DOW EDI modules
2 models in this family. Representative models: EDI-210, EDI-310.
ملف علامة دولية
DOW, EDI modules
DuPont Water Solutions is a global water purification and separation portfolio built around recognized technologies such as FilmTec membranes, AmberLite resins, inge ultrafiltration, and related industrial separation materials.
Its influence comes from breadth: the same corporate water platform is used in drinking water, desalination, industrial reuse, pharmaceutical and food processing, electronics ultrapure water, and selective purification.DOW, EDI modules's position in electrodeionization (EDI) is defined by product families such as DOW EDI modules.
The portfolio is best understood inside ultrapure water, pharmaceutical water, power generation makeup, electronics rinsing, and final polishing after RO, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include EDI-210 and EDI-310.Selection should focus on feed conductivity, CO2 and silica load, module capacity, recovery, and power integration.
2
Indexed models
1
Product families
0
Subgroups
خطوط المنتجات ودليل الاختيار
كيفية اختيار Electrodeionization (EDI) من DOW,
يجيب هذا القسم عن سؤالين: ما خطوط المنتجات الرئيسية لدى DOW,، وما المعايير التي يجب مقارنتها قبل اختيار الطراز المحدد.
الخطوة 1: اختر خط المنتج حسب التطبيق
تشمل خطوط المنتجات الرئيسية في هذه الصفحة DOW EDI modules. ابدأ بهدف المعالجة وشكل المعدة وظروف التشغيل، ثم استخدم فهرس الطرازات أدناه لمقارنة المواصفات التفصيلية.
الخطوة 2: أكد الطراز بالمعايير الرئيسية
بعد اختيار خط المنتج، قارن feed conductivity, silica/CO2 load, recovery target, and stack configuration. كما يجب في مشاريع الاستبدال التحقق من شروط التركيب والواجهات والتوافق مع النظام القائم، وفي المشاريع الجديدة مراعاة التشغيل والصيانة وتوفر قطع الغيار أو المواد الاستهلاكية.
Product family overview
1 product family on this page.
Quick Model Index
Fast lookup for 2 indexed products
Search models, families, applications, or parameters; compare 2–4 candidates, save or export the shortlist, and open it on another device by link or QR code.
Showing 2 of 2 models
Select 2–4 models to compare. Your shortlist is saved on this device and can travel by link or QR code.
EDI-210
DOW EDI modules
Dilute Product Flow Rate: 6.6 to 10 gpm (1.5 to 2.2 m³/h) · Concentrate Inlet Flow: 2.2 to 4.5 gpm (0.5 to 1.0 m³/h) · Inlet Pressure (continuous operation): 36 to 80 psi (2.5 to 5.5 Bar)
The OMEXELL™ EDI-210 is a spiral wound Electrodeionization module designed to produce high-purity water by polishing RO permeate without chemical regeneration.
EDI-310
DOW EDI modules
Dilute Water Flow rate: 1.5 to 2.2 m³/h (6.6 to 10 gpm) · Max. Inlet Pressure: 6.9 bar (100 psig) · Max. Continuous Operating Pressure: 5.5 bar (80 psig)
The EDI-310 is a spiral wound Electrodeionization module designed for polishing RO permeate and producing high-purity water for industrial applications.
Brand Products & Technical Documents
2 product profiles with integrated document access
Each card keeps the curated model introduction and combines the readable datasheet page, OEM PDF, and official source. Product understanding and document access now share one card set.
DOW EDI modules
2 product profiles
Electrodeionization (EDI)
Product profile
EDI-210
The OMEXELL™ EDI-210 is a spiral wound Electrodeionization module designed to produce high-purity water by polishing RO permeate without chemical regeneration.
Electrodeionization (EDI)
Product profile
EDI-310
The EDI-310 is a spiral wound Electrodeionization module designed for polishing RO permeate and producing high-purity water for industrial applications.