Pentair STA-RITE

Single-phase power supply: With capacitor permanently on and thermal protection built into the motor casing · Three-phase power supply: With external protection provided by the user · Maximum suction height recommended: 5 m with foot valve

The CB Series are two-stage horizontal centrifugal pumps designed for high hydraulic performance in pressurization and washing systems. Materials vary by model.

Speed of rotation: 2850 rpm · Single-phase power supply: With capacitor permanently on and thermal protection built into the motor casing · Three-phase power supply: Requires external protection provided by the user

The Pentair STA-RITE CM Series is a line of single-impeller horizontal centrifugal pumps designed for irrigation, pressurization, and domestic water supply.

Maximum rated power: 11 kW · Degree of protection: IP55 (if installed on motors with IP55 or above) · Ambient temperature: +0°C to +50°C

The CPS10 is an electronic device that integrates an inverter directly on the motor to adjust pump speed for constant pressure maintenance, suitable for irrigation.

Speed of rotation: 2850 rpm · Maximum liquid temperature: 90°C · Maximum recommended suction height: 6 m with foot valve (when liquid temperature is at most 50°C)

The Pentair STA-RITE DHI 2 is a horizontal multistage centrifugal pump constructed from Stainless Steel AISI 316, suitable for domestic water systems, pressurization.

Speed of rotation: 2850 rpm · Single-phase power supply: Includes capacitor permanently on and thermal protection built into the motor casing · Three-phase power supply: Requires external protection provided by the user

The DHR 4 is a horizontal, non-self-priming multistage centrifugal pump designed for domestic water lifting, distribution, and pressurization systems.

Motor speed of rotation: 2850 rpm · Power supply: Single-phase models feature a capacitor that is always on · Maximum temperature of the liquid: 40°C

The Dominator 5" is a multistage submersible pump constructed entirely from stainless steel, designed for clear water applications in wells, tanks, and watercourses.

Power Supply: 1 ~ 230 V or 3 ~ 400 V · Frequency: 50 Hz

The Easyboost is a residential pressure booster set designed for automatic water system pressurization, featuring pressure switch control and single-phase power supply.

Rated flow (m³/h): 1, 3, 5, 10, 15, 20, 32, 45, 64, 90, 120, 150 · Range of flow rate (m³/h): 0.7-2.4 up to 75-180 (depending on model) · Pump head cover: Stainless steel (EN 1.4301/AISI 304 for PVMI, EN 1.4401/AISI 316 for PVMX)

The PVM, PVMI, and PVMX series are non-self-priming vertical multi-stage centrifugal pumps designed for various applications including water supply, pressurization.

Rotation speed: 2850 rpm · Power supply: Single phase with permanently activated capacitor · Maximum liquid temperature: 50°C

The Jetinox pumps are self-priming centrifugal units designed for domestic water distribution, pressure boosting, and irrigation.

Rotation speed: 2850 rpm · Single phase power supply: With permanently activated capacitor and thermal cutout protection incorporated in the motor winding · Three phase power supply: With external protection to be fitted by the user

The Pentair STA-RITE Jet / Newjet series are self-priming centrifugal pumps designed for domestic water lifting and distribution.

Maximum ambient temperature: 40°C · Maximum temperature of the liquid: 50°C · Maximum operating pressure: 8 bar

The Multi EVO-A is a self-priming, horizontal, multistage centrifugal pump designed for pressurization, irrigation, and washing systems.

Speed of rotation: 2850 rpm · Maximum liquid temperature: 50°C · Maximum recommended suction height: 6 m with foot valve

The Pentair STA-RITE Multinox VE+ is a vertical multistage centrifugal pump designed for efficient, quiet domestic water lifting, pressurization, and irrigation.

Maximum ambient temperature: 40°C · Temperature of pumped liquid: -10°C to +130°C · Maximum operating pressure: 10 bar

The NRM2 is a single-stage, monobloc centrifugal pump designed for heating, cooling, and water supply applications. It features a cast iron pump body and motor casing.

Piping material: Stainless steel AISI 304 · Maximum operating pressure: 16 bar · Ambient temperature: 50° C

The Pentair PRESSOMAT PMS20 PVM is an automatic pressure booster set for pressurizing distribution networks.

Motor Voltage: 115/230 V

The Pentair STA-RITE PN Series is a self-priming shallow well jet pump designed for wells with pumping levels of 25 feet or less.

Max. Liquid Temperature: 140°F · Max. Inlet Pressure: 50 PSI · Motor Voltage: 115/230 V (all models)

The Pentair STA-RITE ProJet SN Series are self-priming shallow well jet pumps made of cast iron for homes and farms.

Power Cable: Extractable, approximately 1.75 m in length · Speed of rotation: 2850 rpm · Maximum liquid temperature: 35°C

The SCM 4 Plus is a 4-inch multistage submersible pump designed for lifting water from deep wells and various irrigation and supply applications.

Energy Efficiency: Reduced amp draw, over 25% less amp draw (e.g., 9.5 amps vs. 12.7 amps for 115 volt models) compared to a standard 4” NEMA submersible · Outer Diameter: 3.86" (98 mm)

The ST.E.P. Plus 4" Multistage Submersible Effluent Pumps are designed for clean and gray water applications in residential, commercial, and agricultural settings.