Pentair RO Membranes

Maximum operating pressure: 150 psi · Maximum operating temperature: 120°F

These Structural Polyglass Vessels are designed for residential and light commercial water treatment.

Maximum operating pressure: 150 psi · L: 4.1" · I.D: 4.0"

These are structural composite pressure vessels made from reinforced fiberglass, suitable for commercial and industrial water treatment. They will not rust.

Operating Pressure: 150 PSI / 10.34 bar

This STRUCTURAL Composite Pressure Vessel is designed for large commercial and industrial applications including softening, filtration, and storage.

Maximum operating pressure: 150 psi · Maximum operating temperature: 120°F

These Poly-Glass vessels are designed for residential and light commercial water softener and filtration applications.

Maximum operating pressure: 150 psi · Material of construction: Polyester, Vinylester

These Structural FRP vessels are designed for residential and light commercial water treatment.

Capacity (Gallons / Liters): .. · Maximum operating pressure: 150 psi · Maximum operating temperature: 120° F

Structural Poly Glass™ pressure vessels are designed for residential and light commercial water softener and filtration applications.

Operating Pressure: Min 0 bar - Max 10 bar

Pentair RO Membranes Structural Pressure Vessels are corrosion-free composite tanks for water treatment and storage. They are approximately 50% lighter than steel tanks.

Permeate Tubing: 1.22 meters of 9.53 mm blue tubing (4 feet of 3/8" blue tubing) · Flow Adjustment Based on TDS: Estimated Flow Change from 750 ppm NaCl/RO = -0.0002 (TDS) + 0.15 · Performance - Flow Rate Characteristics: Graphs illustrating flow rate characteristics at 50°F, 65°F, and 80°F based on 750 ppm TDS inlet water and driving pressure (psi) are available in the PDF

The Pentair Water® PRF-RO is a reverse osmosis system designed for continuous flow, eliminating the need for electric pumps or storage tanks in most applications.

Pressure range: 2.07-8.6 bar (30-125 psi)

The Pentair RO 2500 is a reverse osmosis system designed for residential point-of-use drinking water applications.

TDS rejection: 90% @ 2 bar inlet · Tank capacity max: 16.5 L · Pressure range: 1.4–6.9 bar

The Pentair RO-2600 is a 5-stage reverse osmosis system designed for producing high-purity water.

Maximum capacity: 2,000 or 3,000 l/h (530 to 800 gallons per hour) · Power supply: Direct electricity or a gas-powered generator · Dimensions (m): 1.2 x 0.8 x 2.3

The Water Miracle is a compact, decentralized ultrafiltration system designed by Pentair X-Flow to produce high-quality drinking water from fresh surface water It...

Initial ΔP @ Flow Rate: 11 psi @ 1 gpm (0.76 bar @ 3.8 Lpm) (based on manufacturer's internal testing) · Operating Pressure Range: 5-88 psi (0.35-6.1 bar) max · Maximum Pressure Differential: 88 psi (6.1 bar) max

The Pentair MicroGuard MG-10MCB is a reverse osmosis and nanofiltration membrane element designed for safer drinking water with integral carbon block and sediment...

Transmembrane pressure: -20 .. + 1000 kPa · Temperature: 1 - 70 °C · Tubular Membrane Diameter: 14.4 mm

The X-Flow-B-0125 is an advanced tubular ultrafiltration membrane element for industrial food and non-food applications.

Max. permeate pressure: 1000 kPa · Permeate connection d0/d1: 26/19 mm · Permeate length I0: 75 mm

The Pentair X-Flow Compact 1.2 is an ultrafiltration membrane element designed for effluent treatment and membrane bioreactor applications.

Permeate connection d0/d1: 26/19 mm · Permeate length I0: 75 mm · Permeate position I1: 66 mm (±1)

This X-Flow-Compact-1-6 -5-2MM is a hydrophilic tubular polyvinylidene fluoride ultrafiltration membrane element designed for large-scale water purification with good...

Permeate connection d1: 1 inch · Permeate length I0: 80 mm · Permeate position I1: 66 mm (±1)

This Pentair X-Flow-Compact-4-0G is an ultrafiltration membrane element designed for effluent treatment and membrane bioreactor applications.

Permeate connection d1: 1 inch · Permeate length I0: 80 mm · Permeate position I1: 66 mm (±1)

This X-Flow-Compact-5-1G-5-2MM is an ultrafiltration membrane element designed for large-scale water purification with excellent anti-fouling properties and...

