Flygt Pumps

Power: 2.4 kW

The Flygt JT 4710 is a jet mixer designed for contaminated water and sludge, featuring an engineered ejector system and a dry-installed Flygt N-pump.

Nominal power: 7.3 kW · Set power: 7800 W · Power Supply: 24 V DC

The Concertor DP N80-7800 is a process-controlled wastewater pumping system featuring integrated gateways and specialized control algorithms.

Nominal power: 7.3 kW · Set power: 7800 W · Power Supply: 24 V DC

The Concertor DP N100-7800 is a process-controlled wastewater pumping system featuring a grey cast iron impeller and a semi-permanent installation type.

Maximum Flow Rate (from performance curve): Approximately 360 m³/h · Maximum Head (from performance curve): Approximately 16.5 m · Nominal Power: 5.5 kW

The Concertor DP N150-5850 is a process-controlled wastewater pumping system featuring multiple pumps and a gateway per pump.

Flow meters: MagFlux · Water temperature: Used up to 70°C · Liquid temperature: Maximum 40°C (104°F)

The Concertor™ N/EA/DP series are intelligent wastewater pumping systems designed for sustained high efficiency. These pumps.

Flows: Up to 16,000 US GPM (1,000 l/s) · Heads: Up to 400 ft (120 m) · Motor Operating Temperature: NEMA Class B maximum operating temperature rise of 80°C (176°F)

The Flygt N-pump Series offers self-cleaning submersible pumps designed for high efficiency in wastewater, stormwater, and industrial effluent applications.

General performance range: up to approx. 3000 l/s

The Flygt CS 3400/805 is a submersible waste and raw water pump designed for municipal sewage, irrigation, and industrial applications.

Power supply: 1-phase or 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F)

The Flygt CP 3045 HT is a submersible C-pump designed for high-head applications with clean water or light wastewater.

Power supply: 1-phase or 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F)

The Flygt 3057 HT is a submersible pump designed for wastewater, sludge, and groundwater applications.

Power supply: 1-phase or 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F)

The Flygt 3045 is a submersible pump available in C-pump (high head) and D-pump (medium head vortex) models for various liquid types and installation configurations.

Power supply: 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F) (available as an option for non-explosion proof C, D, F, and N Standard pumps)

The Flygt 3102 series offers submersible pumps for various wastewater and fluid transfer applications, with specialized C, D, F, M, and N pump types available.

Liquid Temperature (Standard): 40°C · Liquid Temperature (Warm Liquid Version Option): max 70°C · Liquid Density: max 1100 kg/m³

The Flygt 2600 series pump is a portable unit designed for medium head applications. It features a wear-resistant Hard-Iron impeller with Dura-Spin™ technology and a...

Liquid Temperature (Standard): max 104°F (40°C) · Liquid Temperature (Warm Liquid Version Option): max 158°F (70°C) · Liquid Density: 9.2 lb. per US gal. (1100 kg/m³)

The Flygt 2630 is a portable, 3-phase submersible pump designed for high head or medium head applications.

Power: 5.6 kW · Liquid temperature: 40°C (standard) · Liquid density: max 1100 kg/m³

This Flygt 2640 series pump is a portable unit designed for dewatering applications, featuring a 3-inch discharge and a 5.6 kW, 3-phase motor.

Liquid density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer hole dimension: ø 0.39” (10.0 mm) · pH of the pumped liquid: pH 5–8

The Flygt 2660 is a portable dewatering pump designed for challenging mining, construction, and industrial applications.

Liquid Density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer Hole Dimension: ø 0.47” (12.0 mm) · pH of Pumped Liquid: pH 5–8

The Flygt 2670 is a portable high-head or medium-head pump designed for challenging applications.

Flow: Up to 7200 l/s or 120,000 USgpm · Power ratings: Up to 578 kW or 775 hp · Rating, kW at 50 Hz: 11–22

The Flygt 7045 is a submersible propeller pump designed for cost-effective transport of large volumes of water at low heads.

Optional monitoring channels via power analyzer PAN 312: Three-phase power, Power factor, System voltage, Voltage imbalance, Pump current, Current imbalance · Liquid temperature: Max. +40°C (+105°F) · pH of pumped liquid: pH 5.5–14

The Flygt 7061 is a large submersible propeller pump designed for moving high volumes of water at low heads in column installations.

