Endress + Hauser Level measurement

Output signal: 4-20 mA interface (acc. to NAMUR NE 06/NE 43) · Status signals: LEDs indicate: Operation, Function check, Outside specification, Maintenance required, Failure, Power supply issues · Process temperatures: –60 to 280 °C (–76 to 536 °F)

The Liquiphant FailSafe FTL80 is a vibronic point level switch for minimum and maximum detection in liquids, suitable for highly corrosive media.

Process temperature range: –40 to +150 °C (–40 to +302 °F) · Ambient temperature range: –40 to +70 °C (plastic housing limited to –20 °C) · Process pressure range: Up to 40 bar (580 psi) at 150 °C (dependent on the lowest-rated component, e.g., process connection)

This Endress + Hauser Liquiphant FTL41 is a vibronic point level switch for maximum or minimum detection in tanks, containers, and piping with all types of liquids.

Process temperature range: –40 to +150 °C (–40 to +302 °F) · Process pressure range: Up to 64 bar (928 psi) · Process connections: Flange (ASME B16.5, EN1092-1), Thread (ISO228), Ingold, Flush-mounted tank connection, DIN11851, DIN11864-1, DRD, SMS1145, Varivent, Clamp/Tri-Clamp

The Liquiphant FTL43 is a point level switch for all pumpable liquids, ideal for hazardous areas and offering hygienic design certifications.

Density range: > 0.7 g/cm³ · Output signal: 4 to 20 mA HART · Measuring range: See official PDF for exact tabulated values

The Liquiphant FTL51B is a vibronic point level switch for liquids. It features HART communication and a process temperature range that requires reference to the official...

Process Temperature Range: –50 to +150 °C (–58 to +302 °F) · Process Pressure Range: Up to 40 bar (580 psi) · Ambient Temperature Range: –40 to +70 °C (–40 to +158 °F)

The Liquiphant FTL62 is a point level switch designed for all liquids, offering reliable detection in tanks and piping, even in hazardous areas.

Process temperature range: –50 to +150 °C (–58 to +302 °F) · Process pressure range: up to 64 bar (928 psi) · Ambient temperature range: –40 to +70 °C (–40 to +158 °F). Optional extended ranges down to –60 °C (–76 °F) with restricted operating life and performance

The Liquiphant FTL63 is a vibronic point level switch for detecting minimum or maximum levels in pumpable liquids across various applications.

Process temperature range: –60 to +280 °C (–76 to +536 °F) · Pressure range: Up to 100 bar (1 450 psi) · Measuring range: Depends on installation location and ordered pipe extension. Standard pipe extension up to 3 m (9.8 ft); up to 6 m (20 ft) on request

The Endress+Hauser Liquiphant FTL64 is a vibronic point level switch for all liquids, designed for hazardous areas and high-temperature applications up to 280 °C.

Ambient Temperature Range: -50 °C to +150 °C (depending on housing and electronic insert) · Process Connections: Various options available, including hygienic connections for H models · Process Temperatures: –50 °C to 150 °C (–58 °F to 302 °F)

The Endress + Hauser Liquiphant M FTL50 is a vibronic point level switch designed for all types of liquids in tanks or pipes.

Ambient Temperature Range: -50 °C to +150 °C (depending on electronic insert and housing) · Process Temperatures: –50 °C to 150 °C (–58 °F to 302 °F) · Pressures: Up to 100 bar (1450 psi)

The Endress+Hauser Liquiphant M FTL50H is a vibronic point level switch suitable for all liquid types in demanding applications.

Process connections: Flanges according to DIN/EN, ASME, JIS from DN 40 / 1½" · Ambient temperature range: Dependent on medium temperature. See official PDF for graph · Temperature: –50 °C to 150 °C (–58 °F to 302 °F)

The Liquiphant M FTL51C is a vibronic point level switch for detecting maximum or minimum levels in all types of liquids.

Process pressure range: Max. –1 to +40 bar (–14.5 to +580 psi) · Ambient temperature range: –40 to +70 °C (–40 to +158 °F) · Process Connections: Various threads available, including G ½", G ¾", G 1", MNPT ½", MNPT ¾", MNPT 1", R ½", R ¾", R 1". Weld-in adapters are also available

The Liquiphant FTL31 is a point level switch for liquids, designed for challenging applications where other sensors may fail.

