Tóm tắt tài liệu kỹ thuật
PT series
PDF datasheet mirror for PT series (SUEZ Ultrafiltration). Verify with OEM before design.
Summary
Product identification
The PT series consists of industrial ultrafiltration elements utilizing a polyethersulfone (PES) membrane with a 5,000-molecular weight cut-off (MWCO).
- Membrane: P-Series, Polyethersulfone
| Model | Spacer mil (mm) | Active area ft² (m²) | Outer wrap | Part number |
|---|---|---|---|---|
| PT8040C50 | 50 (1.27) | 264 (24.5) | Cage | 1240574 |
| PT8040F30 | 30 (0.76) | 340 (31.6) | Fiberglass | 1229772 |
Operating limits
- Typical Operating Flux: 5 – 20 GFD (8 – 34 LMH)
- Maximum Operating Pressure: 200 psi (1,379 kPa)
- Maximum Temperature:
- Continuous Operation: 122°F (50°C)
- Clean-In-Place (CIP): 122°C (50°C)
- pH range:
- Continuous Operation: 2.0-10.0
- Clean-In-Place (CIP): 1.0-11.5
- Maximum Pressure Drop:
- Over an element: 15 psi (103 kPa)
- Per housing: 60 psi (414 kPa)
- Chlorine Tolerance: 5,000 ppm days
Mechanical / hydraulic
| Model | Dimensions, inches (cm) A | Dimensions, inches (cm) B¹ | Dimensions, inches (cm) C² | Boxed Weight lbs (kg) |
|---|---|---|---|---|
| PT8040 | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 29 (13.2) |
¹ Internal diameters unless specified OD (outside diameter). ² The element diameter (dimension C) is designed for optimum performance in GE Water & Process Technologies pressure vessels. Other pressure vessel dimensions and tolerances may result in excessive bypass and loss of capacity.
Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.