Shaft Power (50 Hz): 0.75-2.2 kW · Shaft Power (60 Hz): 1.0-3.0 hp · Max. Nominal Thrust (50 Hz): 1.0-2.0 kN

The Flygt 4410 is a submersible mixer featuring a clog-free Banana Blade propeller for efficient mixing in applications like biological treatment and sludge holding.

Heads: Up to 90 ft · Speed: 3400 rpm · pH Range: 3-14

The CS/DS-3060.390 is a submersible solids handling pump designed for pumping water containing corrosive materials with a pH range of 3-14.

Speed of rotation: 3400 rpm · Discharge connection: 3”, 4”, 5”, 6” · Liquid temperature: max +40° C

The Flygt 2125.181 is a submersible dewatering pump designed for tough operating conditions.

Speed of Rotation: 3480 rpm · Discharge Connection: 3”, 4” · Liquid Temperature: max +40° C

The Flygt 2125.320 is a heavy-duty dewatering pump designed for abrasive liquids, sediment, and challenging conditions. It features a cast iron outer casing.

Discharge connection: 4”, 6”, 8” · Liquid temperature: max +40° C · pH of the pumped liquid: pH 5 - 8

The Flygt 2201.011 is a submersible dewatering pump designed for tough conditions, capable of handling liquids with abrasive solids such as clay, stone chips.

Speed of Rotation: 3430 rpm · Liquid Temperature: max +40° C · pH of Pumped Liquid: pH 6 –13

The Flygt 2201.320 is a submersible pump designed for heavy-duty dewatering in tough conditions, capable of handling abrasive and corrosive liquids.

Power: 65 kW · Speed of rotation: 1770 rpm · Discharge connection: 6”, 8”, 10”

The Flygt 2250.011 is a submersible dewatering pump designed for tough operating conditions and high sediment content. This 65 kW pump features an aluminum outer casing.

Speed of rotation: 3560 rpm · Discharge connection: 4”, 6” · Frequency: 60 Hz

The Flygt 2400.402 is a dewatering pump designed for tough conditions, handling liquids with high solids, abrasives, and corrosive elements.

Flow rates: Up to 7 l/s · Heads: Up to 14 m · Rated power [kW]: 0.42

The Flygt Ready 4 is a submersible drainage pump designed for demanding tasks with contaminated water containing sand and gravel.

Power Ratings: From 0.4 to 0.9 kW (general for series) · pH range: 5–8 · Frequency: 50 Hz

The Flygt Ready 8 is a submersible dewatering pump designed for construction, industrial sites, and emergency use.

Liquid density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer hole dimension: 0.29” (ø 7.5 mm) · pH of the pumped liquid: pH 5–8

The Flygt 2610 is a portable dewatering pump featuring an open impeller, Class F motor, and Spin-Out™ technology for seal protection.

Pump dimensions: 9½” W (max.) x 25” H (max.) · Max. weight: 66 lbs · pH Range (Stainless Steel 2700 Series): Ideal for pH values between 2 and 10

The Flygt BS/KS 2620.172 is a submersible dewatering pump designed for heavy-duty applications.

Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F) (Note: This option is not listed for M-pump 3068.175) · Liquid density: Maximum 1100 kg/m³

The Flygt CS/FS-3068 (SS) is a submersible pump available in various configurations for dewatering, wastewater, or sludge applications.

Speed of rotation: 2 680 rpm · Discharge connection: 3’’ · Frequency: 50 Hz

The Flygt BS 2720 is a corrosion-resistant drainage pump designed for efficient wastewater removal. It features a slim.

Speed of rotation: 2 840 rpm · Liquid temperature: max +40 °C · Liquid density: max 1100 kg/m³

The Flygt BS 2740 is a corrosion-resistant drainage pump optimized for extreme environments with unpredictable pH variance.

Speed of Rotation: 2 855 rpm · Range: Flygt 2700 pump range · Liquid temperature: max +40 °C

The Flygt BS 2750.390 is a corrosion-resistant drainage pump from the 2700 range, designed for submersible installation.

Power: 5.9 hp · Liquid Density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer Hole Dimension: ø 0.39” (10.0 mm)

The Flygt BS/KS 2830 is a portable, 5.9 hp, 3-phase submersible pump designed for high head or medium head applications.