Process pressure range: Max. –1 to +40 bar (–14.5 to +580 psi) · Ambient temperature range: –40 to +70 °C (–40 to +158 °F) · Process connection materials: 316L (1.4404/1.4435)

The Liquiphant T FTL33 is a vibronic point level switch for liquids, featuring robust stainless steel construction with EHEDG and 3-A certifications.

Ambient Temperature Range: –20 to +70 °C (–4 to +158 °F) · Switching Accuracy: ±2 mm (0.08 in) · Connection Options: M12 connector (optional with IP69 protection)

The Endress + Hauser Liquipoint FTW23 is a capacitance point level switch suitable for water-based, alcohol-based, and oil-based liquids, or powdered products.

Ambient temperature range: –40 to +70 °C (–40 to +158 °F) · Process temperature range: –20 to +100 °C (–4 to +212 °F); up to 150 °C (302 °F) for 1 hour · Process pressure range: –1 to +25 bar (–14.5 to +362.5 psi)

The Liquipoint FTW33 is a point level switch designed for hygienic applications in the food and beverage industry.

Control Current Range: 2.1 mA · Connection Cable Cross Section: Maximum 2.5 mm² (single core) or 1.5 mm² (two core) · Measuring Sensor Power Supply: Supplied by the FTL 325 N Nivotester

The Nivotester FTL325N is an isolating amplifier for level limit detection in hazardous areas and liquid detection in pipes.

Measuring Range: 4 to 20 mA signal (discrete depending on operating mode) · Signal Transmission: 4 to 20 mA as per NAMUR NE 43 with additional LIVE signal · Power Supply: Provided by the Nivotester FailSafe FTL825

The Nivotester FailSafe FTL825 is a two-wire system point level switch designed for fail-safe liquid detection in safety systems up to SIL3.

Supply Voltage Connection: To lower, green terminal blocks. Built-in fuse (AC: T 250 mA / DC: 400 mA). Reverse polarity protection included · Connection Cross-section: 1 x 2.5 mm² (1 x 14 AWG) or 2 x 1.5 mm² (2 x 16 AWG) · Measuring Range: Dependent on probe mounting location

The Endress + Hauser Nivotester FTW325 is a conductive point level switch designed for overfill protection, dry run protection.

Ambient Temperature Range: –50 to +70 °C (–58 to +158 °F). Restricted to –40 to +70 °C (–40 to +158 °F) with F16 housing · Medium Temperature Range: Varies with ambient temperature and housing type. High-temperature versions allow process temperatures up to 280 °C (536 °F) with corresponding ambient temperature limits · Medium Pressure Range: –1 to +25 bar (–14.5 to +362.5 psi)

The Soliphant M FTM50 is a vibronic point level switch for fine-grained bulk solids, offering SIL2 functional safety and resistance to buildup.

Process Temperature Range: Up to 280 °C (536 °F) · Medium Pressure Range: –1 to +25 bar (–14.5 to +362.5 psi) · Ambient Temperature Range: –50 to +70 °C (–58 to +158 °F) (–40 to +70 °C for F16 housing)

The Soliphant M FTM51 is a universal point level switch designed for fine-grained or dusty bulk solids, with options for potentially explosive atmospheres.

Medium Temperature Range: Up to 280 °C (536 °F) · Medium Pressure Range: –1 to +25 bar (–14.5 to +362.5 psi) · Ambient Temperature Range: –50 to +70 °C (–58 to +158 °F); –40 to +70 °C (–40 to +158 °F) with F16 housing

The Soliphant M FTM52 is a universal point level switch for fine-grained bulk solids, utilizing a vibronic measuring principle.

Measuring Range: Dependent on mounting location and selected pipe extension length (500 mm, 1000 mm, 1500 mm) · Ambient Temperature Range: –40 to +70 °C (–40 to +158 °F) · Limiting Medium Pressure Range: –1 to 25 bar (–14.5 to 362.5 psi)

The Endress+Hauser Soliphant T FTM20 is a vibronic point level switch designed for bulk solids, featuring a compact design and maintenance-free operation.