Permeate connection d0: 73.0 mm · Permeate length l0: 165 mm (±1) · Permeate position l1: 90 mm (±1)

The Pentair X-Flow Compact 22V is an 8-inch ultrafiltration membrane element designed for various water purification applications including pre-treatment.

Max. permeate pressure: 1250 kPa · Feed-permeate differential pressure: -20 ~ +250 kPa (at 20 - 60 °C) · Permeate connection d0: 73.0 mm

The Pentair X-Flow Compact 27G Helix is an ultrafiltration membrane element designed for effluent treatment, membrane bioreactors, and large-scale water purification.

Permeate connection d0: 73.0 mm · Permeate length I0: 40 mm (±1) · Permeate position I1: 90 mm (±1)

This is a Pentair X-Flow Compact 27G ultrafiltration membrane element with a hydrophilic polyvinylidene fluoride membrane on a polyester/polyolefine carrier.

Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1) · Permeate position I1: 90 mm (±1)

The Pentair X-Flow Compact 27 Helix is an 8-inch ultrafiltration membrane module designed for effluent treatment and membrane bioreactor applications.

Retention / pore size: 30 nm · Max. Permeate Pressure: 650 kPa at 20 °C · Permeate connection d0: 73.0 mm

This is a Pentair X-Flow-Compact-27 ultrafiltration membrane element with a mean pore size of 30 nm, suitable for effluent treatment and membrane bioreactor applications.

Max. permeate pressure: 1250 kPa (at 20-60 °C) · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

The X-Flow-Compact-33G-Helix is an ultrafiltration membrane element designed for large-scale water purification processes.

Max. permeate pressure: 60 kPa (at 20-60 °C) · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

This is a Pentair X-Flow Compact 33G tubular ultrafiltration membrane module with a 33 m² membrane area.

Max. permeate pressure: -100 ~ +250 kPa · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

The Pentair X-Flow Compact 33 Helix is an 8-inch ultrafiltration membrane element with a Helix structure designed for high performance and reduced fouling in various...

Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1) · Permeate position I1: 90 mm (±1)

The X-Flow Compact 33 is an ultrafiltration membrane element for water purification, with applications in pre-treatment, wastewater treatment.

Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1) · Permeate position I1: 90 mm (±1)

The X-Flow-Compact-33V-Helix is an 8-inch ultrafiltration membrane element with a hydrophilic tubular polyvinylidene fluoride membrane and a Helix surface structure for...

Retention / pore size: 30 nm · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

This Pentair X-Flow Compact 33V is an 8-inch ultrafiltration membrane element with a 30 nm mean pore size and PVDF membrane material.

Permeate position: 290 mm · Permeate length: 250 mm · Permeate connection ID: 65 mm

This Pentair X-Flow Compact 75G Helix is an ultrafiltration membrane element with a 75 m² membrane area.

Max. permeate pressure: 600 kPa · Feed-permeate differential pressure: -100..+250 kPa · Permeate position: 290 mm

The X-Flow Compact 75G is a Helix Ultrafiltration membrane element designed for various water purification applications, including pre-treatment for RO/NF, surface water.

Retention / pore size: 30 nm · Max. permeate pressure: 1250 kPa · Permeate connection d0: 73.0 mm

This Pentair X-Flow Compact 75G non-coded membrane element features a hydrophilic polyvinylidene fluoride tubular membrane with a 30 nm pore size.

Nominal pore size: 25 nm · Transmembrane pressure: -20 to +300 kPa · Temperature: 1 - 70 °C

This X-Flow-F-0285 is a classic ultrafiltration membrane element featuring a hydrophilic tubular polyvinylidene fluoride membrane for industrial food and non-food...

Silica retention: Typical > 99.8% for colloidal silica (tested on surface water containing 10 mg/l total silica and 1 mg/l colloidal silica) · Permeate connection d0: 42.6 mm (1.68 Inch) · Typical permeate quality: SDI<3, turbidity <0.1 NTU

The Pentair X-Flow HFS 60 is a tight ultrafiltration membrane element designed for colloidal silica removal from surface water.

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate connection d0: 42.6 [1.68] mm/Inch · Crossflow flow rate: 19.8 x v [26 x v] m³/h/gpm (where v is superficial velocity in m/s [ft/s])

This is an 8-inch PVC housing X-Flow HFW 1000 nanofiltration membrane element designed for process and potable water production with minimal salt retention.

Retention / pore size: 20 nm · Permeate Length B: 71 mm / 2.8 inch · Permeate Position C: 87 mm / 3.4 inch

The X-Flow R21 0.9UFC is an ultrafiltration module made from a PES/PVP blend, suitable for process water production and featuring a nominal pore size of 20 nm.