Liquid temperature: 40°C (standard) · Liquid density: max 1100 kg/m³ · Strainer hole dimension: ø 10.0 mm

The Flygt BIBO 2840 is a portable submersible pump designed for demanding applications. It features a class H motor, wear-resistant Hard-Iron impeller.

Liquid density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer hole dimension: ø 0.39” (10.0 mm) · pH of the pumped liquid: pH 5–8

The Flygt BIBO 2860 is a portable dewatering pump designed for demanding mining, quarrying, and construction applications.

Liquid temperature: max 104°F (40°C), standard · Liquid density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer hole dimension: ø 0.47” (12.0 mm)

This Flygt BIBO 2870 is a portable dewatering pump designed for challenging mining and construction applications.

Selection cues: flow · head · power and wetted-part materials

The Flygt HS 5100.211 is an abrasion-resistant submersible slurry pump designed for pumping abrasive fluids, offering high wear resistance and dependability.

Selection cues: flow · head · power and wetted-part materials

The Flygt HS 5100.251 is an abrasion-resistant submersible slurry pump designed for high wear applications. It features a Class H motor.

Selection cues: flow · head · power and wetted-part materials

This is an abrasion-resistant submersible slurry pump designed for high wear resistance and dependability. It features a high-chrome cast iron impeller and volute.

Protection: Built-in thermal sensors for additional motor overload protection

The Flygt HS 5150.300 is a submersible pump designed for abrasive slurry applications, offering high wear resistance and dependability.

Selection cues: flow · head · power and wetted-part materials

The Flygt HS 5150.350 is an abrasion-resistant submersible slurry pump designed for high wear resistance and utmost dependability. It features a cast iron pump housing.

Selection cues: flow · head · power and wetted-part materials

This is an abrasion-resistant submersible slurry pump designed for high wear resistance and dependability. It features a high-chrome cast iron impeller.

Liquid temperature: Max. 40°C (105°F). Versions for liquid temperatures up to 70°C are available, with specific operational limitations stated on the pump plate · pH of pumped liquid: 6—14 · Voltage imbalance: Designed to operate with a voltage imbalance of up to 2 % between the phases

The Flygt HS 5530.181 is a submersible electric pump designed for pumping water containing abrasive particles, sludge, groundwater, or light slurries.

Selection cues: flow · head · power and wetted-part materials

The Flygt HS 5570.180 is an abrasion-resistant submersible slurry pump designed for high wear applications.

Flow Rate: Up to approx. 3000 l/s · Materials: Standard version in cast iron; industrial configurations available for more demanding applications · Seal Protection: Spin-out™ is a patented design that protects the outer seal by expelling abrasive particles from the seal chamber

These Flygt C-pumps are submersible units designed for waste and raw water applications. They feature Class H insulation, two sets of independent mechanical shaft seals.

Power supply: 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F)

The Flygt 3127.182 is a submersible D-pump with a vortex hydraulic design, suitable for liquids containing solids and abrasive media or light wastewater.

Rating, hp (kW): 3.1 (2.3) · Discharge Ø, in (mm): 3" (76) · Height, in (mm): 28" (715)

The Flygt D 2720 is a corrosion-resistant submersible dewatering pump designed for tough sludge and contaminated water jobs.

Flow Rates: Up to 16,000 US GPM (1,000 l/s) · Heads: Up to 400 ft (120 m) · Power Ratings: 2.2 hp to 870 hp

The Flygt N 3127.160 is a self-cleaning pump designed for sustained high efficiency in wastewater, stormwater, and industrial effluent applications. This model.

Liquid temperature: Max. +40°C (+105°F) · pH of pumped liquid: pH 5.5–14 · Liquid density: Max. 1100 kg/m³ (9.17 lb per gal.)

The P7045, P7050, and P7055 are large submersible propeller pumps designed for transporting large volumes of water at low heads.

Liquid temperature: Max. +40°C (+105°F) · pH of pumped liquid: pH 5.5–14 · Liquid density: Max. 1100 kg/m³ (9.17 lb per gal.)

The P 7020 and P 7040 are submersible propeller pumps designed for high-volume water transport at low heads.

Liquid temperature: Max. +40°C (+105°F) · pH of pumped liquid: pH 5.5–14 · Liquid density: Max. 1100 kg/m³ (9.17 lb per gal.)

The P 7076 is a submersible propeller pump designed for transporting large volumes of clean surface or storm water at low heads.