Measuring range: up to 12 m (39.37 ft) (with 40 mm antenna and flooding protection tube accessory) · Ambient temperature range (device): –40 to +60 °C (–40 to +140 °F) · Output signal: 4 to 20 mA (analog)

The Micropilot FMR10 is a free space radar sensor for level measurement in liquids within storage tanks and open basins. It features a full PVDF body.

Ambient Temperature Range: –40 to +60 °C (–40 to +140 °F) · Maximum Measuring Range: 10 m (33 ft) · Output Signal: 4 to 20 mA

The Micropilot FMR10B is a free-space radar sensor for continuous, non-contact level measurement of liquids and bulk solids.

Accuracy: Up to ± 2 mm (0.08 in) · Output signal: 4 to 20 mA with superimposed digital communication protocol HART, 2-wire · Antenna end process connection: PVDF

The Endress + Hauser Micropilot FMR20B is a free-space radar sensor for continuous, non-contact level measurement of liquids and bulk solids.

Maximum Measuring Range: Up to 30 m (98.4 ft) depending on antenna size and medium · Ambient Temperature Range: –40 to +80 °C (–40 to +176 °F) · Output Signal: 4 to 20 mA with superimposed digital communication protocol HART, 2-wire

This is a free-space radar level sensor for continuous, non-contact measurement of liquids and bulk solids, also capable of flow measurement in open channels.

Maximum measuring range: 15 m (49 ft) · Accuracy: ±1 mm (±0.04 in) · Output signal: 4 to 20 mA with superimposed digital communication protocol HART, 2-wire

The Micropilot FMR43 is a free-space radar transmitter for continuous, non-contact level measurement in hygienic applications.

Maximum Measuring Range: up to 10 m (32.8 ft) · Measuring Range: Maximum 10 m (32.8 ft) · Ambient Temperature Range: –40 to +80 °C (–40 to +176 °F). Bluetooth® connection may be affected above 60 °C (140 °F)

The Micropilot FMR20 is a free space radar sensor designed for level measurement of bulk solids up to 10 meters. It features a durable PVDF housing.

Maximum measuring range: 40 m (131 ft) · Range under reference conditions: > 10 m (33 ft) · Accuracy: ± 2 mm

The Endress+Hauser Micropilot FMR50 is a non-contact radar level instrument for continuous measurement of liquids, pastes, and slurries.

Maximum measuring range: 70 m (230 ft) · Accuracy: ± 2 mm · Output signal: HART (FSK ±0.5 mA over current signal, 1200 Bit/s, galvanic isolation)

The Endress + Hauser Micropilot M FMR51 is a free space radar level sensor for continuous, non-contact measurement of liquids, pastes, and slurries.

Maximum measuring range: 20 m (66 ft); For FMR54 with planar antenna in a stilling well: 38 m (125 ft) · Range under reference conditions: > 10 m (33 ft) · Accuracy: ± 6 mm

The Micropilot M FMR53 is a free-space radar level sensor designed for continuous, non-contact measurement of liquids, pastes, and sludges, featuring a rod antenna.

Process Temperature: –40 to +400 °C (–40 to 752 °F) · Process Pressure: –1 to +16 bar (–14.5 to +232 psi) · Operating Frequency: K-band (~ 26 GHz)

The Micropilot M FMR56 is a free-space radar instrument for continuous, non-contact level measurement of bulk solids. It features a PP-cladded horn antenna.

Maximum measuring range: 50 m (164 ft) · Ambient temperature range (Measuring device): –40 to +80 °C (–40 to +176 °F) · Ambient temperature range (Local display): –20 to +70 °C (–4 to +158 °F)

The Micropilot FMR60 is a free space radar instrument for continuous, non-contact liquid, paste, and sludge level measurement.

Maximum measuring range: 50 m (164 ft) · Temperature range (process): –40 to +200 °C (–40 to +392 °F) · Pressure range (process): –1 to +20 bar (–14.5 to +290 psi)

The Micropilot M FMR60B is a free-space radar transmitter for continuous, non-contact level measurement of liquids, pastes, and sludges.