Typical Permeate Quality: SDI<3, turbidity <0.1 NTU · Permeate Length B: 71 mm [2.8 inch] · Permeate Position C: 87 mm [3.4 inch]

This Pentair X-Flow R-21 HFS is an ultrafiltration membrane module used for producing process water from surface water or WWTP effluent.

Permeate port protrusion l1: 112 mm · Permeate port lateral recess l0: 125 mm · Permeate side: Coupling: DIN 11851, 65 NW

This Pentair X-Flow R-100 MF is a microfiltration membrane element designed for filtering aqueous solutions and beverages in crossflow mode.

Membrane area: 0.08 m² [0.86 ft²] · Pressure-drop across module at 1 m/s: 11 kPa [1.6 psi] · Pressure-drop across module at 2 m/s: 24 kPa [3.5 psi]

The X-flow RX-300 0.9UFC is an ultrafiltration pilot module for producing process and potable water from surface water, potable water, and WWTP effluent.

Membrane area: 0.04 m² [0.46 ft²] · Pressure-drop across module at 1 m/s: 4 kPa [0.6 psi] · Pressure-drop across module at 2 m/s: 17 kPa [2.5 psi]

The X-Flow-RX300-1-5UFC is an ultrafiltration pilot module for process and potable water production, featuring PES/PVP membrane material within a PSF housing.

Flow rate: 0.27 x v [1.19 x v] where 'v' is superficial velocity in m/s [ft/s] · Membrane area: 0.08 m² [0.86 ft²] · Max. temperature: 60 °C [140 °F]

This Pentair X-Flow-RX300-09UFC is an ultrafiltration pilot module designed for process and potable water production.

Permeate connection D3: 50.5 (32) [mm] · O-ring (Permeate, Type 1 and 2): EPDM (Art. No. 32040) · Membrane area: 9.8 [m²]

The X-Flow S-14 is a microfiltration membrane module designed for beer clarification using a feed and bleed crossflow operation with backwash and CIP.

Transmembrane pressure: -20 .. +1000 kPa · Temperature: 1 - 70 °C · Hydrolic diameter: 14.5 mm

The X-Flow S 0325 is a tubular polysulfone ultrafiltration membrane for industrial food and non-food applications. It offers a molecular weight cutoff of 100.

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate connection d0: 42.6 mm [1.68 Inch] · Crossflow flow rate: 26.9\v m³/h [36\v gpm] (where v = superficial velocity in m/s [ft/s])

The X-Flow-Seaflex-64 is an ultrafiltration membrane module designed for seawater reverse osmosis pre-treatment.

Permeate collector inner diameter d₀: 42.6 mm [1.68 Inch] · Nominal Pore Size: 20 nm · Membrane area: 40 m² [430 ft²]

The X-Flow Seaguard 40 is an ultrafiltration membrane element designed for seawater reverse osmosis pre-treatment.

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate connection d0: 42.6 mm [1.68 Inch] · Membrane area: 55 m² [590 ft²]

The Pentair X-Flow Seaguard 55 is an ultrafiltration membrane element designed for pretreatment in seawater reverse osmosis systems.

Permeate Connection Diameter (d0): 42.6 mm [1.68 Inch] · Nominal Pore Size: 20 nm · Effective Membrane Area: 64 m² [687 ft²]

This Pentair X-Flow Seaguard 64 is an ultrafiltration membrane element designed for pretreatment in seawater reverse osmosis applications.

Permeate Collector Inner Diameter (d0): 42.6 mm [1.68 inch] · Nominal Pore Size: 20 nm · Membrane Area: 40 m² [430 ft²]

The Xiga 40 is an ultrafiltration membrane element designed for process and potable water filtration in dead-end operation.

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate connection d0: 42.6 mm [1.68 Inch] · Pore size: A nominal pore size of 20 nm

The Pentair X-Flow XIGA 55 is an Ultrafiltration (UF) membrane element designed for process and potable water filtration, offering 55 m² of surface area.

Retention / pore size: 20 nm · Permeate Connection (d0): 42.6 mm / 1.68 Inch · Nominal Pore Size: 20 nm

This Pentair X-Flow Xiga 64 is an ultrafiltration membrane element with a nominal pore size of 20 nm, designed for process and potable water filtration.

Selection cues: rejection · permeate flow · membrane area and operating pressure

The Pentair RO 2500 is a reverse osmosis membrane element designed for drinking water applications.

Selection cues: rejection · permeate flow · membrane area and operating pressure

The Pentair RO-2600 is a reverse osmosis membrane element designed for drinking water applications.