Quay lại Microdyn-Nadir UF
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

Microdyn MD 090 TP 2N

PDF datasheet mirror for Microdyn MD 090 TP 2N (Microdyn-Nadir UF). Verify with OEM before design.

Summary

Product identification

  • MICRODYN® - MD 090 TP 2N Filter Module

Mechanical / hydraulic

  • Connectors
    • Concentrate: Backing Flange DN 80, DIN 2501
    • Permeate: Backing Flange DN 32, DIN 2501

Material

  • Housing: Polypropylene
  • Membrane: Polypropylene
  • Sealing: EPDM / Viton

Membrane and Module Data

  • Number of tubes: 41
  • Inner diameter: 5.5 mm
  • Pore size: 0.2 µm
  • Membrane area inside: 1.0 m²
  • Free flow area: 9.7 cm²

Operating limits

  • Membrane Operational Data
    • Max. transmembrane pressure inside to outside at 25 °C: 3.0 bar
    • Max. transmembrane pressure inside to outside at 60 °C: 2.0 bar
    • Max. backpulse pressure above outlet pressure at 25 °C: 2.0 bar
    • Max. backpulse pressure above outlet pressure at 40 °C: 1.5 bar
    • Processing temperature: 5 - 60 °C
    • Feed flow rate at axial velocity of 1 m/s: 3500 l/h
  • Housing Operational Data
    • Max. pressure: 3 bar
    • Max. temperature: 60 °C

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF. Contractual data must always match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.