Maximum measuring range: 80 m (262 ft) · Temperature range: –40 to +200 °C (–40 to +392 °F) · Pressure range: –1 to +25 bar (–14.5 to +362.6 psi)

The Endress+Hauser Micropilot FMR62 is a free-space radar level measuring instrument for continuous, non-contact level measurement of liquids, pastes, and sludges.

Maximum measuring range: 80 m (262 ft) · Accuracy: ±1 mm (±0.04 in) · Output signal: HART (FSK ±0.5 mA over current signal, 1200 Bit/s)

The Endress + Hauser Micropilot FMR62B is a free-space radar instrument for continuous, non-contact level measurement of liquids, pastes, and sludges.

Maximum measuring range: 80 m (262 ft) · Temperature range: –40 to +200 °C (–40 to +392 °F) · Pressure range: –1 to +25 bar (–14.5 to +363 psi)

The Endress+Hauser Micropilot FMR63B is a free-space radar level instrument designed for hygienic applications with continuous, non-contact liquid measurement.

Maximum measuring range: 50 m (164 ft) · Process temperature range: –40 to +130 °C (–40 to +266 °F) · Process pressure range: –1 to +16 bar (–14.5 to +232 psi)

The Micropilot FMR66B is a free-space radar level sensor designed for continuous, non-contact measurement of powdered to granular bulk solids.

Maximum Measuring Range: 125 m (410 ft) · Temperature Range: –40 to +200 °C (–40 to +392 °F) · Pressure Range: –1 to +16 bar (–14.5 to +232 psi)

The Endress+Hauser Micropilot M FMR67 is a free space radar sensor for continuous, non-contact level measurement of bulk solids.

Maximum Measuring Range: 125 m (410 ft) · Process Temperature Range: –40 to +450 °C (–40 to +842 °F) - Note: Ambient temperature limits vary based on housing material and process temperature. See Environment section for details · Process Pressure Range: –1 to +160 bar (–14.5 to +2 321 psi)

The Endress + Hauser Micropilot M FMR67B is a non-contact free-space radar transmitter for continuous level measurement of bulk solids.

Ambient temperature range (Standard): -40 °C to +80 °C (-40 °F to +176 °F) · Ambient temperature range (Custody transfer): -25 °C to +55 °C (-13 °F to +131 °F) · Process temperature range: -40 °C to +150 °C (-40 °F to 302 °F)

The Micropilot S FMR532 is a non-contact radar level transmitter designed for continuous measurement in custody transfer and inventory control applications.

Behavior if Measuring Range is Exceeded: Configurable; default is 22 mA current output and a digital warning (E651) · Process Temperature Range: -40 °C to +200 °C (-40 °F to 391 °F) · Accuracy: Better than 1 mm (0.04 in)

The Micropilot S FMR540 is a continuous, non-contact radar level transmitter for custody transfer and inventory control, offering accuracy better than 1 mm.

Maximum measuring range: 30 m (98 ft) · Level Accuracy: ±2 mm (0.08 in) · Ambient Temperature Accuracy: ±2 °C (4 °F)

The Endress+Hauser Micropilot FWR30 is a battery-operated free-space radar level sensor designed for remote and mobile applications.

Ambient temperature range: -20 °C to +60 °C (-4 °F to +140 °F) · Process temperature range: -20°C to +60°C (-4 °F to +140 °F) · Process pressure range: 0.7 bar to 3 bar abs. (10.15 psi to 43.5 psi)

The Prosonic FMU30 is a compact, non-contact ultrasonic transmitter for continuous level measurement of fluids, pastes, and bulk materials.

Pressure Range: 0.7 to 3 bar abs. (10.15 to 43.5 psi abs.) · Ambient Temperature Range: -40 to +80 °C (-40 to +176 °F). LCD display functionality limited below -20 °C and above +60 °C · Output Signal: 4 to 20 mA with HART protocol

The Endress + Hauser Prosonic FMU41 is a compact, two-wire transmitter utilizing ultrasonic technology for non-contact level and flow measurement of liquids and bulk...

