings: 120 GPM/#2 BAG · Available Materials: Polypropylene Extended Life Felt

The Pall PolyFold™ filter bag is a proprietary filtration solution constructed of dual-sided extended life felt for maximum dirt holding capacity.

Construction Material: Polypropylene microfiber · Maximum Operating Temperature: 160° F (93° C) · Specific Gravity: 0.9

The Pall POMF filter bag features a triple-layer proprietary polypropylene microfiber construction for high filtration efficiency and hydrocarbon adsorption.

Absolute (98%) Micron Rating: 3, 5, 10, 25, 35, 50, 75, 100 · Available Materials: Polypropylene · Maximum Operating Temperature: 160° F (71° C)

The BOS filter bag is a seamless Polymicro® filter made from thermally bonded microfibers for absolute-rated filtration from 3 to 100 microns.

Absolute (98%) Micron Rating: 3, 5, 10, 25, 50, 75, 100, 125 · 1A and 2A Micron Ratings: 60 GPM · 10A, 25A, 90A & 0A Micron Ratings: 80 GPM

The BOS Gradient Filter Bag is a seamless, absolute-rated filter element made from 100% polypropylene microfiber designed for depth filtration.

Absolute (98%) Micron Ratings: 3, 5, 10, 25, 35, 50, 75, 100 · 1A and 2A micron ratings: 60 GPM · 10A, 25A, 90A & 0A micron ratings: 80 GPM

The Pall BOS MAX Filter Bags are seamless, absolute-rated, heavy-duty filter bags designed for high-purity applications with a unique semi-rigid microfiber insert.

Micron Rating 1, 3, 5 & 100: 100 GPM · Micron Rating 25 THRU 100: 125 GPM · Micron Rating 150 THRU 800: 150 GPM

FSI Mesh Filter Bags are constructed from woven or knitted fabrics like nylon monofilament, polyester multifilament.

Maximum Differential Pressure² (normal inside to outside flow): 50 psid (3.44 bar) at 250˚F (121˚C) · Maximum differential pressure across tubesheet: 75 psid (5.17 bar) maximum · Wrap Materials: Polyester and Polyamide

The Pall Ultipleat High Flow XL filter system is a large-diameter, coreless, pleated cartridge designed for high-flow applications.

Patented Support Tube Elements: Made of chlorinated polyvinyl chloride (CPVC), these elements ensure equal flow distribution, high flow rates, and optimal cleaning, and are easily inspected and replaced · Greater Capacity: Elimination of the pre-coat step allows the filter to be online longer, processing more brine

The Zylon Backwash Filtration System is a brine polishing solution that replaces conventional clarifiers, sand filters, and pre-coat systems.