Prominent Sensors

Measuring range: approx. 0.01 ... 20 mS/cm · Electrical connection on the measuring device: 2- or 4-wire measuring line · Operating temperature: -5 ... 50 °C

The DULCOTEST LF/LFT/LFTK is a conductivity sensor for measuring electrolytic conductivity in aqueous media, featuring epoxy resin shafts and special graphite electrodes.

pH-range: 0 … 14 (1 … 12 for optimum service life) · Operating temperature: 0 ... 80 °C · Maximum pressure: 6 bar

The DULCOTEST PHEI 112 pH sensor is designed for general water applications in industrial and municipal wastewater, cooling water, process water.

Redox voltage: -1000 ... +1000 mV · Operating temperature: 0 ... 60 °C · Maximum pressure: 3.0 bar

The DULCOTEST RHES Pt SE is a redox sensor designed for applications such as swimming pool, whirlpool, and drinking water treatment.

Electrical connection: SN6 plug-in head, rotatable with a ProMinent cable · ORP voltage: -1500 ... +1500 mV · Temperature: 0 … 80 °C

The DULCOTEST RHEIC Pt SE is a potentiometric sensor for measuring ORP in various water applications, including wastewater, cooling water, and process water.

Temperature: 5 to 45 °C (BCR 1-mA, BRE 3-CAN-P) or 1 to 40 °C (CBR 1-mA, CBR 1-CAN-P) · Max. pressure: 1.0 bar (BCR 1-mA, CBR 1-mA, CBR 1-CAN-P) or 3.0 bar (BRE 3-CAN-P) · Intake flow: 30 to 60 l/h

DULCOTEST BCR sensors measure total available bromine from BCDMH and other oxidative disinfectants, as well as total chlorine in contaminated water up to pH 9.5.

Selection cues: measuring range · accuracy · output signal and process connection

The Prominent Sensors DULCOTEST CDE is a standard, membrane-covered amperometric sensor for measuring chlorine dioxide in clear, uncontaminated drinking water.

General Measuring Ranges: 0.01 – 200 mg/l, special measuring range up to 1,000 mg/l · Temperature Compensation: Integrated in most models, except for CLE 3-DMT and CLB series · Intake Flow: 30–60 l/h

The DULCOTEST CLB is a cost-effective amperometric sensor for measuring free chlorine in clear water and electrolysis processes. It operates at a maximum pressure of 3.

Temperature: 0 … 50 °C · Intake flow: Minimum: 0.05 m/s

The Prominent Sensors DULCOTEST DO sensors are designed for measuring dissolved oxygen in water.

pH range: 5.5 – 9.5 (optimized up to pH 9.5) · Electrical connection: SN6 plug-in head · Temperature: 1 – 35 °C

The DULCOTEST FLEP 010-SE and FLEP 0100-SE are potentiometric fluoride sensors utilizing a LaF₃ crystal for direct measurement.

Measuring ranges: 20 ppm to 100,000 ppm (10%). Specific orderable range: 20.0…2,000.0 mg/l. Measuring ranges up to 100,000 ppm available on request · Measuring range: 1...20, 10...200, 100...2000 mg/l, switchable · With 20 mg/l range: 5 µS/cm

The DULCOTEST PER is an amperometric sensor for measuring hydrogen peroxide in various water applications, offering precise real-time analysis.

pH-range: 1...12 · Temperature: 0...60 °C · Diaphragms: 3 ceramic diaphragms

This Prominent Sensors DULCOTEST PHEE 112 S is a pH combination probe designed for semi-solid or pasty media such as foodstuffs. It features three ceramic diaphragms.

Redox voltage/ORP: -1000...+1000 mV · Medium temperature: 0...80 °C · Conductivity: > 150 µS/cm

The DULCOTEST RHEN Pt SE is a redox combination probe with a platinum metal electrode and ceramic diaphragm designed for wastewater applications.

Temperature range: 5 … 40 °C · pH range: 4.0 … 11.0 · Measuring range: 0.02…2.0 mg/l

The DULCOTEST OZE is a sensor line designed for measuring ozone in water. Available in OZE3 mA and OZR1 mA variants, these sensors operate at a maximum pressure of 1.

pH range: 1.0 … 9.0 (peracetic acid stability range) · Output signal: 4…20 mA ≈ measuring range, temperature-compensated, uncalibrated, not electrically isolated · Temperature: 1 … 45 °C

The Prominent Sensors DULCOTEST PAA is a membrane-covered amperometric sensor designed for measuring peracetic acid in contaminated water.

pH-range: 0...12 · Temperature: 0...50 °C · Max. pressure: 7 bar

The Prominent Sensors PHEF 012 SE is a pH combination probe designed for use in aggressive solutions like those containing hydrofluoric acid.

Measuring range: 0 – 100 °C · Output signal: 4-20 mA · Electrical connection: SN6

These DULCOTEST temperature sensors are designed for direct measurement or temperature compensation in various water treatment applications.

pH range: 5.5 … 9.5 · Temperature: 5 … 45 °C · Max. pressure: 3.0 bar

The DULCOTEST CGE sensors are designed for the online measurement of total available chlorine, offering high resistance to surfactants and cyanuric acid.

pH range: 5.5 … 9.5 · Temperature range: 5 … 45 °C · Max. pressure: 3.0 bar

The DULCOTEST CTE sensors provide reliable online measurement of total chlorine, including free and combined forms.

Redox voltage (ORP): -1000...+1000 mV · Medium temperature: 0...60 °C · Conductivity: > 150 µS/cm

The DULCOTEST RHEK Pt SF is a redox (ORP) sensor designed for applications such as swimming pools and potable water.

Selection cues: measuring range · accuracy · output signal and process connection

The Prominent dulco turb c en L is an instrument for turbidity measurement.