Process temperature range: –40 to +80 °C (–40 to +176 °F) · Process pressure range: 0.7 to 2.5 bar abs. (10.15 to 36.25 psi) · Ambient temperature range: –40 to +80 °C (–40 to +176 °F)

The Prosonic FMU42 is a compact, two-wire transmitter utilizing ultrasonic technology for non-contact level and flow measurement in liquids and bulk solids.

Process Temperature Range: –40 to +80 °C (–40 to +176 °F) · Process Pressure Range: 0.7 to 2.5 bar abs. (10.15 to 36.25 psi) · Ambient Temperature Range: –40 to +80 °C (–40 to +176 °F)

The Endress + Hauser Prosonic FMU44 is a compact, non-contact ultrasonic transmitter for level and flow measurement. It features a PVDF sensor, HART protocol output.

Connection threads: G1", G1-1/2", NPT1", NPT1-1/2" (depending on version) · Suitable power supply unit: RNB130 from Endress+Hauser · Process temperature: –40 to +80 °C (–40 to +176 °F)

The Prosonic S FDU90 is an ultrasonic sensor designed for non-contact level measurement of liquids and bulk solids, and for flow measurement in open channels.

Maximum measuring range: 10 m (33 ft) in liquids; 5 m (16 ft) in bulk solids · Process connection: G 1" or NPT 1" (depending on version) · Suitable power supply unit: RNB130 from Endress+Hauser

The Prosonic S FDU91 is an ultrasonic sensor for continuous, non-contact level measurement of liquids and solids, as well as flow measurement in open channels.

Maximum Measuring Range: 10 m (33 ft) for liquids; 5 m (16 ft) for bulk solids · Range Chart: Provided to estimate the sensor range based on total calculated attenuation · IP66 protective housing for RNB130 power supply unit: Order number: 51002468

The Endress+Hauser Prosonic S FDU91F is an ultrasonic sensor for continuous, non-contact level and flow measurement in various applications.

Maximum transmitter connection distance: 300 m (984 ft) · Process connection: G 1" or NPT 1" · Process Pressure: 0.7 to 4 bar (10.15 to 58 psi)

The Prosonic S FDU92 is an ultrasonic sensor designed for continuous, non-contact level measurement of liquids and bulk solids.

Process pressure: 0.7 to 3 bar (10.15 to 43.5 psi) · Supply voltage: Provided by the transmitter (FMU90 or FMU95) · Electromagnetic compatibility: Meets EN 61326 series and NAMUR Recommendation EMC (NE 21). Designed for use in an "industrial environment"

The Prosonic S FDU93 is an ultrasonic sensor designed for continuous, non-contact level measurement of liquids and bulk solids.

Maximum measuring range: 45 m (148 ft) in bulk solids · IP66 protective housing for RNB130 power supply unit: Order number 51002468 · Maximum total length (sensor cable + extension cable): 300 m (984 ft)

The Prosonic S FDU95 is an ultrasonic sensor for continuous, non-contact level and flow measurement in liquids and bulk solids.

Measuring Range: Up to 45 m (148 ft) · Output Signal: Configurable as 4 to 20 mA with HART or 0 to 20 mA without HART. HART signal is on the first analog output only · Voltage Levels: 0: 16 V

The Prosonic S FMU90 is an ultrasonic transmitter for level and flow measurement in liquids or bulk solids, supporting one or two sensors.

Measuring range: Up to 45 m (148 ft), depending on the sensor and material · Measured value resolution: 1 mm (0.04 in) with FDU90/FDU91 · Measuring frequency: 0.2 Hz (5 sensors), 0.1 Hz (10 sensors)

The Prosonic S FMU95 is an ultrasonic transmitter for continuous, non-contact level measurement of fluids, pastes, sludge, and bulk materials.

Process temperature range: -20 to +450 °C (-4 to +842 °F) with optional high temperature adapter · Process pressure range: 0.5 to 21 bar (7 to 305 psi) absolute with optional high pressure adapter · Measuring range (Detection range): Maximum range is 5 m (196.9 in) depending on bulk solids (reflection characteristics). The range also depends on the container walls to be penetrated

The Solimotion FTR16 is an ultra-compact flow indicator designed for monitoring bulk solids transport processes.

