Tóm tắt tài liệu kỹ thuật
ZW700B 250
PDF datasheet mirror for ZW700B 250 (SUEZ Ultrafiltration). Verify with OEM before design.
Summary
Product identification
- Model: ZW700B-250/UF10/7B/S/0.9/0.6
- Description: ZeeWeed 700B-250 Ultrafiltration (UF) module featuring SevenBore fiber technology with an inside-out flow orientation.
- Membrane Material: Polyether sulfone (PES)
- Membrane Type: SevenBore
- General Properties:
- UF membrane for optimal removal of particulates, bacteria, and viruses.
- PES membrane fibers with 7 bores provide high mechanical strength (>10x that of single fibers) and chemical resistance.
- Inside-Out filtration eliminates air scouring step and additional related equipment.
Mechanical / hydraulic
- Material housing & connector: PVC
- Element length (socket): 578 +/- 3.0 mm (22.75 +/- 0.12 inch)
- Element length (BSP threaded adaptors): 628 +/- 3.0 mm (24.72 +/- 0.12 inch)
- Distance permeate connector to feed connector (socket): 118 +/- 2.0 mm (4.65 +/- 0.08 inch)
- Distance permeate connector to feed connector (BSP): 144 +/- 2.0 mm (5.67 +/- 0.08 inch)
- Distance permeate connector to element center: 55 +/- 2.0 mm (2.17 +/- 0.08 inch)
- Permeate connection: ½ inch BSP thread
- Feed connection: ½ inch socket or BSP thread
- Housing OD: 50 mm (2 inch)
- Element OD: 50 mm (2 inch)
- Endcaps ID: 25 mm (1 inch)
- Weight: 0.7 kg (2 lbs.)
- Diameter bores ID: 0.9 mm (0.04 inch)
- Diameter fiber OD: 4.0 mm (0.16 inch)
- Area: 0.6 m² (6 ft²)
Operating limits
- Maximum operating temperature: 40°C (104°F)
- Maximum operating pressure: 5 bars (72.5 psi)
- Trans Membrane Pressure (TMP) at operation: <1.0 bar (<14.5 psi)
- TMP maximum: 2.5 bar (36 psi)
- pH range during operation: 2 to 11
Product water
- Permeate flow at 100 l/m²h: 60 l/h (0.26 gpm)
Cleaning
- Soaking time during cleaning: 5 minutes
- Cleaning pH range: 1.0-13.0
- Disinfecting Chemicals:
- Hypochlorite (NaOCl): 50 to 200 ppm
- Hydrogen Peroxide (H₂O₂): 100 to 200 ppm
Storage and handling
Elements are filled with glycerin for preservation. Store in a dry, normally ventilated location, away from heat, ignition sources, and direct sunlight, in the original packing. The storage temperature must be between 5°C and 35°C (45°F to 91°F).
Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or the full context of the original document. For contractual data, always refer to the official OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.