Process temperature range: -40 to +450 °C (-40 to +842 °F) with optional high temperature adapter · Measuring range (Detection range): Maximum range is 20 m depending on bulk solids, with an unobstructed radiation path to the surface. The range also depends on the container walls to be penetrated · Operating frequency: 24 GHz ISM

The Solimotion FTR20 is a flow indicator designed for monitoring pneumatic and mechanical transport processes of bulk solids.

Process temperature range: -20 to +450 °C (-4 to +842 °F) with optional high temperature adapter · Process pressure range: 0.5 to 21 bar (7 to 305 psi) absolute with optional high pressure adapter · Measuring range (Detection range): Up to 20 m (787.4 in) with free path between FQR16 and FDR16. Range is also dependent on container walls

The Endress + Hauser Soliwave FDR16 is an ultra-compact microwave barrier for non-contact point level detection of bulk solids, liquids, and piece goods.

Process temperature range: -40 to +450 °C (-40 to +842 °F) with optional high temperature adapter · Measuring range (Detection range): Maximum 100 m (3937 in) with free path between FQR56 and FDR56. Range depends on container walls to be penetrated · Operating frequency: 24 GHz ISM

The Soliwave FDR56 is a compact, non-contact microwave barrier for limit detection in bulk solids and liquids.

Operating Temperature Range: -40 to +70 °C (-40 to +158 °F) · Output Signal: Serial signal for the FTR525 Nivotester. (The FTR525 Nivotester provides 4 to 20 mA, max. two relays or SSR, and open collector outputs) · Integrated Power: No separate supply voltage required; powered via the Nivotester FTR525

The Soliwave FDR57 is a microwave barrier used for non-contact level limit detection up to 100m and bulk flow detection up to 10m. It offers robust.

Density Measurement: Suitable for pipe outer diameters ranging from 48 to 273 mm (1.89 to 10.7 in) · Weight: Max. 18 kg (39.69 lbs) · Screening material: Lead (shutter), Lead and 304 (1.4301) (housing/source holder)

The FQG60 is a radiometric level measurement 11 GBq. It features a lightweight, compact design with optimized screening and is fire-resistant up to 821 °C for 30 minutes.

Swivel range: 180° · Compressed air connection: G1/8 · Width of emission: FQG61: 10 mm (0.39 in); FQG62: 12 mm (0.47 in)

The It offers safe and easy radioactive.

Flange connection: DN 100 PN16 or ANSI 4" 150 lbs · Maximum installation length (L): 30000 mm (1181 in) · Housing dimensions: 232 mm (9.13 in) height, 100 mm (3.94 in) width

The FQG63 is a It features a lightweight spherical design with lead screening and a flexible installation length up to 30 meters.

Compressed air connection: G1/8" · Compressed air connection G1/8": Swivel connector: Al, Seal: NBR, Banjo bolt: nickel-plated brass, Internal parts: brass · Screw diameter: M20 or G1/2

The Endress + Hauser It offers manual or pneumatic switch-on/switch-off operation and can accommodate up to 740 GBq of ¹³⁷Cs or 185 GBq of ⁶⁰Co radioactive.

Probe Rods & Process Connections: Highly corrosion-resistant materials for aggressive products. Specific materials include 316Ti, Alloy B, Alloy C4, PP, PTFE · Metal Process Connections: Refer to drawing (pressure/temperature diagram provided) · Operating pressure (pe): –0.2…+0.2 bar

This Endress+Hauser triple rod probe is designed for two-point control and limit detection in plastic or conducting vessels.

Ambient temperature range: 0 to +40 °C (32 to 104 °F) · Output signal: 4 to 20 mA, galvanically isolated · Electrical connection: For PLC, AI modules 4 to 20 mA in accordance with EN 61131–2

The Liquicap FTZ61 is a transmitter designed for capacitive foam detection in single-use bioreactors, mounting externally to non-conducting containers.

Measuring Range: 0.1 to 4.0 m (0.3 to 13 ft) · Temperature Range: -80 to +200 °C (-112 to +392 °F) · Process Connections: Flanges and threads available

The Endress+Hauser Liquicap M FMI51 is a capacitive level sensor for continuous measurement of liquids in a wide temperature range from -80 to +200 °C.

Measuring Range: 0.42 to 10 m (1.38 to 33 ft) · Materials: Process-wetted materials are corrosion-resistant, with FDA-listed options available · Process Pressure: Vacuum to +100 bar (+1450 psi)

The Liquicap M FMI52 is a capacitive level probe for continuous liquid measurement, offering independence from dielectric constant for media with conductivity above 100...

Ambient temperature range: –50 to +70 °C (–40 to +70 °C with F16 housing) · Storage temperature: –50 to +85 °C · Degree of protection: IP66, IP67, IP68, NEMA4X depending on housing type

The Liquicap M FTI51 is a capacitance point level switch designed for detecting liquids, including viscous media, pastes, and foam. It offers active buildup compensation.

Ambient Temperature Range (Electronic): -40 to 70 °C · Output Signal: 3.8...20.5 mA · Connection Voltage (FEI20): 10 to 30 V DC

The Endress + Hauser Liquicap T FMI21 is a capacitive level sensor for continuous measurement in conductive liquids.

Max voltage (U~max): 253 V (AC) · Max power (P~max): 1000 VA (cos ϕ = 1), 500 VA (cos ϕ > 0.7) · Current/Voltage ratings: 4 A for U ≤ 30 V; 0.2 A for U ≤ 253 V

The Endress + Hauser Minicap FTC260 is a capacitive point level switch designed for detecting bulk solids and liquids.

Process temperature range: –20 to +80 °C (–4 to +176 °F) · Process pressure range: –1 to +6 bar (–14.5 to +87 psi) · Ambient temperature range: 0 to 90 °C (32 to 194 °F) (refer to graph for specific limits)

The Endress + Hauser Nivector FTI26 is a capacitance-based point level switch designed for detecting minimum or maximum levels of powdered and fine-grained solids in...

Connection cross-section: Max. 1 x 2.5 mm² (14 AWG) or 2 x 1.5 mm² (16 AWG) · Output signal: Potential-free changeover contact for level alarm · Fault-signaling relay: Potential-free changeover contact for fault signaling

The Endress + Hauser Nivotester FTC325 is a point level switch with an intrinsically safe signal circuit suitable for liquid and bulk solid detection in hazardous areas.

Input Signal: Probe covered = high capacitance; Probe not covered = low capacitance · Measuring frequency: 500 kHz · Ambient Temperature Effect: < 0.06 % / 10 K related to full scale value (electronic insert); 0.15 pF/10K (capacitance change of connecting cable per meter)

The Solicap M FTI55 is a capacitance point level switch designed for reliable detection in bulk solids.

Process Pressure Range: –1 to 10 bar (–14.5 to 145 psi). Permitted pressure values depend on the selected flange · Process Connections: Flanges and threads (R 1½, NPT 1½) · Housing Materials: Aluminum (GD–Al Si 10 Mg), Polyester (PBT–FR), Stainless Steel (316L)

The Solicap S FTI77 is a capacitance point level switch designed for challenging bulk solid applications, including high temperatures and abrasive media.

Process temperature range: –196 to +450 °C (–320 to +842 °F) · Process pressure range: –1 to +400 bar (–14.5 to +5 800 psi) · Accuracy: ±2 mm (±0.08 in)

The Levelflex FMP51 is a guided wave radar instrument for liquid level and interface measurement, offering rod, rope, or coax probe options.

Accuracy (Level Measurement, Digital Output, ≤ 10 m): ±2 mm (±0.08 in) · Accuracy (Interface Measurement, Digital Output, > 500 mm): ±10 mm (±0.39 in) · Process connection: Flange

The Endress + Hauser Levelflex FMP55 is a guided-wave radar level transmitter for interface measurement in liquids. It offers rod, rope.

Accuracy (Analog Output): ±0.02 % of span · Process Connection: Thread (as of ¾") or flange · Process Temperature: –40 to +185 °C (–40 to +365 °F)

The Levelflex FMP56 is a guided-wave radar level measurement device designed for bulk solids. It offers rod or rope probe options and supports HART, Bluetooth.

Accuracy: ±2 mm (±0.08 in) · Power supply: External power supply required. Specific terminal voltages and maximum loads depend on the configuration (2-wire, 4-wire) and approvals · Process connection: thread ¾" or adapter flange

The Endress + Hauser Levelflex FMP50 is a guided-wave radar sensor for liquid level measurement.

PP process connections (DN 50, DN 80, DN 100, DN 150): Maximum 1.5 bar abs · PP process connections (2", 3", 4"): Maximum 22 psia · Metal process connections: Operating pressure and temperature depend on the specific connection (refer to drawing in the original document)

The Endress + Hauser 11362Z is a double rod probe designed for limit detection and two-point control in plastic or non-conducting vessels.

Limiting Medium Pressure Range: –1 to 10 bar (–14.5 to 145 psi) · Influence of Ambient Temperature: < 0.05 %/K · Non-hazardous area: –40 to 70 °C (–40 to 158 °F)

The Liquipoint T FTW31 is a conductive point level switch designed for overfill protection, dry running protection.

Ambient temperature range: –20°C to +120°C (0°F to 250°F) · Electrical connection: Two terminals for wires with spade terminals (M4 screws) · Without process connection: 0.41 kg

This Endress + Hauser 11371 is a partially insulated rod probe for conductive level limit detection in liquid foodstuffs.

Temperature Range: –40 °C to 200 °C · Pressure Range: up to 50 bar · Process connections: Corrosion-resistant steel 316Ti (1.4571)

This is a partially insulated rod probe for conductive level limit detection in process or storage tanks. It features a maximum probe length of 2000 mm, PTFE insulation.

Measuring Range: Dependent on probe mounting location; maximum probe length is 2000 mm · Process connections: Corrosion-resistant steel 316Ti (1.4571) · Ambient Temperature Range: Depends on fluid temperature and permitted interior temperatures of the connection housing

The Endress + Hauser 11961Z is a partially insulated rod probe for conductive level limit detection in various liquids.

Signal transmission: Closed current loop 0 to 5 mA, max. 12 V · Signal lines: 0.5 to 2.5 mm² (20 to 13 AWG) · Synchronization connection terminals (SYNC+, SYNC-): 12 VDC, 5 mA

The Gamma Modulator FHG65 is a radiometric system component designed to enhance measurement accuracy by suppressing background and extraneous radiation.

Output signal: 4 to 20 mA with HART protocol · 4 to 20 mA HART connection: Standard connection for HART communication and power. A HART resistor (typically 250 Ω) is necessary for low-impedance power supplies · Error signal: Indicated on display (symbol, code, description) and via current output (MAX/MIN values)

The Gammapilot FMG50 is a compact transmitter for non-contact level, interface, density, and concentration measurement in vessels.

Output options: Relay, 8/16 mA (passive), or 4 to 20 mA for system integration · Current Output (FEG25): Two-wire DC connection (11 to 36 VDC, 11 to 30 VDC for Ex ia). Suitable for PLCs and AI modules · FEG25 (Current Output): 11 to 36 VDC (11 to 30 VDC for Ex ia). Overvoltage category I. Reverse polarity protection: yes

The Endress + Hauser Gammapilot FTG20 is a non-contact radiometric point level measurement device for liquids, solids, and sludges.

Maximum Measuring Range: 90 m · Process Connection: Flange, hole dimensions DN100 PN16 according to EN 1092-1 · Input Signal: Remote operation via two inputs (active or passive)

The Silopilot FMM50 is an electromechanical level system for bulk solids and liquids, offering a measuring principle independent of physical properties.

Clamping range: 7 to 12 mm · Sensing weights: Steel, Stainless steel 316TI, Plastic (PVC), Medium bag (Polyester), Oval float (Stainless steel 316TI). Variants for separation layer detection are available as accessories · Tape running speed: 0.16 to 0.25 m/s

The Endress + Hauser Silopilot FMM20 is an electromechanical level system designed for light bulk solids and liquids in bunkers and silos.

Ambient temperature range: –20 to 60 °C (–4 to 140 °F) · Medium temperature range: –20 to 80 °C (–4 to 176 °F) · Process pressure range: ≤ 1.5 bar overpressure

The Soliswitch FTE20 is a rotary paddle point level switch designed for robust, reliable detection in bulk solids silos.